brand : Rexroth
Model : MHD041B-144-PG1-UN
Type : synchronous motor
power : 1020VDC
frequency : 1405Hz
channel : channel 6
Power capacity : 1120W
Weight : 2.9Kg
size : motor frame size is 82mm flange size, 50mm centering diameter, 2.7Nm motor frame length
Input channels: 16 channels.
Input type: DC input.
Input voltage range: 0-60VDC.
Input current range: 3.5-30mA.
Input impedance: 3.3kΩ.
Response time: 1ms.
Communication interface: VME.
Operating temperature range: 0-60℃.
Processor: Typically based on the MPC7455 1GHz CPU or Freescale MPC8540 PowerQUICC III processor, providing the device with powerful computing power and processing speed.
Memory: Equipped with 512MB ECC SDRAM or up to 2GB DDR2 memory, ensuring high-speed data transmission and stability.
Ports: Provides Gigabit E-NET (ENET) connections, supports dual PCI and Peripheral Component Interconnect (PMC) interfaces, and other I/O interfaces, such as serial ports, USB 2.0 ports, and CAN ports.
Control principle: The controller can accurately control the excitation current to ensure the normal operation of the motor or other equipment, with high-precision current detection and control algorithms.
Communication options: Include Ethernet, cellular, and industrial protocols such as MODBUS, DF1 Slave, J1939, CAN Open, and more. In addition, it can “teach” communication over almost any ASCII protocol.
Internal memory: The stored application logic is 512K, fonts are 128K, and images are 256K.
Size: There are two different size descriptions. One is 220 x 160 x 80mm and the other is 120mm x 80mm x 40mm. This may reflect size differences between models or versions.
Processor: High-performance industrial-grade processors ensure efficient handling of complex control tasks and data processing requirements.
Memory: Equipped with large-capacity memory and storage space for data processing and storage.
Communication interface: With Ethernet, serial interface (RS-232/RS-485), USB and other communication interface, support with a variety of field equipment and host computer communication.
Power requirements: Support DC or AC power input, depending on the model.
Operating temperature: With a wide temperature range design, suitable for various industrial environments.
Protection level: Usually with IP grade (such as IP65/IP67), dust and water resistant, suitable for harsh industrial environments.
Working voltage: 24V DC.
Operating temperature: -40℃ to 70℃.
Number of modules: Up to 16.
Communication interface: Support Profibus DP, Modbus RTU, Ethernet/IP and other communication protocols.
Size: 8.2×12.2x6cm.
Weight: 0.36kg.
Operating voltage: Its operating voltage range is between 220v-380v, strong adaptability, and can operate stably in a variety of industrial environments.
Working environment temperature: can work normally in the range of -30°C to +85°C, showing good temperature adaptability.
Size: Specific size information may vary slightly from supplier to supplier or product batch. For example, in some descriptions the dimensions are indicated as 21012560mm, while in others the dimensions are 100mm x 100mm x 50mm. Therefore, in practical applications, be sure to refer to the product manual or contact the supplier for accurate dimensional information.
Weight: Its weight is 0.82kg.
Model : PFTL101B 2.0KN
flash : 6 MB
Input voltage : -0.6 V DC
Operating temperature range : -20°C to +50°C
Storage temperature range : -40°C to +70°C
Diagnostic bus : 2 Mbps HDLC
Weight : about 120g
Dimensions : 170mm x 105mm x 32mm
Motor power: range 0.12~ 200kW.
Torque range: 85~18000 nm.
Ratio range: 5~28000.
Input speed range: 750 to 3000 rpm.
Output speed range: 0.05~500 rpm.
Installation position: Multiple installation positions from M1 to M6 are available.
Ambient temperature range: -20°C to +40°C.
Rated voltage: 380 V.
Rated frequency: 50 Hz.
Rated current: 1.5~350 A.
Power supply function : The UES815S power module can be mounted directly on the printed circuit board, and provides power for digital or analog loads such as ASIC, DSP, microprocessor, memory, FPGA
protective function : the module has built-in overcurrent, overheat, short circuit and other protective functions to ensure the safety of electrical equipment
modular design : easy to install, repair and replace
High reliability : well designed for stable operation in harsh environments
widely used : widely used in switching equipment, access equipment, mobile communication, microwave communication, optical transmission, router and other communication fields as well as automotive electronics, aerospace and other fields
Number of channels: 32 channels.
Switch type: SPST (single pole single throw).
Frequency range: DC to 3GHz or possibly up to 500MHz.
Maximum switching speed: 100 times/SEC.
Rated current: 1A.
Maximum power: 15W.
Operating temperature: recommended from 0°C to 50°C, storage from -20°C to 70°C, non-condensing humidity from 5% to 85%.
Dimensions: 1.2 x 6.8 x 7.8 inches (30 x 173 x 198 mm).
Model and specification: PFTL101A 1.0kN 3BSE004166R1, where “1.0KN” means its measuring range is 1.0KN.
Usage: Usually used to measure and monitor the force or pressure of an object, especially suitable for tension control and measurement in the industrial field.
High measurement accuracy: With high measurement accuracy, it can provide accurate force or pressure measurement results.
Various output signals: The sensor usually uses analog signal output, such as 4-20mA signal or 0-10V signal, as well as digital signal output, such as RS485 communication interface.