Parameters and specifications
Voltage: Depending on the search results, the SPNPM22 voltage may have different specifications, such as DC20-50V, or the operating voltage is 24Vdc/120Vac, and there is information indicating a voltage of 24V. The voltage depends on the product model and application scenario.
Current: It is stated that the current range is 100-400A, but please note that this may need to be confirmed in conjunction with the specific product specification sheet.
Communication protocol: Support RS-485 bus, and adopt the standard MODBUS-RTU protocol, up to 200 devices can be mounted.
Output frequency: In a given situation, the output frequency may be 73 (but this may depend on the specific application scenario or configuration).
Series: A family of industrial automation control systems that may belong to GE, such as the Mark IV or RX7i PACSystem
Operating voltage: The standard operating voltage may include 24V DC, etc., but the specific value may vary by application
Rated current: The specific rated current value is not directly given, but is usually related to the design of the module and the application scenario
Operating temperature: Depending on the search results, the operating temperature may range from -35°C to 65°C
Communication interface: Supports Ethernet communication, has two Ethernet ports, can transmit data at 10/100 Mbps speed, and supports a variety of communication protocols, such as TCP/IP, MODBUS TCP, etc
Other interfaces: Includes a serial communication port that supports transfer speeds of 1200-115200 bps
Parameters and specifications
Model: CS513 3BSE000435R1
Communication protocols: PROFIBUS DP, MODBUS RTU and ASCII are supported. PROFIBUS DP has a maximum data rate of 12 Mbps, while MODBUS RTU and ASCII have a maximum data rate of 115.2 kbps.
Communication mode: including Ethernet, serial communication interface (such as RS-232, RS-485) and a variety of industrial communication protocols.
Communication rate: Ethernet communication rate is 10/100Mbps.
Safety level: SIL 3.
Operating temperature: Depending on the source, it may vary, but generally in the range of -40 ° C to +70 ° C.
Voltage: There is talk of 24V, but please note that the specific voltage may vary by application.
Current: There is talk of 100-400A, but again, this needs to be determined according to the specific application scenario.
Size and weight
Dimensions: 225mm x 140mm x 70mm (according to a newer source).
Weight: about 2kg.
There are also references to 24Vdc/120Vac, but may refer to different applications or configurations.
Maximum current:
12A (according to some descriptions)
There are other accounts that mention 100-400A, but this may be an error or confusing information, as this does not match the other descriptions of 1TGE120028R0010.
Communication interface: RS232/RS485/CAN bus network function (CAN bus is an option)
Other specifications:
The upper computer is set up to operate and control the drive through the I/O port
Parameters and specifications
Control power supply: rated 24-60 VDC, 20-48 VAC@ 48-62 Hz.
Analog output: Provides 4-20 mah analog output.
Communication ports: Three separate ports are available, including an RS232 port (for programming setup, firmware upgrade, and local control), a computer RS485 port (which can be connected to a PLC, DCS, or PC-based user), and a secondary port, RS458 (for simultaneous query or redundancy from another PLC, DCS, or PC software).
Size and weight
Package size: When shipped, the relay package is 12 inches wide, 11 inches high, and 10 inches deep.
Weight: The weight given by different sources varies and may vary depending on packaging and accessories. Some data show that the weight is about 1.2kg, and some data mention that the weight is 3.76kg.
Power consumption: Maximum 8.5W per non-fault-tolerant module
Operating temperature: 0 to +60 degrees Celsius (+32 to +140 degrees Fahrenheit)
Configuration: Single-processor module, fault-tolerant by two processor modules, the substrate integrated into an interconnect fault-tolerant connector
Processor: Possible Microprocessor based AMD Elan 520 100MHz, I/O processor CommControl™ ASIC
Size and weight
Dimensions: Length 14.7cm x width 5.15cm x height 11.4cm
Weight: 0.6 kg (product itself), shipping weight 1.5 kg
Communication interface: Support Ethernet, serial port, Modbus and other common communication protocols and interfaces
System support: Can be used with other DCS system components
Operating temperature: -40°C to +70°C (the operating temperature range of the TRICONEX 3009 series can be used as a reference)
Input voltage: It may vary depending on the model and configuration, but the standard voltage range is generally applicable to industrial automation and process control systems
