1.Parameters:
–Voltage: 24V1
–Current Range: Supports a wide range, up to 400A1
–Input: Current input1
2.Specifications:
–Model: T911012
–Manufacturer: ICS TRIPLEX, a brand known for its instrumentation control systems12
–Operating System: Simple to PLC system, depending on configuration24
3.Dimensions & Weight:
–Dimensions: 26x35x24mm (approximate), but note that these may vary slightly based on packaging or accessories2
–Weight: Ranges from 1.2KG to 2KG, with 1.5KG mentioned in one source
–Parameters:
–Operating Voltage: 24V DC1
–Current Rating: 100-400A (Note: This range may refer to the compatibility or capabilities of the devices it controls rather than the gateway itself)1
–Specifications:
–Type: EtherNet/IP™ to PROFINET Controller Gateway2
–Control Capability: Allows EtherNet/IP™-based controllers to control up to 36 PROFINET RT devices, including field I/O, drives, HMIs, and controllers32
–Installation: Independent DIN rail mounting32
–Dimensions & Weight:
–Weight: Approximately 2KG
–Parameters:
–Work Voltage: 220V (as per one source, but another mentions 4643V, which seems unusual and may be a typographical error)12
–Output Frequency: 350kHz (as per one source, but another mentions 346536Hz, which could be for a different model or context)12
–I/O Points: Not specified directly, but often associated with PLC modules1
–Specifications:
–Type: PLC/DCS (Programmable Logic Controller/Distributed Control System) module or card12
–Brand: Potentially associated with KUKA, but also mentioned with Fanuc and other suppliers12
–Function: Data processing, control, and communication in industrial automation systems12
2.Specifications:
–Model: PRD-P310250Z-5512
–Manufacturer: Likely associated with Kollmorgen or Servotronix, as mentioned in different sources12
–Compatibility: Supports various motion control applications13
3.Dimensions & Weight:
–Weight: Approximately 2KG
–Specifications:
–Type: EtherNet/IP™ to PROFINET Controller Gateway2
–Control Capacity: Enables control of up to 36 PROFINET RT devices, such as field I/O, drives, HMIs, and controllers2
–Installation: Independent DIN rail mountable2
–Dimensions & Weight:
–Weight: Approximately 2KG
1.Parameters & Specifications:
–Model/Code: PP845
–Material: Polypropylene (PP) in some cases12, while in others, it could refer to a specific product or module34.
–Density: 0.9g/cm³, typical for polypropylene12.
–Melt Flow Rate (MFR): 12g/10min, indicating the material’s flowability12.
–Tensile Strength: 30.9MPa, demonstrating the material’s resistance to breaking under tension12.
2.Dimensions & Weight:
–Dimensions: For polypropylene material, it is typically in granular form12. For the PP845 as a product or module, dimensions vary. For example, in one case, it’s a touch panel with dimensions of 115mm x 48mm x 150mm3, while in another, it’s part of a series with no specific dimensions mentioned5.
–Weight: For polypropylene material, weight is not applicable at the granular level. For PP845 as a product or module, weights vary, such as approximately 1.2kg for a specific touch panel3 and 2KG for another unspecified product4.
–Parameters:
–Channel Count: 32 digital input/output channels1.
–Isolation: Supported for enhanced safety1.
–Compliance: Compliant with IEC 61508 SIL 3 standard1.
–Specifications:
–Type: I/O (Input/Output) module1.
–Design: High availability and reliability, designed specifically for Triconex safety control systems1.
–Communication: Supports various communication protocols for data exchange with other devices and systems2.
–Dimensions & Weight:
–Dimensions: 300mm x 200mm x 100mm1.
–Weight: 5kg (as per one source, but another mentions 0.412kg
–Specifications:
–Type: PLC module, specifically a controller input module23.
–Functionality: Provides two Modbus/RTU master channels, allowing access to data from remote RTUs3.
–Speed: 150 MHz1.
–Dimensions & Weight:
–Dimensions: 450mm in length, but specific width and height may vary2.
–Weight: Approximately 0.2 kg1.
2.Specifications:
–Type: Controller, possibly a DCS (Distributed Control System) module or a card controller12
–Compatibility: Suitable for use in automation control systems4
–Interface: Etherner communication interface1
3.Dimensions & Weight:
–Dimensions: 10cm x 10cm x 5cm3
–Weight: 500g3, though another source mentions approximately 1.60kg
–Parameters:
–Voltage: Typically 24VDC12.
–Power Consumption: 5W12.
–Communication Speed: Up to 921Kbps12.
–Specifications:
–Compatibility: Works with various control systems, including factory automation, SCADA systems, medical, and transportation equipment12.
–Ports: Offers 4 to 32 port options12.
–Bus Speed: Achieves 66MHz bus speed through the Control Unity ASIC chip12.
–Dimensions & Weight:
–Physical Size: 324mm x 225mm x 22.5mm1.
–Weight: Approximately 0.32kg
