Power supply specification: Rated voltage is 18~36V DC, power is 12 watts
Operating temperature: between 0 and 65 degrees Celsius
Communication interface: Contains multiple female jack connectors, one USB port, and supports Ethernet connection
specification
Design: Individual boxed assembly, front panel allowing connection communication, rear edge with two screw mounting, three side grille openings allowing air flow, designed for base mounting in cabinet
Cooling method: Natural cooling, no fan required
Application level: complies with NFPA Class 1 zone 2 specifications
Memory: 64 MB, of which 51.389 MB is available for applications and 4 MB flash memory for firmware storage
Power supply: 24 volts DC (19.2 volts -30 volts DC)
Power consumption: At +24 V, the power consumption is 210/360 mA and the power dissipation is up to 8.6 watts
specification
Communication interface: Has two RJ45 Ethernet ports and two RJ45 serial ports, one serial port with modem control signal, the other is isolated, mainly used to connect configuration tools
Support for CPU redundancy: including CPU, CEX-Bus, communication interface, and S800 I/O for higher availability
Interface extension: Has a CompactFlash interface and other possible expansion slots for adding more functional modules
Size and weight
Size:
Dimensions for independent use: width 130mm, height 130mm, depth 190mm (insert depth <250mm after all cables are connected)
19-inch rack mounting dimensions: Front panel 3 height units (U), 21 width units (HP), total width <26 width units (HP), including heat sink insertion depth <250mm
argument
Voltage: 24VDC (input voltage)
Current: May vary depending on the application, but generally has a wide current range
Operating voltage: +5V DC, ±10%, maximum 200mA
Temperature range: +0°C to +60°C
Humidity: Maximum relative humidity up to 95% (non-condensing)
specification
Input/Output (I/O) : Typically has 8 inputs and 6 outputs, but the I/O configuration is very flexible and can be scaled up to 142 I/O points
Program storage: Flash EPROM program memory that supports 8K steps
Data storage: 8K word data storage, can store a large number of program data and configuration information
Size and weight
Size: Different sources give different size information. One way to say it is 100 mm x 70 mm x 30 mm, another way is 250 x 190 x 180mm³. This may be due to differences between different models or versions.
Weight: Depending on the source, the weight may be 0.5 kg or 2KG.
argument
Component number: IS420UCSBH4A
Manufacturer: General Electric (GE)
Country of Manufacture: USA
Microprocessor: 600MHz Intel processor with 1066MHz Intel EP80579 microprocessor for gas turbine control system
Memory: 256 MB DDR2 SDRAM
Operating system: QNX Neutrino, a real-time multitasking operating system developed specifically for industrial applications that require high speed and reliability
specification
Series: Mark VIe series
Function: UCSB controller
Communication interface: On-board IONet (Industrial Ethernet) interface to support connection and communication with other devices and systems
Input/output channels: Multiple input and output channels are capable of monitoring multiple process variables and performing related actions
argument
Speed control function: used to control the speed of DC motor, to achieve accurate operation control.
Communication interface: May have Ethernet, RS485, USB and other communication interfaces, support a variety of communication protocols, easy to integrate with the existing system.
Power input: Redundant wide voltage (12~48V DC) input, typical operating voltage is 12V/24V/48V, full load power consumption is less than 7W.
specification
Structure: modular structure.
Input/Output: has 8 digital inputs and 6 digital outputs, as well as 4 analog inputs.
argument
Component number: IS420UCSBH4A
Manufacturer: General Electric (GE)
Country of Manufacture: USA
Microprocessor: 600MHz Intel processor with 1066MHz Intel EP80579 microprocessor for gas turbine control system
Memory: 256 MB DDR2 SDRAM
Operating system: QNX Neutrino, a real-time multitasking operating system developed specifically for industrial applications that require high speed and reliability
specification
Series: Mark VIe series
Function: UCSB controller
Communication interface: On-board IONet (Industrial Ethernet) interface to support connection and communication with other devices and systems
Input/output channels: Multiple input and output channels are capable of monitoring multiple process variables and performing related actions
argument
Processor architecture: Pentium M microprocessor
Main frequency: 1.6GHz (some data mention 1.8MHz, but it may be a clerical error, because MHz and GHz are far different)
User memory: 64 MB
User flash: 64 MB
Rated voltage: Multiple voltage ranges, including 5V, 12V, 24V and -24V DC
Load requirements: 8.5 amps at 6V DC, 12.12 amps at 0V DC and -0.03V DC (6.8 amps at 5V DC, 0.003 amps at 12V and -12V DC, according to another source)
specification
Series: RX7i PACSystem (Some sources mention RX3i PACSystem, but this may be early information)
Communication interface: Ethernet, serial communication (including RS-232 and RS-485)
Rack backplane design: supports the VME64 standard format
Firmware upgrade port: Three separate and isolated serial ports, two of which are used to upgrade firmware or create serial interfaces with external devices, and the third is a station management port for Ethernet interfaces
