argument
Power supply voltage: may be 110-240V, but there may also be a 24VDC version.
Processor speed: 33MHz
Output points: 8 isolated points.
Output current range: 4~20mA.
Resolution: 12 bits.
specification
Communication protocol: Ethernet /IP.
Enclosure protection class: IP67.
Operating temperature range: -40℃~85℃.
Size and weight
Size: 40×40×30mm
Weight:
0.69 kg
2KG
3.5 kg
Voltage rating: Different voltage levels may be involved, depending on the application scenario and power requirements.
Power: May vary depending on device type and use, but no specific value is given.
Control principle: DCS (Distributed control System) or other industrial automation control technology may be used.
specification
Range: There may be different range ranges according to different measurement parameters (such as current, voltage, temperature, etc.), such as 100-230.
Accuracy: The measurement accuracy may reach 0.1-1.4, but it depends on the measurement parameters and equipment calibration.
Specification size: May be 2004050mm, but please note that this is only an example size and the actual size may vary.
Size and weight
Size: As mentioned above, the specification size is 2004050mm
Delivers unmatched CPU scan speed performance, capable of scanning 100K steps of programs in 1 millisecond.
Equipped with a standard CPU unit with 8 discrete inputs and 6 discrete outputs, it offers a combination of 4 built-in I/O types.
Communication interface:
The standard CPU unit includes two RS-232 RJ12 communication ports and one RS-485 communication port.
The rack-mounted programmable automation controller offers IEEE 802.11a/b/g Wi-Fi networking, two separate 10/100 Mbps wired Ethernet interfaces, and an RS-232 serial port.
Parameters and specifications
Processor: Usually equipped with Intel Core i7-6820HQ processor.
Memory: 16 GB DDR4 memory.
Storage: 256 GB SSD.
Redundancy: Triple redundancy (in some configurations).
I/O type: Support digital input, digital output, analog input, analog output.
Number of channels:
Some configurations may have 32 channels.
Other configurations may have 40 three-mode redundant (TMR) input channels.
Isolation voltage: 2500 Vrms.
Working temperature:
Some of the parameters mentioned in the specification range from -40°C to +70°C.
Another parameter range is mentioned as -20℃~+70℃.
Communication interface: Support Ethernet, Profibus, Modbus and other communication protocols.
Size and weight
Dimensions: Usually 220 mm x 176 mm x 89 mm.
Weight: Shipping weight is 2 kg
Communication protocols: Support a variety of communication protocols, such as Modbus TCP, Ethernet/IP, PROFINET, etc., in order to exchange data and communicate with other devices.
Communication rate: Supports different communication rates to adapt to different data transmission requirements.
Data exchange: Support real-time data exchange and synchronization, so that different control devices can share data.
specification
Interface type: Usually equipped with standard RJ45 Ethernet interface and RS232/485 serial port, to ensure compatible connection with various PLC devices.
Microprocessor: A high-performance microprocessor such as Intel 386EX May be used (for F8628X or other HIMA products, but specific information on F8627X is not clear).
Security: Security mechanisms may be supported to protect the confidentiality and integrity of communication data.
Size and weight
Dimensions: For the F8628X module, the dimensions are 3 height units (HU), which is 44.45 mm, and 4 width units (WU), which is 20.32 mm (4 5.08 mm).
Communication protocol: Support for MODBUS serial /ASCII communication protocol, which is a widely used industrial automation communication standard.
Serial port:
Dual RS232 serial application port with support for RS232/RS485 and RS422 electrical standards.
The baud rate can be configured from 110 baud to 115.2 kbps.
Acceptable serial Settings include none, odd or even parity, data bits 5, 6, 7 and 8, stop bits 1 or 2, and RTS on/off delay of 0-65535 ms.
Ethernet Port: A debugging/configuration port in the form of an RJ45 Ethernet port, supporting 10/100 base-T transfer speeds, with link and active LED indicators and automatic cross-cable detection.
Installation: The MVI56E-MCMR is a single slot module that can be installed directly into any 1756 chassis.
Configuration tools: Use ProSoft Configuration Builder(PCB) and Product Discovery Service (PDS) to configure module operations and parameters.
