Model: 8LSA55.EB030D200-1
Voltage: 24V (note that this is different from the standard voltage of some servo motors and may be a voltage for a specific application or configuration)
Current: 100-400A (This indicates that the motor has a large current range and may be suitable for different load conditions)
Output frequency: 50HZ
Weight: Depending on the search results, there are two possible weights: 2KG1 or 9.2kg.
Architecture: Based on the PowerPC750 architecture, this is a 32-bit RISC processor
Processing power: The MCP750 has a high-performance processor that is suitable for handling complex control algorithms and data processing tasks
Operating system support: Support a variety of embedded operating systems, such as VxWorks, Linux, etc
Communication interface: including Ethernet, serial port, CAN bus, etc., easy to communicate and integrate with other control systems, PLC, HMI and sensors and other devices
Voltage: 24V (In some cases, as mentioned in [4], the current range is 100-400A, but the voltage is still 24V)
Current: The exact current value may vary depending on the application scenario, but as shown in [4], the current range is 100-400A in at least one case
Processor capabilities: Equipped with high-performance processors with fast data processing and decision making capabilities
Communication interface: Supports a variety of communication interfaces, such as Modbus RTU, Modbus TCP/IP, and possibly Ethernet, CAN bus, RS485, etc. 123
Size and weight
Weight: 2KG
Wide input voltage range: can adapt to different power supply environments.
Overvoltage protection: has the function of overvoltage protection to prevent the equipment from being damaged due to overpressure
Short-circuit protection: with short-circuit protection function to prevent short-circuit damage to the equipment
Over-temperature protection: It has the over-temperature protection function to prevent overheating from causing damage to the equipment
High performance: With high performance, it helps to save energy and reduce operating costs
Modular design: easy to install, maintain and replace
Number of entries: 24
Input type: dry contact
Input signal level: 24 V DC
Output quantity: 12
Output type: Relay output
Output signal level: 24 V DC
Rated current: 10 A
Rated voltage: 250 V AC/DC
Communication interface: Two Ethernet ports (100Base-TX)
Power supply: 24V DC
Input/Output type: TTL Logical level I/O
Data transmission capability: Support 8-bit, 16-bit and 32-bit data transmission
Storage capacity: 1 GB
Data transfer rate: 100 MB/s
Input voltage range: 100-240VAC; Input voltage (DC) : 24VDC
Output voltage: 24VDC
Maximum output current: 15A
Receiving capacity: 64mA (current absorption capacity); 15mA (Source current)
Input voltage: 90-132VAC or 180-264VAC
Input frequency: 47-63Hz
Efficiency: >80%
Ripple and noise: +5V:<2mVrms, +15V:<1mVrms, -15V:<1mVrms
Protection function: over voltage protection, over current protection, short circuit protection, over temperature protection
Dimensions: 216mm x 102mm x 41mm (L x W x H)
Weight:
1.2kg (one possible weight)
0.8 kg
Operating temperature: 0°C to 50°C
Storage temperature: -40°C to 70°C
Reliability: Provides reliable overspeed detection and monitoring
Adjustability: Has adjustable speed threshold and response Settings
Alarm system: Visual and auditory alarms for immediate notification
High precision: High precision in specific applications, such as temperature measurement
Wide operating temperature range: can work in a wide range of temperatures
Scope of work:
X-axis system:
Working mode: including diversity electrode voltage (Vc), base voltage (Vb), diode voltage (Vd) and step signal four categories
Displacement range: greater than 10 degrees
Features:
Communication module: With communication function, you can communicate through HDMI interface.
Power module: In industrial automation and control systems, mainly used to provide stable and reliable power supply.
Stable power supply: Provides stable and continuous power supply to ensure the normal operation of other components of the system.
Efficient conversion: with high power conversion efficiency, reduce energy waste.
Multiple protection functions: Over-voltage, over-current, over-temperature and other protection functions to ensure safe and stable operation of the system.
The S30301-PB is primarily used for automation and control of industrial systems, providing accurate electrical control and position feedback.
It can be used in various applications such as robots, machine tools, printing presses, packaging mechanisms, etc.
As Kollmorgen’s servo driver or controller, the S30301-PB can be characterized by high precision, high dynamic performance, multiple control modes and interface options.
It can support various communication protocols, such as EtherCAT, CANopen, etc., for communicating with other devices and systems.
The S30301-PB can also have properties that are easy to program and configure to meet the needs of different applications.
Use: Industrial automation
Operating voltage: 48V
Output frequency: 50Hz
Ambient temperature: -40~70℃
Ambient humidity: 75%
Product certification: CCC
User memory: 48 MB
Power consumption: 5.0W (typical), 7.0W (maximum)
Redundant design: Support two independent Ethernet connections, when a network connection problems, the other standby connection can immediately take over, to ensure the continuity of network communication
Fast switching: In the event of a working component failure (such as power failure, restart, software failure, hardware failure, etc.), the standby component can take over all control tasks of the working component quickly and without interference at the millisecond or even microsecond level, ensuring that field control is not affected
Fault detection and alarm: It can accurately and timely discover faults, and send alarms through network communication or local LED display to notify users of faulty parts and conditions for timely maintenance
High availability and fault tolerance: It is suitable for fields that need to ensure the reliability and stability of network connections, such as industrial automation and process control