Grid view List view

Showing 1297–1308 of 21200 results

BENTLY 135799-01

¥2,599.00

Product Parameters

Parameter Category Specific Specifications
Module Type 3500 Series 8-channel Form C (SPDT) relay output module
Relay Configuration 8 independent Form C (SPDT) relays (NO/NC/Common)
Contact Rating 5 A @ 250 VAC, 5 A @ 30 VDC (resistive load); 2 A @ 250 VAC (inductive load)
Alarm Functions Configurable latching, delay (0-100s), auto-reset, manual-reset
Input Signals Digital alarm signals from 3500 Series I/O modules (vibration, temperature, speed)
Diagnostic Features Relay coil open/short detection, contact wear monitoring
Operating Temperature -40°C ~ 70°C
Protection Grade IP20 (rack installation)
Power Supply 24 VDC (from 3500 rack power module, e.g., BENTLY 129486-01)
Compatibility Bently 3500/40M vibration modules, 3500/25 Keyphasor modules, 3500/05 frame controller
Certification UL 508, CE, ATEX, IECEx, SIL 2 certified
Dimensions (L×W×H) 147 mm × 102 mm × 38 mm
Weight 0.7 kg

BENTLY 135785-01

¥5,299.00

Core Monitoring Specifications

  • Speed Measurement Range: 0–100,000 RPM (configurable in 0.1 RPM increments)
  • Keyphasor Input: 1 channel (compatible with inductive, optical, or magnetic sensors)
  • Speed Accuracy: ±0.01 RPM (at steady state), ±0.1 RPM (transient conditions)
  • Phase Resolution: 0.1° (for keyphasor-based vibration analysis)
  • Alarm Thresholds: Programmable overspeed (1st/2nd stage), underspeed, and speed rate-of-change alarms

BENTLY 135613-01-00

¥2,599.00

Product Parameters

Parameter Category Specific Specifications
Module Type 3500 Series multi-channel temperature monitoring module
Input Channels 8 independent channels (per module)
Supported Sensors RTDs (PT100, PT1000, Cu50), Thermocouples (Type K/J/T/E/R/S/B)
Measurement Range -200°C ~ +850°C (thermocouples), -200°C ~ +400°C (RTDs)
Measurement Accuracy ±0.1°C (RTDs, 0°C ~ +100°C), ±1°C (thermocouples, 0°C ~ +500°C)
Resolution 0.01°C (RTDs), 0.1°C (thermocouples)
Output Signals 4-20 mA (per channel), 0-10 V analog output, digital alarm relays
Diagnostic Features Sensor open/short circuit detection, cold junction compensation (thermocouples)
Operating Temperature -40°C ~ 70°C
Protection Grade IP20 (rack installation)
Power Supply 24 VDC (from 3500 rack power module, e.g., BENTLY 129486-01)
Compatibility Bently 3500/05 frame controller, 3500/40M vibration modules, System 1 software
Certification UL 508, CE, ATEX, IECEx
Dimensions (L×W×H) 147 mm × 102 mm × 38 mm
Weight 0.6 kg

BENTLY 135137-01

¥5,999.00

Core Monitoring Specifications

  • Measurement Types: Shaft displacement (radial), thrust position, radial vibration
  • Displacement Range: 0–2 mm (8 mm proximity probes), 0–5 mm (11 mm proximity probes)
  • Vibration Range: 0–500 μm peak-peak (0–25.4 mm/s RMS)
  • Measurement Accuracy: ±0.1% full scale (displacement), ±0.5% full scale (vibration)
  • Frequency Response: 0.5–1000 Hz (vibration), DC–500 Hz (displacement)
  • Input Channels: 4 independent channels (compatible with Bently 3300 XL proximity probes)

BENTLY 133916-01

¥5,299.00

Product Parameters

Parameter Category Specific Specifications
Module Type 3500 Series vibration transducer interface module
Input Channels 4 independent channels (per module)
Sensor Compatibility IEPE accelerometers (2-10 VDC excitation), velocity sensors (0-5 V output)
Signal Conditioning Gain: 1-100x (configurable), Low-pass filter: 0.1-1000 Hz (adjustable)
Measurement Range 0-50 g (acceleration), 0-50 mm/s (velocity), 0-500 μm (displacement)
Output Signal 4-20 mA (per channel), 0-10 V analog output, digital status signals
Excitation Voltage 24 VDC ±5% (for IEPE sensors, configurable current limit: 0-20 mA)
Operating Temperature -40°C ~ 70°C
Protection Grade IP20 (rack installation)
Power Supply 24 VDC (from 3500 rack power module, e.g., BENTLY 129486-01)
Compatibility Bently 330500 accelerometers, 3500/25 Keyphasor modules, 3500/05 frame controller
Certification UL 508, CE, ATEX, IECEx
Dimensions (L×W×H) 147 mm × 102 mm × 38 mm
Weight 0.5 kg

BENTLY 133442-01

¥999.00

Core Power Specifications

  • Input Voltage: 100–240 VAC (50/60 Hz) or 120–300 VDC (dual input options)
  • Output Voltage: 24 VDC ±1% (regulated)
  • Output Current: 10 A (continuous), 15 A (peak for 10 seconds)
  • Redundancy Support: N+1 configuration (up to 4 modules per 3500 rack)
  • Efficiency: ≥92% (full load)

BENTLY 129486-01

¥2,599.00

Product Parameters

Parameter Category Specific Specifications
Module Type 3500 Series redundant power supply module
Input Voltage 100-240 VAC (50/60 Hz) or 120-300 VDC (dual redundant inputs)
Output Voltage 24 VDC ±1% (regulated)
Output Current 10 A (continuous), 15 A (peak for 10 seconds)
Load Regulation ±0.5% (full load range)
Protection Features Overvoltage, overcurrent, short-circuit, over-temperature protection
Operating Temperature -40°C ~ 70°C
Protection Grade IP20 (rack installation)
Compatibility Bently 3500/25 Keyphasor modules, 3500/40M vibration modules, 3500/05 frame controller
Certification UL 508, CE, ATEX, IECEx
Dimensions (L×W×H) 147 mm × 102 mm × 38 mm
Weight 0.8 kg
MTBF (Mean Time Between Failures) 500,000 hours (per MIL-HDBK-217F)

BENTLY 128229-01

¥999.00

Core Monitoring Specifications

  • Input Channels: 4 independent channels (2 for vibration, 2 for temperature)
  • Vibration Measurement Range: 0–50 mm/s (RMS), 0–1000 μm (peak-peak displacement)
  • Temperature Measurement Range: -50°C to +200°C (compatible with PT100 RTDs, thermocouples Type K/J)
  • Measurement Accuracy: ±0.1% FS (vibration), ±0.5°C (temperature)
  • Frequency Response: 0.5–1000 Hz (vibration), DC–10 Hz (temperature)
  • Alarm Capabilities: Programmable first-level (warning) and second-level (trip) thresholds per channel

BENTLY 125840-02

¥5,299.00

Product Parameters

Parameter Category Specific Specifications
Module Type 3500 Series industrial communication gateway module
Supported Protocols Ethernet/IP, Modbus TCP, OPC UA, Bently proprietary protocol (for System 1)
Network Interfaces 2× RJ45 (10/100/1000 Mbps), redundant configuration supported
Data Transmission Latency ≤10ms (real-time sensor data)
Connection Capacity Up to 32 3500 Series I/O modules per gateway, 16 concurrent client connections
Operating Temperature -40°C ~ 70°C
Protection Grade IP20 (rack installation)
Power Supply 24 VDC redundant power supply (±10%)
Compatibility Bently 3500/25 Keyphasor modules, 3500/40M vibration modules, 3500/05 frame controller
Certification ATEX, IECEx, UL 508, CE, FCC Part 15
Dimensions (L×W×H) 147 mm × 102 mm × 38 mm
Weight 0.6 kg
Security Features SSL/TLS encryption, access control lists (ACLs), password protection

BENTLY 125808-01

¥999.00

Core Communication Specifications

  • Communication Protocols: Modbus TCP/IP, OPC UA, Ethernet/IP, Bently proprietary API
  • Network Interfaces: 2× Gigabit Ethernet ports (RJ45), 1× fiber optic port (single-mode, optional)
  • Data Transfer Rate: Up to 1 Gbps (Ethernet), 100 Mbps (fiber)
  • Latency: ≤50 ms (real-time data transmission)
  • Supported Data Types: Process values, alarm statuses, diagnostic logs, trend data

BENTLY 125800-01 3500/25

¥5,299.00

Product Parameters

Parameter Category Specific Specifications
Module Type 3500 Series Keyphasor® speed/phase monitoring module
Input Channels 2 independent Keyphasor inputs (redundant configuration supported)
Input Signal Type Eddy current proximity probe (0-20 V peak-to-peak), TTL logic input
Speed Measurement Range 0.1 RPM to 100,000 RPM
Phase Accuracy ±0.1° (at rated speed)
Timing Resolution 1 μs (Keyphasor event capture)
Output Signals 4-20 mA (speed), relay contact (over/under speed alarm), digital pulse (synchronized)
Communication Interface Modbus TCP/Ethernet (for data upload to System 1 software)
Operating Temperature -40°C ~ 70°C
Protection Grade IP20 (rack installation)
Power Supply 24 VDC redundant power supply (±10%)
Compatibility Bently 3300 XL proximity probes, 3500/40M vibration modules, 3500/05 frame controller
Certification ATEX, IECEx, UL 508, CE
Dimensions (L×W×H) 147 mm × 102 mm × 38 mm
Weight 0.5 kg

BENTLY 106M1081-01

¥5,999.00

Core Functional Specifications

  • Probe Compatibility: Bently 3300 XL 8 mm, 11 mm, and 25 mm proximity probes
  • Measurement Range: 0–2 mm (8 mm probes), 0–5 mm (11 mm probes), 0–12 mm (25 mm probes)
  • Output Signal: 4–20 mA DC (proportional to shaft displacement) + 0–10 V DC (auxiliary output)
  • Measurement Accuracy: ±0.1% of full scale (at 25°C)
  • Response Time: ≤10 ms (signal processing latency)
  • Excitation Voltage: -24 VDC (for proximity probe power)