Processor type: MPC862P microprocessor
Processor speed: 96 Mhz
Memory: 32 megabytes
Power Supply: 24 volts DC (19.2-30 volts DC)
Power consumption: +24V Typical/Max: 160/250 mA, typical power consumption: 3.8W
Synchronization capability: There is a dedicated synchronization link to synchronize active and redundant SMS for hot insertion and online upgrades
Security Certification: SIL3 certification with high security integrity
Size and weight
Net weight: 0.6kg
Shipping weight: 1.6kg
Model: IPS21-35AD
Voltage: 24V
Operating voltage standard: VV (but the specific value is not clear)
Communication rate: Supports a variety of rates, including 9.6kBit/s to 12MBit/s
Optical fiber interface: Supports 155M optical fiber interface, and the optical fiber distance can be more than 20km
Power supply design: Support DC9-36V wide redundant dual power supply, with DC1500V power isolation and reverse protection functions
trait
High speed long distance transmission: Support high speed long distance reliable transmission
A variety of network topologies: support point-to-point communication, chain network, star network, redundant dual network and fiber ring network self-healing protection and other network connection methods
Redundant dual network and optical fiber ring network: Supports logically independent dual Profibus DP buses to achieve redundant dual network optical fiber ring network topology and improve system reliability
Type: High speed switching device
The main function: to achieve extremely short switching time, usually within a few milliseconds to complete the power switch, to minimize the load equipment power failure time.
Starting mode: Support manual starting, low voltage starting and protection device starting and other starting modes.
Switching mode: including fast switching, first in-phase switching, delay switching and residual voltage switching.
Configuration: Supports configuration and operation through a human machine interface (HMI), integrating existing protection devices and circuit breakers.
Features: With four different configurations of switching modes, suitable for two to three circuit breaker configurations, support flexible communication protocols, with fault recording function and watchdog self-test function, integrated various security functions.
Voltage: Depending on the search results, the voltage of UAC389AE02 may vary depending on the application scenario. One message indicates that its voltage is 220V, while another indicates that its operating power supply is 24VDC.
Current: There is information that its current is 5A, but this data may not be comprehensive, because the current requirements in different application scenarios may be different.
Resistance: 5 Ohms.
Output frequency: 230.
Input power: In some application scenarios, the input power is AC 220-25A, 50Hz, but this may not be suitable for all cases.
Size and weight
Size: The exact size may vary by manufacturer or product model. One information states that its specification is 121212, but another information states that its specification is 5SHX2645L0004mm, which may not be accurate or applicable in all cases. There is also information indicating a size of 718062, but this data may be specific to a certain application scenario or product model.
Weight: Information indicates that it weighs 2KG
Power supply voltage: 24V DC
Rated current: 5A
Maximum current: 10A
Output power: Different sources give different data, may be 120W or 360W
Response frequency: 500Hz
Accuracy: ±0.05%FS
Output voltage: 24VDC
Input voltage range: 10~30VDC
Maximum output current: Maximum 5mA per channel
Operating temperature range: -25~70℃
Size and weight
Size: Different sources give slightly different size information, perhaps 8.0 “x 2.0” x 13.0 “(20.3 cm x 5.1 cm x 33.0 cm), or 96mm x 48mm x 16mm.
Rated operating voltage: Maximum 690V.
Current: 370A, there is also information indicating that the current range is 100-400A, but the specific may vary by model or configuration.
Power: 200kW.
Control power supply voltage: 100-250 V, 50/60 Hz.
Coil voltage: 100-250 V.
Number of starts per hour: The specific number is not directly given, but the PSTX series soft starters have the function of limiting the number of starts.
Size and weight
Size: Depending on the source, the size may vary. One saying is 1164930, another saying is 132mm105mm52mm.
Weight: 2KG
Input voltage: 24VDC
Output voltage: 24VDC
Output points: 8 isolated points
Operating temperature range: -40℃~85℃
Output current range: 4~20mA
Resolution: 12 bits
Output accuracy: less than 0.25%
Communication protocol: Ethernet /IP, may also include Modbus, CAN bus, etc
Enclosure protection class: IP67
Size and weight
Product size: 40×40×30 (unit may be mm)
Product weight: 3.5 kg
Type: Field control processor, ARM system-on-chip (SOC) with stored programs, using high-speed communication capabilities.
Memory: 128MB SDRAM and 128MB flash, memory allocation is 15.75MB.
Voltage: 24V (Note that the voltage may vary depending on the application scenario and configuration).
Current: 100-400A (This current range may indicate the range of input/output currents that the device can handle, rather than the power consumption current of the device itself).
Processor performance: Three times the performance of older controllers, delivering outstanding performance even in the most demanding applications.
Size and weight
Size: 14.7cm x 5.18cm x 11.6cm.
Weight: 0.8 kg (product itself), shipping weight is 2 kg.
Processing power: The FCP280 RH924YA has an ARM system-on-chip (SOC) with stored programs, using high-speed communication capabilities.
Memory: Equipped with 128 megabytes of SDRAM and 128 megabytes of flash memory, the block’s memory allocation is 15.75 MB.
Communication capability: Supports up to 128 compact or standard 200 series FBMS, or up to 128 combination of 100 series FBMS and 200 series FBMS (no more than 64 100 series FBMS in this configuration) without the need for a fieldbus communication module.
Network connection: Connect to the Mesh control network system via standard fiber or copper 100 Mbps Ethernet cable.
Size and weight
Dimensions: The FCP280 RH924YA measures approximately 14.7 cm x 5.18 cm x 11.6 cm.
Weight: Its weight is 0.8 kg and its shipping weight is 2 kg.
series
The FCP280 RH924YA belongs to the FOXBORO brand’s family of field control processors.
Input voltage range: 12VDC~48VDC, or 12-30VDC.
Maximum current: continuous 8A, peak 18A.
Maximum output power: 8W.
Maximum output torque: 10Nm.
Communication interface: EtherCAT, RS422, CAN Bus.
Operating temperature range: generally said -40°C ~+85 °C, another said -40°C to +70°C.
RAM size and speed: 64MB@133MHZ is mentioned in some descriptions, but this information may not be directly applicable to all RMP201-8 models, as the RMP201-8 is primarily used as a controller, and its RAM and processor speed may vary depending on the specific application or model.
Size and weight
Dimensions: 200 mm x 200 mm x 50 mm, or alternatively 20.3cm (may refer to dimensions in a particular direction).
Weight: 1.2kg, but 10kg is mentioned in another description
Model and specification: MSK076C-0450 indicates that this is a servo motor with specific parameters and specifications.
Winding code: 0450 is the winding code of the motor, which determines the electrical characteristics and performance of the motor.
Encoder: The motor is equipped with an incremental encoder that provides precise position and speed feedback, making the control of the motor more precise and reliable.
Cooling method: The motor is cooled by natural convection, and the heat is dissipated by natural air flow, so as to maintain a stable operating temperature.
Size and weight
Weight: 0.98Kg
trait
High accuracy: The equipped incremental encoder provides precise position and speed feedback.
High reliability: Suitable for industrial automation and control systems that require high reliability.
Brand & Manufacturer: The PM825 is a product from ABB.
Type: High performance Programmable logic Controller (PLC), part of ABB’s decentralized control system.
Processor: Based on the MC68360 microprocessor, running at 25MHz in 16-bit mode.
Memory: The system and user applications are stored in 1024 KB and 512 KB of FLASH, respectively, while 1024 KB of RAM is used for system and user application execution.
Electrical parameters:
Current: Depending on the application scenario, the current may vary, such as 5A or 1.56mA (specific parts), and there are claims that the current range is 100-400A.
Voltage: 220V or 24V.
Resistance: 5 Ohms.
Output frequency: 230.
Size and weight
Size:
Product net depth/length: 225 mm.
Product height: 108 mm.
