Measurement range: May vary according to the specific model, but is usually used to measure displacement or vibration, such as axial and radial axis displacement, shaft eccentricity, shaft vibration, etc.
Measurement accuracy: related to the connected preprocessor CON021, the exact accuracy may vary depending on the sensor model and measurement conditions.
Output signal: A voltage signal is usually provided that is proportional to the measured physical quantity.
CON021 preprocessor
Protection level: IP20.
Output voltage: linear range -4V to -20V (supply voltage is -24V), maximum range -1V to -22V, specific output voltages (e.g. -12V) may be used for measurement ranges with symmetrical ends.
argument
Processor: 32-bit RISC processor up to 200 MHz.
I/O points: up to 256 points.
Communication interface: Support RS232, RS485, Ethernet and other interfaces.
Power supply voltage: 24V DC (Another source mentions an input voltage of -0.6V DC, which may be an application-specific or configuration voltage rather than a standard power supply voltage).
Power consumption: 20W.
Output current: Max. 10A.
Efficiency: greater than 90%.
specification
Operating temperature: -25°C to +70°C (some sources mention -20°C to +50°C, which may be the operating temperature range under specific conditions).
Storage temperature: -40°C to +85°C.
Protection grade: IP67, indicating that it has good dust and water resistance.
argument
Processor: GE Fanuc PACSystems RX3i series of 1 GHz central processing unit, using Intel Celeron-M microprocessor.
User memory: 20 MB (also known as random access memory or RAM).
Flash memory: 20 MB.
I/O operations: Capable of up to 32K I/O operations per second.
Block support: Up to 512 blocks are supported, with a maximum size of 128 KB for each block.
specification
Communication interface: two front ports, one RS-485 serial port and one RS-232 serial port.
Supported protocols: SNP, Serial I/O, Modbus Slave and master serial protocols.
Power requirements: At 5 volts DC, the rated current consumption of the module is 1.2 amps; At 3.3 volts DC, it’s 1 amp.
argument
Operating voltage: Standard V (the specific value may vary according to different application scenarios).
Output frequency: standard kHz (the specific value may vary according to different application scenarios).
Rated voltage: In some cases, it may be 120V AC.
specification
Model: 369B1860G0030.
Type: Programmable processor board module, may be used in industrial control equipment.
dimension
Size: The exact size may vary from batch to batch or manufacturer. However, according to some information, it may have a size similar to 10.3cm×12.3cm×10.3cm, but please note that this is not directly for the specific size of 369B1860G0030.
Parameters and specifications
Communication protocol: Profibus DP, DP-V1.
Communication rate: Supports a variety of communication rates, including 9.6kBit/s, 19.2 kBit/s, 45.45kBit/s, 93.75kBit/s, 187.5kBit/s, 500kBit/s, 1.5MBit/s, 6MBit/s, and 12MBit/s.
Power supply: Dual power supply redundant input, DC(9-36)V, typical DC24V, power consumption less than 4W, with DC1500V voltage isolation and reverse protection function. It is also said that the power supply is 5V DC, but this information may be related to the specific model or application environment.
Lightning protection, overcurrent and surge protection: with 4000V lightning protection and 1.5A overcurrent protection and 600W surge protection.
argument
Number of channels: Typically has 8 differential inputs
Voltage range: +/-10V
Resolution: 16 bits
Maximum update rate: 10ms
Power Supply: +5V DC, Max 100 mA
Backplane current load: 650 mA@5V DC
Operating temperature: 0°C to 60°C (32°F to 140°F)
Storage temperature: -40°C to 85°C (-40°F to 185°F)
Humidity range: 5-95%RH, non-condensing
argument
Voltage: 24V
Current: 100-400A
Features:
The terminal is under test and the function is blocking the HMI input signal
Three-phase trip signal output, used to command trigger the circuit breaker or send a signal
In automatic recovery system, the circuit breaker trips when the three-phase voltage is lost for a long time
The voltage measuring element continuously measures three voltages to ground, filters and compares them
specification
Weight: 2KG
Packing: good
Delivery time: Stock
Logistics: SF Express
Minimum package number: 1
argument
Input/Output capability: The module features 32 software-configurable multipurpose solid-state channels that support analog and digital input/output (AI, AO, DI, and DO), as well as a 2 – or 3-wire resistance temperature detector (RTD).
Communication port: Has a communication port and is insulated from other module circuits.
Safety features: Short-circuit protected I/O loop power output and fail-safe activation of output in case of communication interruption.
Self-diagnosis: Built-in testing for self-diagnosis and fault identification.
Compliance: SIL 1 compliant with line fault detection (LFD) and ground fault detection (EFD).
