Processor: Freescale 8349,667 MHz processor.
Operating system: Runs on the QNX operating system.
Power supply specification: Rated voltage is 18~36V DC, power is 12 watts.
Operating temperature: between 0 and 65 degrees Celsius.
Cooling method: Natural cooling, no fan required.
Application level: complies with NFPA Class 1 zone 2 specifications.
Communication interface: including Ethernet interface, serial port, etc., used for data exchange with other devices, control systems or networks.
Motor power range: 0.12~ 200kW
Torque range: 85~18000 nm
Ratio range: 5~28000
Input speed range: 750 to 3000 rpm
Output speed range: 0.05~500 rpm
Rated voltage: 380 V
Rated frequency: 50 Hz
Rated current range: 1.5~350 A
Efficiency: Up to 97%
Noise level: less than 80 dB
Size and weight
Overall dimensions: 132mm×105mm×52mm
Weight: 0.82 kg
Power supply: 220VAC AC.
Power range: from 50W to 3000W.
Communication interface: Support USB, RS232, RS485 and CAN bus communication.
Protocol support: Supports MOTECIAN, MODBUS, and CANOPEN protocols.
Operating system: QNX operating system.
specification
Type: Intelligent servo drive, which is also the main trip package for the main turbine of the Mark VI system.
Function integration: Integrated PLC and motion controller, support ladder diagram programming.
Processor type: High-performance processors, which may include the Atom™ E 3800 series
Memory: Up to 4GB ECC RAM and up to 32GB EMM are supported
Communication protocol: compatible with picmg express r 2.1 and Type 10
Communication rate: from 2400bps to 115200bps
Measurement speed: 10 times/SEC or 80 times/SEC, can be selected by parameter setting
Resolution: Display resolution is 1/100000
Nonlinear error: no more than ±0.05%F•S (10 times/s)
Power supply: DC power supply 12 ~ 30VDC, with anti-reverse protection
Current rating: 1960 A.
Voltage rating: 6000 V.
Switching speed: 10 kHz.
Control mode: pulse trigger.
Heat dissipation mode: air cooling.
specification
Housing size: 250 mm x 150 mm x 75 mm.
Possible applications: power control, converters, energy regulation, motor speed regulation, industrial heating, lighting control, energy feedback, etc.
Size and weight
Dimensions: As mentioned above, the housing dimensions are 250 mm x 150 mm x 75 mm.
Industrial grade design: with vibration resistance, electromagnetic interference resistance and durability, can operate stably in harsh industrial environments
Modular design: easy for users to expand and upgrade, improve system flexibility and maintainability
Multiple input and output channels: Ability to monitor multiple process variables and perform related operations, flexible response to a variety of complex control needs
Communication interface: Equipped with Ethernet or serial communication interface, easy to connect and communicate with other devices or systems
Data acquisition and monitoring: It can collect various data and signals during the operation of the gas turbine, providing the operator with rich information to monitor and analyze the performance of the gas turbine
Type: PXI Embedded controller
Manufacturer: National Instruments (NI)
Operating system: Factory installation Win10(64-bit) and drivers
Size and weight
Dimensions: 115mm x 48mm x 150mm
Weight: Approx. 1.2kg (another saying is 2KG, may vary depending on configuration or version)
series
The PXIE-8840 is part of NI’s PXI family of controllers
Power supply: 220VAC AC.
Power range: from 50W to 3000W.
Communication interface: Support USB, RS232, RS485 and CAN bus communication.
Protocol support: Supports MOTECIAN, MODBUS, and CANOPEN protocols.
Operating system: QNX operating system.
specification
Type: Intelligent servo drive, which is also the main trip package for the main turbine of the Mark VI system.
Function integration: Integrated PLC and motion controller, support ladder diagram programming.
Control mode: Position control mode, speed control mode and current (torque) control mode.
A USB port.
Two distributed as interfaces.
Four remote AS interfaces.
Six local Modbus Plus connections.
Six local Profibus DP connections.
A Modbus connector.
Six local Ethernet TCP/IP connections.
Optional modules: Ethernet, Modbus, Modbus Plus, Profibus, DP, and Sy/Max.
Size and weight
Weight: According to the description of a specific product, the weight is about 0.3673 kg.
I/O Points: 20 universal I/O points that can be configured as digital input, digital output, analog input, or analog output.
Voltage range:
Digital input: 24 VDC
Digital output: 24 VDC
Analog input: 0-10V or ±10V
Analog output: 0-10V or ±10V
Resolution: Input/output simulation: 16 bits
Accuracy: Analog input/output: ±0.1%FS
Scanning time: <2 ms
Power supply voltage: 24 VDC
Operating voltage: Multiple voltage ranges may be supported, but the specific value depends on the application scenario. It is mentioned that the input voltage range of similar products is 12-48VDC, but for the specific operating voltage of CI867 3BSE043660R1, you may need to consult the official documentation or contact the manufacturer for accurate information.
Current: For current parameters, such as output current, you also need to refer to the official documents. It is mentioned that the output current of similar products can be up to 10A, but this may not be applicable to CI867 3BSE043660R1.
Communication protocol: Support for Modbus TCP protocol, an open industry standard widely used in industrial automation systems.
