Showing 16933–16944 of 24490 results
¥ 4,263.00
1.Parameters :
Input Voltage: Typically 12VDC (though some sources mention 24VDC input)1 2
Output Voltage: Depending on the configuration, it can output 10VDC or 0-20mA1 3
Maximum Output Current: 2A1
2.Specifications :
Designed for industrial automation, aerospace, marine, and military applications1 2
Wide operating temperature range: -40°C to 85°C1 2
Compliant with MIL-STD-202G, EN61326-1, EN61000-6-2, and UL 508 standards1 2
3.Dimensions & Weight :
Dimensions: 2.0″ x 2.0″ x 0.5″ (50.8mm x 50.8mm x 12.7mm)1 2
Weight: 0.1 lbs (approx. 45.4g)1 2
¥ 5,362.00
Dimensions and Weight : Dimensions and exact weight may vary, but typical industrial controllers are compact and lightweight.
Features :
High-performance control algorithm for stable and fast response.
High reliability with quality components and rigorous manufacturing processes.
Easy integration with multiple communication protocols and interfaces.
Rich functionality including logic, motion, and process control.
User-friendly interface for efficient parameter setting, monitoring, and debugging.
¥ 6,205.00
1.Parameters :
Counter/Timer Channels: 8, 32-bit
Digital I/O Lines: 40, TTL/CMOS compatible
Maximum Source Frequency: 100 MHz
External Source Frequency: 80 MHz
DMA Channels: 3 for high-speed data transfers
2.Specifications :
Bus Interface: PCI Express
Logic Levels: 5V TTL
Software Support: NI-DAQmx driver software
Timing Chip: X Series NI-STC3 for advanced triggering and synchronization
3.Dimensions & Weight :
Exact dimensions and weight are not explicitly mentioned in the search results.
However, as a PCIe device, it is designed to fit standard PCIe slots and should be lightweight for easy installation.
¥ 6,320.00
Series : GE Fanuc RX3i PACSystems
Dimensions : Not specified, but typical industrial modules are compact
Weight : Not specified, varies based on manufacturer and packaging
Features :
8 independent and isolated serial ports
Configurable as Modbus Master/Slave, CCM Slave, DNP3 Master/Slave
RS-232, RS-485, RS-422 serial communication
Full/half-duplex operation
Fault status reporting, port-to-backplane isolation
¥ 6,235.00
1.Parameters :
Model: 9907-018 2301A
Input Channels: 8 analog input channels
Output Channels: 4 analog output channels
Input Voltage Range: ±10VDC
Output Voltage Range: ±10VDC
Input Impedance: 250Ω, 500Ω, 1200Ω, 2500Ω
Accuracy: ±0.10% F.S.
Response Time: 200ms
Operating Temperature Range: -40°C to +70°C
2.Specifications :
Controller Type: Digital speed controller
Compatible with Woodward SPM-A synchronizer for automatic generator load control
Process input/output control and automatic power transfer and load control
¥ 6,235.00
Series : S800 series processor module
Dimensions : 12x12x12 (approximate, may vary)
Weight : Not specified, but typical industrial modules are lightweight
Voltage : 220V
Current : 5A
Resistance : 5Ω
Features :
High-precision control
Multiple control modes (position, speed, torque)
Real-time monitoring of servo motor status
Rich communication interfaces (Modbus RTU, Modbus TCP/IP, etc.)
¥ 4,251.00
Parameters : Input voltage range of 12-48VDC, output voltage of 5VDC, maximum output current of 10A, and efficiency greater than 90%.
Specifications : Designed for industrial automation applications, with a 32-bit RISC processor.
Dimensions : 170mm x 105mm x 32mm.
Weight : Approximately 120g to 0.82kg, depending on sources.
Series : Part of the FOXBORO FBM201 series.
¥ 6,235.00
1.Parameters :
Sensing Range: 190-350 nanometers of the ultraviolet spectrum1
Sensitivity: High, capable of detecting small flames1
Input Signal: 4-20mA analog input signal and red digital pulse input signal1
2.Specifications :
Designed for real-time, fast response to flame signals2
Suitable for detecting flames from alkyl, olefins, alkanes, and other combustible gases2
High temperature stability and reliability for long-term stable operation1
3.Dimensions & Weight :
Size: 119mm x 89mm x 70mm (as mentioned in one source)1
Weight: Approximately 1kg (estimated based on typical industrial scanner weights; exact weight may vary)3
Note: Another source mentions 56*89mm for dimensions, which could be a typographical error or a specific variant. Always refer to official documentation3
¥ 4,695.00
Parameters : Voltage: 24V, Current range: 100-400A1
Specifications : Designed for use in B&R industrial automation systems, offering reliable performance1
Dimensions : Exact dimensions may vary, but typical industrial modules are compact for easy installation
Weight : Approximately 2KG1
Series : Part of B&R’s 2005 series interface modules1
Features :
Equipped with communication interfaces such as RS485, enabling data exchange and communication with other devices^^
Electrical isolation for enhanced safety and reliability^^
Supports Profibus DP protocol, facilitating integration into various automation networks^^
¥ 6,532.00
1.Parameters :
Brand: Honeywell
Model: TC-RPFM01
Voltage: 24V (mentioned in context with other products)1
Work Voltage: 455V (specific to TC-RPFM01)1
Output Frequency: 532 kHz1
2.Specifications :
Designed for use in industrial automation and control systems1
Part of Honeywell’s DCS or automation module range2 3
Provides advanced control and monitoring capabilities1
¥ 6,235.00
–Series : FOXBORO P09XX Series
–Parameters :
Voltage: Depending on the model, it can operate with a wide range of DC or AC voltages suitable for industrial applications.
Current: Designed to handle significant current loads, ensuring reliable power supply and control.
–Specifications :
High availability with redundant path control servers1
Configurable for various automation tasks, including process control and monitoring2
Advanced diagnostics and monitoring capabilities1
¥ 6,352.00
1.Parameters :
Communication Protocol: PROFIBUS DP V1
Supported Services: Class 1 and Class 2 DPV1
Processor and Memory: High-performance processor and memory for fast data calculation and processing
2.Specifications :
Compatible with ControlLogix processors from Rockwell Automation1
Uses proprietary backplane technology for robust data exchange1
Supports up to 125 slave devices via PROFIBUS network1 2
Maximum 1536 input and 1536 output data bytes per cycle1
3.Dimensions & Weight :
Dimensions: 320mm x 240mm x 150mm3 4
Weight: Approximately 1.2kg3 4
