Grid view List view

Showing 18625–18636 of 24490 results

IC200ALG260E

¥3,625.00
Parameters and specifications:
Type: Analog input module
Series: GE Fanuc Versamax series
Number of channels: 8 single-ended channels in a group
Voltage range: -10 to +10 volts DC, 0-10 volts DC
Current range: 4-20 mA
Update rate: 0.4 ms
Input filter response: 5.0 ms
Power consumption: 130 mA from the +5V bus
Resolution: 16 bits

BMXNRP0201

¥6,235.00
Parameters and specifications:
Type: photoelectric conversion module.
Function: Provides communication between two or more Quantum EIO nodes or network segments via optical cable.
Interface type: Each fiber optic converter has two Ethernet network interfaces and two fiber optic interfaces for media conversion from copper cable to optical cable and from optical cable to copper cable.
Fiber interface: Available in 2 models, the BMX NRP 0200 uses multimode fiber for distances up to 1.24 miles (2 km); The BMX NRP 0201 uses a single-mode fiber optic link for distances up to 9.32 miles (15 km).
System environment: Suitable for Schneider environment.
Output frequency: 24Hz.
Program capacity: 256kbyte.
Size and weight:
Size: Specification 2000mm (may be length).
Weight: About 0.9kg.

1C31224G01

¥6,235.00
Parameters and specifications:
Function: This is an analog input module that provides hot-swappable surge protection with a status indicator.
Type: Used as an analog input card as part of the Westinghouse DCS card kit for Emerson OVATION Systems.
Support network: Support high-speed, high-capacity fast Ethernet control and communication network.
Controller: Fully redundant Pentium PC controller used in the standard bus architecture.
User interface and Database: Equipped with Windows NT or Solaris user interface and embedded Oracle relational database management system.
Series:
1C31224G01 is a specific analog input module from brands such as Emerson or Westinghouse that is part of an industrial automation system.

140CPS12420

¥5,623.00
Parameters and specifications:
Input voltage/Power supply type: 230V AC 170 to 276V or 115V AC 93 to 138V, 47 to 63Hz/ Redundant
Output current: 600mA 230V or 1100mA 115V.
Instantaneous peak current: 38A 115V or 19A 230V.
Rated power VA: 130VA.
Relevant fuse grade: 2A slow break type.
Harmonic distortion: <=10% basic RMS.
Power output current: 10A 60℃ redundancy; 11A 60 ° C independent.
Power consumption: 6+(1.5x output current), where the output current unit is A.
Product Certification: CUL.

VE4005S2B1

¥5,124.00
Parameters and specifications:
Input voltage: 24V DC.
Output power: 10W.
Frequency (speed) measurement range: 0.5Hz-20 kHz.
Output voltage linear range: -4… -20V (the supply voltage is -24V).
Maximum range of output voltage: -1… -22V.
Output voltage: -12V (symmetrical measurement range at both ends).
Internal resistance: 100k.
Response time: 15.

140ACI04000

¥4,125.00
Parameters and specifications:
Input quantity/Power consumption: 16 channels, power consumption 5W.
Address Requirement: 17 Enter a word.
Analog input resolution: multiple modes, such as 0 ~ 4095 count (4 ~ 20mA); 0 ~ 25000 count (0 ~ 25mA); 0 ~ 20000 count (0 ~ 20mA); 0 ~ 16000 count (4 ~ 20mA).
Absolute maximum input: 30mA.
Input impedance: 250 ohms.
Absolute accuracy error: +/-0.125% full scale.
Linearity error: Max +/ -6μA (4 ~ 20mA, 0 ~ 25mA, 0 ~ 20mA); Max. +/-12 μA (4 ~ 20mA).
Temperature deviation accuracy: <= 0.0050% full scale /℃; +/ -0.0025% full scale /℃.
Common mode suppression: >-90dB 60Hz.
Fault type: Disconnected (4 to 20mA).
Required bus current: 360mA

3008

¥5,412.00
Parameters and specifications:
Body dimensions: length 4435mm, width 1840mm, height 1652mm, wheelbase 2613mm.
Engine type: Available with 1.6T L4 and 2.0L L4 engines.
Drive mode: front-to-front.
Standard seating capacity: 5.
Luggage capacity: 503L/512-1604L.
Fuel consumption: 6.4 to 8.8 L/100km.
Tank capacity: 60L.
Maximum speed: 204 km/h.
Acceleration time: 0-100km/h acceleration time is 10 seconds.

IC695ETM001

¥3,652.00
Parameters and specifications:
Working voltage: 24VDC.
Operating temperature: -40℃ to 70℃.
Operating humidity: 5% to 95%.
Communication rate: 10/100 Mbps transmission rate is supported.
Communication protocol: Ethernet /IP.
Supported chip: FPGA.
Ethernet processor speed: 200 MHz.
Data transfer rate (RS-232 serial port) : 1200 bps to 115200 bps.
Size and weight:
Dimensions: 125mm x 72mm x 138mm.
Weight: About 0.5kg.

SJDE-04ANA-OY

¥4,261.00
Parameters and specifications:
Since the specific technical parameters and specifications may vary with different product models and versions, I cannot directly give the detailed parameters and specifications of SJDE-04ANA-OY. But in general, the main parameters of the servo driver may include the power supply voltage, output current, control signal type, response frequency, and so on.
Series: SJDE-04ANA-OY belongs to the servo drive family of Yaskawa Electric.

P0922YU

¥5,262.00
Parameters and specifications:
Power input:
Input voltage range: 85 to 265 volts AC or 108 to 145 volts DC, nominal 125 volts DC.
Input frequency range: 47 to 63 Hz.
Input current: 5.6A (RMS maximum) for 85 V AC input, 2.5A (RMS maximum) for 230 V AC input.
Power output:
Output voltage: 24.0 V DC, 0.2 V DC nominal factory Settings.
Voltage line adjustment rate: 2.0% of Vout.

TSXP573623

¥5,264.00
Parameters and specifications:
Functional features:
Outstanding: Boolean instruction execution time only 37ns, numeric instruction only 45ns.
Application experts: Provide weighing, counting, process control, position control, safety and other special functional modules.
Excellence: The new Untiy software combines the benefits of Concept and PL7 to provide an integrated PLC emulator.
Value for money: Provides processors with integrated Ethernet and Fip bus, excellent performance and economical price.
Hot spare redundancy: Based on Modicon Qutumum’s proven hot spare technology.
Communication: The backplane bus communication rate is a constant 12Mbps, using the standard industrial Ethernet protocol Modbus TCP/IP specified by the national standard GB/Z19582-3, the application layer adopts the open Modbus protocol, the communication rate is not less than 100Mbps.

CC-TAOX11

¥6,205.00
Parameters and specifications:
Supported controller models: T8000R, T8000RP, T8000RX, etc.
Output type: analog current, analog voltage.
Output accuracy: ±0.1%.
Output range:
Analog current: 4 mA to 20 mA.
Analog voltage: 0 V to 10 V.
Communication interface: RS-485, Modbus RTU, etc.
Operating temperature: -40°C to +85°C.
Storage temperature: -55°C to +90°C.