Output: Eight output channels are available, each of which can output an analog signal from 4 to 20mA, or a digital HART® signal superimposed on a 4 to 20mA analog signal.
Communication: Supports HART generic commands for two-way digital communication with HART field equipment.
Power supply: 24V.
Current: In the range of 100-400A (but note that this may be different from the operating current of the module itself and may refer to the range of currents it can handle).
Memory: Up to 128MB of memory expansion capacity.
Operating ambient temperature: -40 to 100 degrees Celsius or -20 to +70 degrees Celsius
Input voltage: The input voltage varies for different types of SDSC-POW-4 products. For example, some products support AC 380V±10%, 3-phase, 50/60Hz; Some products input voltage is 200-240V AC; Products also support a wide supply voltage range (24-240VAC/VDC).
Output voltage: The output voltage is also different for different models. For example, the output voltage of some products is DC 24V; Some products output voltage is DC 0-500V; The output voltage of other products depends on the specific configuration and demand.
Output power: For example, the output power of a certain model is 45KW.
Rated current: Some products rated current is 40A.
Control mode: such as a model using digital SPWM control.
Operating temperature: Depending on the product and application, the operating temperature range varies, such as -20°C to 70°C, or -10 °C to 50 °C.
Communication interface: Some products provide RS485 communication interface.
Size and weight:
Size and weight will vary for different models and configurations. For example, the external dimensions of a certain model are 480mm x 280mm x 300mm and the weight is about 20kg.
The BENTLY 3500/45 is a four-channel monitor that accepts input from a variety of sensors, including proximity eddy current sensors, rotary position sensors (RPT), DC linear variable differential converters (DCLVDT), AC linear Variable differential converters (AC LVDT), and rotary potentiometers.
The monitor channels are programmed in pairs to perform up to two functions at a time, such as axial (lateral) position, differential expansion, standard single bevel differential expansion, non-standard single bevel differential expansion, double bevel differential expansion, compensation differential expansion, shell expansion and valve position.
Alarm point setting: Any value measured by the monitor can be used as the alarm point, and any two values measured can be used as the danger point. All alarm setting points are set through the software configuration, the alarm value can be adjusted, and usually can be arbitrarily set within the range of 0 ~ 100% of the full scale of the respective measurement value.
Number of channels: The FBM237 has eight 20mA dc analog output channels.
Output range (per channel) : 0-20.4mA dc.
Output load: Maximum 750Ω.
Power requirements: Input voltage range is 24V dc +5%, -10%.
Power consumption: 7W (Max).
Heat dissipation: 3.5W (Max).
Vibration: 0.75g (5 to 200Hz).
Communication: Communicates with the corresponding FCM via the component fieldbus. Fieldbus communication Communication with the control station is via an optional redundant 10Mbps Ethernet fieldbus.
