Parameters and specifications
Processor: Usually equipped with Intel Core i7-6820HQ processor.
Memory: 16 GB DDR4 memory.
Storage: 256 GB SSD.
Redundancy: Triple redundancy (in some configurations).
I/O type: Support digital input, digital output, analog input, analog output.
Number of channels:
Some configurations may have 32 channels.
Other configurations may have 40 three-mode redundant (TMR) input channels.
Isolation voltage: 2500 Vrms.
Working temperature:
Some of the parameters mentioned in the specification range from -40°C to +70°C.
Another parameter range is mentioned as -20℃~+70℃.
Communication interface: Support Ethernet, Profibus, Modbus and other communication protocols.
Size and weight
Dimensions: Usually 220 mm x 176 mm x 89 mm.
Weight: Shipping weight is 2 kg
Communication protocols: Support a variety of communication protocols, such as Modbus TCP, Ethernet/IP, PROFINET, etc., in order to exchange data and communicate with other devices.
Communication rate: Supports different communication rates to adapt to different data transmission requirements.
Data exchange: Support real-time data exchange and synchronization, so that different control devices can share data.
specification
Interface type: Usually equipped with standard RJ45 Ethernet interface and RS232/485 serial port, to ensure compatible connection with various PLC devices.
Microprocessor: A high-performance microprocessor such as Intel 386EX May be used (for F8628X or other HIMA products, but specific information on F8627X is not clear).
Security: Security mechanisms may be supported to protect the confidentiality and integrity of communication data.
Size and weight
Dimensions: For the F8628X module, the dimensions are 3 height units (HU), which is 44.45 mm, and 4 width units (WU), which is 20.32 mm (4 5.08 mm).
Communication protocol: Support for MODBUS serial /ASCII communication protocol, which is a widely used industrial automation communication standard.
Serial port:
Dual RS232 serial application port with support for RS232/RS485 and RS422 electrical standards.
The baud rate can be configured from 110 baud to 115.2 kbps.
Acceptable serial Settings include none, odd or even parity, data bits 5, 6, 7 and 8, stop bits 1 or 2, and RTS on/off delay of 0-65535 ms.
Ethernet Port: A debugging/configuration port in the form of an RJ45 Ethernet port, supporting 10/100 base-T transfer speeds, with link and active LED indicators and automatic cross-cable detection.
Installation: The MVI56E-MCMR is a single slot module that can be installed directly into any 1756 chassis.
Configuration tools: Use ProSoft Configuration Builder(PCB) and Product Discovery Service (PDS) to configure module operations and parameters.
Security: SIL3 certification ensures a high level of security integrity.
Computing power: Equipped with a high-performance CPU, it can quickly process large amounts of data and complex algorithms.
Configuration and management: Easy to flexibly configure according to the configuration security manual, and provides rich diagnostic and maintenance functions.
Compatibility: Works with other components such as ABB’s PM865 for seamless integration and supports multiple communication protocols and interfaces.
Flow range: Although this is usually associated with flowmeters, it may refer here to a certain range or sensitivity for vibration monitoring, but the specific parameters are not directly given.
Accuracy: High precision shaft vibration measurement, possible to achieve ±1% accuracy.
Temperature range: -40°C to 150°C.
Power Supply: 100-240VAC, 50/60Hz.
Output: 4-20mA, RS485 Modbus, relay.
Display: 2×16 LCD.
Ultrasonic frequency: 1MHz or 500KHz (this may refer to a specific model of ultrasonic flowmeter, not a shaft vibration monitor).
Size: For shaft vibration monitors, the size may vary depending on the specific model, but a universal measuring card may have a specific size, such as 263337mm (possibly referring to module size).
Type: High performance sensors, especially force sensors.
Measurement range: Depending on the use, such as when used in steel mills or power plants, the measurement range may be 0-500 (the unit is not clear, may be pressure, force, etc.).
Voltage: 24V.
Current: 100-400A (Note: current parameters may be less common for sensors, which may be related to specific application scenarios or supporting devices).
Communication protocol: Support Modicon S908 RIO fieldbus protocol, communication rate up to 1.544Mbps.
Network topology: supports point-to-point communication, chain network, star network, redundant double network and self-healing protection of fiber ring network.
specification
Interface: Supports one or two Profibus DP electrical ports and one or two 155M optical fiber ports, supporting redundant dual-network optical fiber ring network topology.
Power supply: DC9-36V wide redundant dual power supply, DC1500V power isolation, reverse protection.
Operation Mode: The A6210 monitor operates in three different modes: thrust position, differential expansion (differential expansion) or rod position.
Measurement accuracy: In thrust position mode, the thrust position can be accurately monitored and reliable mechanical protection is provided by comparison with the alarm setting point (drive alarm and relay output).
Response time: Shaft thrust monitoring should detect sudden and small axial movement in 40 milliseconds or less.
specification
Number of channels: Dual channels.
Module size: 3U size, single slot plug.
Interface and communication: Support analog communication, may include front and rear buffer and proportional output, 0/4-20 mA output, 0-10 V output.
Compliance: Compliant with API 670 and API 618 standards.
Size and weight
Size: May vary depending on the specific model or manufacturer, but based on experience with similar products, its size should be moderate and easy to install and maintain. For example, some versions of the A6210 monitor module measure 170mm x 105mm x 32mm.
Processor capability: Equipped with a high-performance processor with fast data processing and decision making capabilities
Multitasking: The ability to perform multiple tasks simultaneously, including data acquisition, control logic execution, communication, etc
Communication interface: Supports a variety of communication interfaces, such as Modbus RTU, Modbus TCP/IP, etc., in order to efficiently exchange data with other control devices
Programmability: Programmable, allowing users to write and load custom control logic and programs according to specific application requirements
Data storage: With data storage function, historical data can be recorded for analysis and reporting
Size and weight
Size: The exact size may vary from model to model or version, but typically industrial-grade processor modules are designed in a compact form to accommodate different installation environments. For example, some ABB industrial products may have a similar form factor of 140mm × 90mm × 70mm, but the exact size of the PM825 may be different.
