–Model Number: 1SAJ520000R0101 UMC100
–Brand: Potentially ABB or a similar industrial automation manufacturer1
–Type: Motor Controller or Industrial Digital Controller23
–Input Voltage: May vary, typically compatible with standard industrial voltages
–Output Current/Power: Depends on the specific model and application
Series:
Likely part of a specific series or product line from the manufacturer, but the exact series name is not provided.
1.Parameters:
–Interfaces: Supports up to 8 different high-speed CAN bus interfaces1
–Data Transmission Rate: High-speed data transmission for real-time performance1
–Power Requirements: +3.3 VDC, +5 VDC, +12 VDC, -12 VDC1
2.Specifications:
–Compatibility: PCI Express interface card, compatible with NI PXI systems1
–Communication Protocols: Supports multiple CAN communication protocols1
–Operating Temperature Range: Not specifically mentioned, but typical industrial ranges apply2
3.Dimensions & Weight:
–Dimensions: Approximately 100mm x 50mm x 20mm
1.Parameters:
–Voltage: 24V1 or 240V2 (note the possible variance in specifications)
–Current: 100-400A1 (this range may depend on the specific application)
–Communication Interface: HDMI1 (unusual for industrial power distribution units; may be a misprint or specific to a custom application)
Exact dimensions are not provided directly for 3HAC026272-001, but a similar ABB product (DSQC 662) has dimensions of 165mm wide, 110mm deep, and 83.5mm high4.
–Dimensions: Approximately 170mm x 105mm x 32mm1 or a similar compact size for industrial automation modules
–Weight: Approximately 120g1, lightweight for easy installation and handling
1.Parameters:
–Measurement Accuracy: ±(4% FS + 2 digits), where FS stands for Full Scale1
–Spectral Response: 1000nm – 1700nm, with a center wavelength of 1400nm1
–Measurement Range:
– ×1 (0-1999 W/m²)
– ×10 (2000-19990 W/m², display value multiplied by 10)12
2.Specifications:
–Power Source: 9V alkaline battery (model 6F22)1
–Current Consumption: 2.7mA12
–Ethernet Processing Speed: 200 MHz (when used as an Ethernet interface module)3
–Operating Temperature: 0°C to 50°C (when used as an infrared measurement device)1; 0°C to 60°C (when used as an Ethernet interface module)34
–Compatibility: Designed to work with SCXI and PXI/SCXI chassis systems from NI1
–Connection Capability: Provides from 6 to 32 circuits for connecting input and output devices1
Specifications:
–Brand: National Instruments (NI)
–Model: SCXI-1313A
–Type: Data Acquisition and Signal Conditioning Terminal Block
–Communication: Integrated communications capability with a microprocessor1
Dimensions & Weight:
–Dimensions: Approximately 22.5 x 10 x 7.5 cm (9 x 4 x 3 inches)1
–Weight: Approximately 1.8 kg (4 pounds)1
–Voltage: 24V DC (-15%, +20%) and 120V DC (-15%, +10%)
–Current: Dependent on application, typically ranges from 100-400A for similar ABB modules1
–Output Frequency: 50HZ1
–Operating Temperature: -40°C to +70°C2
Specifications:
–Brand: ABB
–Model: CM572-DP
–Type: PROFIBUS Communication Module
–Maximum Transmission Rate: Up to 12 Mbits/s2
–Connectivity: Connects up to 31 slaves (125 with repeaters)3
Dimensions & Weight:
–Weight: Approximately 2KG1
1.Parameters:
–Operating Voltage: May vary depending on the application, but typically compatible with industrial voltage ranges.
–Output Frequency: Capable of controlling motors at various frequencies, potentially up to 60Hz1.
–Firmware Version: V2.9 or later, indicating advanced software capabilities2.
2.Specifications:
–Operating System: Supports Intel Celeron 650 or similar PLC-based operating systems2.
–Program Capacity: 256kbyte, allowing for complex control programs2.
–System Environment: Compatible with POWERLINK, a common industrial communication protocol2.
–Dimensions: Width: 891-1531mm (A wide range, possibly indicating multiple models or misinterpretation), Height and Depth not specifically mentioned but standard industrial module sizes apply.
