argument
Input voltage: 100-240V AC, 50/60Hz
Output voltage: 24V DC
Output current: 6.3A
Efficiency: 91%
Power factor: 0.98
Operating temperature: -25℃~+70℃
specification
Dimensions: 125mm x 125mm x 110mm
Weight: 1.3 kg
Protection type: IP20
Certification: CE, RoHS, UL, cUL
Parameters and specifications
Flow range: 0-10 m/s (in some contexts, this may refer to the A6500-UM as a parameter for ultrasonic flowmeters)
Pipe size: 1/2 “- 240” (again, this may be for flow measurement applications)
Accuracy: +/- 1% (accuracy of flow measurement)
Temperature range: -40°C to 150°C
Power Supply: 100-240VAC, 50/60Hz
Output: 4-20mA, RS485 Modbus, relay
Display: 2×16 LCD
Ultrasonic frequency: 1MHz or 500KHz (for flow measurement)
Measurement period: 1 second (default)
Protection Class: IP67 (sensor), IP65 (transmitter)
Communication protocols: Modbus RTU, M-Bus, BACnet, LonWorks, Profibus DP
argument
Resolution: The resolution of the A404K may vary depending on the reference. One says it’s 16 MP (that’s 16 megapixels), another says it’s 2352 x 1726 pixels.
Frame rate: Up to 96 fps (frames per second), and some say up to 75 frames per second.
Exposure time: 0.05μs to 170ms.
Pixel depth: 8 bit /12 bit /14 bit.
specification
Sensor: 1/1.4 “CMOS sensor.
Pixel size: 7.0μm x 7.0μm.
Interface type: Gigabit Ethernet or Camera Link.
Power Supply: 12 VDC.
Size and weight
Size: According to the citation, there are two different sizes. One version is 29 x 29 x 41 mm, another is 44 x 44 x 29 mm.
Weight: About 100 g or 0.45kg
argument
Input voltage: 24VDC (otherwise stated as 85-264V AC, 47-63 Hz or 110-370V DC)
Output voltage: 24V DC
Output power: 450 W
Maximum output current: According to some accounts, the current range may reach 100-400A
Speed Response frequency: 1MS
Operating temperature range: -40°C to +70°C
specification
Product brand/Model: ABB UAA326A04 HIEE300024R4 controller PLC module
Operating voltage standard: V
Output frequency standard: kHz
dimension
Product size: 166mm x 112mm x 36mm
Weight: 1.3 kg
argument
Voltage: The specific voltage value may vary depending on the application scenario, but is usually used to provide a stable DC power supply.
Current: The specific current value also depends on the application scenario, but the module has an efficient power conversion capability to meet the power needs of the system.
specification
Functions: Provide stable DC output, with efficient power conversion capabilities, and a variety of protection functions (such as overload protection, short circuit protection, overvoltage protection).
Communication interface: Some models may be equipped with communication interfaces, such as Ethernet interfaces, serial interfaces, etc., to achieve data communication and remote monitoring with other devices or control systems.
Number of leds: 17 leds, one of which is used to indicate the status, the others are driven by software and hardware.
Number of jumpers: 12, 3-pin rows.
Number of voltage outputs: Four buffered analog outputs.
argument
Output current range: 4-20 mA output (+ 6% overrange)
Output accuracy: %3C0.25% (in the range of 4-20 mA) FSR (0-21.2 mA), from 32 to 140 degrees Fahrenheit (0 to 60 degrees Celsius)
Resolution: 12 bits
Out of range protection: + 42.5VDC, continuous
Switch time for branch failure: %3C 10 ms, typical value
specification
Product type: Analog output module
Type: TMR (Triple Module Fault Tolerance)
Output points: 8
Support system: PLC/DCS system
Function: For access to HART (Highway Addressable Remote Transducer) equipment, with the function of a safety controller, to achieve the safety concept according to IEC 62443 standards
dimension
Dimensions (H x W x D) : approximately 4.4 cm x 16.9 cm x 22 cm
Net depth/length: 135 mm
weight
Weight: 4 kg
argument
Voltage:
Operating voltage: Multiple voltage inputs may be supported, but specific values such as 24V DC are mentioned in search results.
Current:
Working current: ≤35mA (under 12V DC power supply condition).
The current values mentioned in the other version (such as 20A) may be applicable to other scenarios or modules, but are not directly mentioned in this particular model.
Resolution:
Temperature: 0.1℃.
Humidity: 0.1%RH.
Measuring range:
Humidity: 0~100%RH.
Temperature: -40~80℃.
Output signal: 4~20mA DC.