Size: 89mm x 45mm x 110mm
Installation: DIN rail installation for easy installation in the control cabinet
Outputs: There are 16 outputs, each of which is a normally open (NO) relay contact, rated 5A at 250V AC or 30V DC
Input signals: Designed to handle a variety of input signals, including 24V DC, 120V AC and 240V AC
Power supply: Not directly mentioned, but commonly used in industrial automation and control systems
Function: SDSS-PIN-51-COAT is a control board or governor board from ABB that may be used for tension control or other industrial automation applications.
Common faults include: no display, no phase, over current, over voltage, under voltage, overheat, overload, grounding, parameter error, display no output, module damage, error report, etc
Sdss-pin-51-coat may be used for tension control or other control tasks in industrial automation control systems, such as wires, cables and other situations where tension accuracy is not required
Model: DSQC668 3HAC029157-001
Voltage: 24V
Current: 100-400A
Output frequency: 50HZ
Country of Origin: Malaysia (MY)
Net weight: 0.58kg
Net length: 269mm
Product height: 27 mm
Product net width: 147 mm
Power supply: Provides +5 VDC, +12 VDC, and -12 VDC power supplies, as well as logical level sequence signals
Power output: One AC input line cycle may be lost, but the output power is not actually lost
Protection: Overcurrent, overheat and overvoltage fault conditions are protected
Operating temperature: 0 to 60°C (no forced air cooling)
Output power: Allows 100 watts of total output power
Output voltage: +5 VDC output up to 20 amps, +12 VDC output up to 2 amps, -12 VDC output up to 1 amp
Measuring range: × 1 (0-1999 W/m2); × 10 (2000 – 19990 w / m2, display value multiplied by 10)
CPU type: Intel Celeron (Pentium III) microprocessor
Memory: 10 MB RAM
Flash memory: 10 MB
Serial ports: RS-232 and RS-485
Communication protocols: Support Modbus RTU Slave, SNP, and Serial I/O protocols
Block support: Up to 512 blocks, each block with a maximum size of 128 KB
Programming language: ladder diagram, structured text, functional block diagram or C language
Technical specifications: 1.25 amp rated current at 3.3 volts DC, 1 amp running at 5 volts DC
Operating temperature range: 0 to 60 degrees Celsius
Input voltage range: 12-48VDC
Output voltage range: 5VDC
Output current: Max. 10A
Accuracy: ±0.1%FS
Resolution: 12 bits or 100
Response time: <250 ms
Efficiency: greater than 90%1.
Operating temperature: -20°C to +50°C or -40°C to 85°C
Storage temperature: -40°C to +70°C1.
Ambient humidity: 5% to 95% relative humidity (no condensation)
Brand: ABB
Model: ACS510-01-060A-4
Power: 30kW
Rated current: 60A
Input voltage: three-phase AC380V~480V (frequency: 50/60Hz)
Supply voltage: Low voltage
Control mode: voltage vector output
Voltage regulation mode: PAM control
Protection level: IP21
Input voltage: 24VDC
Output voltage: 24VDC
Output points: 8 isolated points
Operating temperature range: -40℃~ 85 ℃
Output current range: 4~ 20mA
Resolution: 12 bits
Output accuracy: less than 0.25%
Communication protocol: Ethernet /IP
Number of pixels: The total number of pixels reached 1,070,000
Resolution: 960×720 resolution in 4:3 mode and 1152×648 resolution in 16:9 mode
Electronic shutter speed: 768×494 in NTSC mode and 752×582 in PAL mode
Zoom function: 12x optical zoom and 48x digital zoom function
Focal length range: f-3.6 to f2.8
Minimum illumination: 7lx at F1.6
SNR: up to 50Db
Interfaces: include VBS(BNC), Y/C(4-core Mini DIN), and RS-232(VISCA protocol) and RS422(VISCA protocol)
Series: The IC697CPU771 is part of the General Electric Fanuc 90-70 series
Input/Output: Has 2K input and output (any combination), and up to 8K analog I/O
Programming software: Support MS-DOS or Windows-based programming software for programming and configuration
Memory support: Up to 512 Kbytes of battery backup extended memory is supported in the same slot
Operating voltage: 210V
Processing speed: 6us
Output frequency: 2.5Hz
Size: 31.3cm×29.2cm×9.20cm
Weight: 2.2kg
Number of channels:
Analog input: 16 channels
Analog output: 2 channels
Digital I/O lines: 24 (8 of which are 1 MHz hardware timing lines)
Counter/timer: 4-channel 32-bit
Sample rate:
Analog input: 250 kS/s
Analog output: 900 kS/s
Type: HART analog input module
Number of channels: 16 channels are supported, including 12 single-ended channels and 4 differential channel3
Input signal type: analog signal
Input range:
Current signal: 0-20 mA, 4-20 mA
Voltage signal: 1-5 VDC, 0-5 VDC
Input impedance: 250Ω, 500Ω, 1200Ω, 2500Ω
Accuracy: +/-0.10% F.S.@ 25°C
Linearity: +/-0.05% F.S.
Response time: 200 ms