Parameters and specifications
Communication interface: RS-485
Communication rate: 9600bps
Voltage: 24V
Operating temperature range: 0°C~55°C
Size and weight
Size: 120mm×80mm×40mm
Weight: About 0.5kg
series
The IC695NIU001 module is part of the AB 1769 series under the ALLEN-BRADLEY brand from Rockwell Automation. The series is a series of compact programmable automation controllers and modules designed for small and medium-sized industrial automation control systems.
Parameters and specifications
I/O points: Can be configured to handle any combination of discrete I/O and analog I/O, with a maximum number of 1024 discrete input, 1024 discrete output, 64 analog input words, and 64 analog output words.
Communication interface: Has a 15-pin RS-422/485 compatible serial port and a 9-pin IC66 handheld monitor port. Dedicated IC66 bus terminals that support redundancy.
Compatibility: Compatible with handheld monitors version 4.0 or later, directory number IC660HHM501G; CPU firmware version 2.0 or higher, MS-DOS programming software version 3.0 or higher, bus controller version 3.0 or higher if used with IC697 PLC module.
Size and weight
Size: According to the search results, the IC697BEM733 measures approximately 170mm x 105mm x 32mm.
Weight: About 120g.
Parameters and specifications
Processor speed: 300 MHz
Memory: 10 MB RAM and 10 MB flash
Microprocessor: Intel Celeron (Pentium III)
Block support: Up to 512 blocks are supported, with a maximum size of 128 KB for each block
Programming language: Support ladder diagram, structured text, function block diagram and C language
Execution speed: Typical execution speed is 0.195 ms /1000 Boolean instructions
Internal clock: With an internal daytime clock with a maximum deviation of 2 seconds per day and an internal timing accuracy of up to 0.01%
argument
Transmission speed: Support 153.6kbaud transmission speed, the standard configuration includes 153.6kbaud, 76.8Kbaud and 38.4Kbaud.
I/O module support: Each rack supports a maximum of eight I/O modules, a maximum of eight racks, and a total of 64 I/O modules.
Storage capacity: discrete input and output can accommodate up to 1024 points; Analog input and output memory are 128 bytes each.
Network scan: Each scan supports 128 bytes of network input and 128 bits of output.
specification
Size: Depending on the search results, the size will vary slightly. One is described as 166mm x 112mm x 36mm and the other is 170mm x 105mm x 32mm.
Weight: about 375g (one description), or about 120g (another description).
Voltage range: Input voltage range is 12-48VDC, output voltage is 5VDC, and maximum output current is 10A. There are also descriptions that mention voltage ranges including 220VDC, but this may be related to specific application scenarios.
Parameters and specifications
Product type: CC-U/STD Universal Signal Converter.
Configuration: There may be more than 120 configurations.
Electrical isolation: 3-way electrical isolation.
Input signal interrupt response: Configurable output signal response (low fail-safe/high fail-safe).
Input signal range: including 0.9 MA… 55 milliamps, 45 millivolts… 11 volts, 470 ohms… 1 milliohm and many other ranges.
Output signal range: 0… 55 mah, 0… 11V and many other ranges.
Rated power supply voltage: 24-48 V DC.
Accuracy: 0.1% of full scale.
Response time: 200 seconds.
Ambient temperature range: -20… +60 ° C (standard) / -40 ° C… +80 degrees Celsius (extended).
Size and weight
Dimensions: Length x width x height = 12.0 x 2.25 x 10.5 cm.
Weight: 0.125 kg (product itself), shipping weight is 1Kg.
Parameters and specifications
Input type: Eight analog sensor signal input channels support different signal ranges, including 0 to 20mA DC (FBM201), 0 to 100mV DC (FBM201b), 0 to 5V DC (FBM201c), and 0 to 10V DC (FBM201d).
Input channel isolation: Each analog input channel is isolated from other channels and ground currents.
Communication interface: communicates with its associated FCM or FCP via a redundant 2 Mbps module fieldbus.
Calibration requirements: No calibration modules and terminal components are required.
Size and weight
Dimensions: Length x width x height = 10.4cm x 4.5cm x 11.4cm.
Weight: 0.284 kg
Parameters and specifications
Usage: Automatic voltage regulation, widely used in industrial automation systems, processing analog signal input.
Range: Some sources mention a range of 150-210, but do not specify the specific unit, which may be applicable to voltage or other parameters.
Accuracy: 0.5-0.5 (may refer to a certain accuracy range, but the specific meaning may need further explanation).
Supply voltage: May include three-phase 380-480VAC (note, however, specific values may vary depending on application scenario and configuration).
Operating voltage: Some information mentions an operating voltage of 180V.
Size and weight
Size:
One way to say it is 2501050mm.
Another way to say it is 251815 (width x height x thickness).
trait
High reliability: The use of high-quality materials and design, with high reliability and stability.
High performance: Has a wide input voltage range and efficient power conversion capability.
Multiple protection functions: including overload protection, short circuit protection, etc., to protect equipment from power failures.
Differential drive pulse receiving mode: it can effectively suppress the interference and make the system run smoothly in the process of acceleration and deceleration.
Rich interfaces and protocols: such as Modbus TCP/IP, Ethernet, etc., can easily connect and communicate with various industrial equipment.
Parameters and specifications
Density range: The density of each module ranges from 4 points to 32 points.
Module rate: IP20, Class I, 2/ZONE 2.
Scalability: Has an additional slot that supports heat exchange and can be plugged into various option modules (POM), including USB, Ethernet, RJ12 RS-232, 3PIN RS-485 and 3PIN RS-232 versions.
Integration: No base or backplane is required, and up to eight I/O modules can be expanded, depending on the model used. In addition, it offers 27 discrete I/O expansion module versions, including 8, 12, and 16-point versions, enabling the system to scale to up to 164 discrete I/O points.
I/O module type: including analog and switching two types, each I/O module can be directly plugged into the terminal board CPU local or through the FBP distributed expansion of the sub-station.
In some messages, it is described as an analog input/output module for receiving and sending analog signals (such as current signals 4-20 mA), mounted on the Series 90-70 substrate.
Among other information, it is described as a 32-channel digital input/output (DIO) module used in GE Fanuc 90-30 series PLC systems.
Parameters and specifications
Communication rate: Supports a variety of communication rates, including 9.6kBit/s, 19.2 kBit/s, 45.45kBit/s, 93.75kBit/s, 187.5kBit/s, 500kBit/s, 1.5MBit/s, 6MBit/s, and 12MBit/s.
Power supply: Dual power supply redundant input, DC(9-36)V, typical DC24V, power consumption is less than 4W, with DC1500V voltage isolation and reverse protection function.
Lightning protection, overcurrent, surge protection: The electrical interface has 4000V lightning protection, 1.5A overcurrent protection and 600W surge protection.
Electrical connection: 9-pin Sub_D jack connector, pin definition according to Profibus DP protocol specification.
The IC687BEM713C is one of the modules in GE Fanuc (now GE Digital Energy) PLC (Programmable Logic Controller) family. GE Fanuc’s PLC family includes a wide range of modules and components for automation and control systems.
trait
Bus communication: IC687BEM713C is a bus transmission module designed to implement bus communication in GE Fanuc PLC systems.
Compatibility: This module may be compatible with other GE Fanuc PLC modules to support complex automation and control tasks.
Function: As a bus transmission module, it may be responsible for transmitting data and control signals between different components in a PLC system.
