series
3BHT300032R1 May be the number of a specific model or part under ABB or other industrial automation brands, but it may be necessary to consult the official documentation of the relevant product or contact the manufacturer for accurate information. From the search results, it may be related to ABB’s DCS (Distributed control System) or robot system module spare parts.
Working voltage: DC24V (18-36V)
Power: 7.5W
Frequency: 45-65Hz
Number of tension units: 2
Excitation signal current: 0.5Ams, 330Hz
Operating temperature range: -20°C to +50°C (or +5-+55°C, depending on the source)
Storage temperature range: -40°C to +70°C
Ambient humidity: 5% to 95% relative humidity (no condensation)
specification
Dimensions: 170mm x 105mm x 32mm
Weight: About 120g
argument
Processor type: Intel Pentium M
Processor speed: 1.4GHz
Memory capacity: 1 GB DDR2
Storage capacity: 80 GB SATA
Communication ports: 6 USB 2.0, 4 serial ports, 2 Ethernet ports, 1 VGA port
Voltage: 24V (depending on some information)
Current: May support up to 100-400A (depending on some information)
specification
Scope of application: Industrial control
Product model: PPC902AE101 3BHE010751R0101
Operating system: Windows XP Embedded
Support programming languages: C++, C#, VB, Java, etc
Supported software platforms: AC500, AC800M, Freelance, etc
argument
Input voltage:
High voltage AC: 175 to 264 Vac rms (247 to 373 Vac, pk), 47 to 63Hz
Low voltage AC: 85 to 132 Vac rms (120 to 188 Vac, pk), 47 to 63 Hz
HVDC: 88 to 140 Vdc
Low voltage DC: 20 to 30 Vdc
Operating frequency: 47 to 63 Hz
Out-of-limit protection: For all power supply types, low voltages will not damage the power supply or PIM, but out-of-range voltages will open fuses on the PIM
Power OK LED: When the power is working normally, the LED lights up
Operating temperature: -30℃ to +65℃ (-22 F to +150 F)
Storage temperature: -40℃ to +85℃ (-40 F to +185 F)
argument
Power supply voltage: up to 80V DC, providing better dynamic drive performance of the motor.
Driving current: bipolar constant current driving mode, the maximum driving current can reach 6.0A per phase.
Communication protocols: Support a variety of communication protocols, such as Modbus, DNP3, IEC 60870-5-103 and IEC61850, and comply with the substation IEC61850 communication standard.
specification
Features: The RED615 provides selective split-phase line differential protection, which can be monitored by sensors or traditional CT or PT. It also has directional overcurrent, non-directional overcurrent, ground protection, voltage, frequency protection and measurement functions.
Configuration: The RED615 has pre-configured standard configurations, including line differential communication, so that it can be combined faster and easier to meet the different application needs of users.
argument
Voltage: 24V (there may be other voltage options, but this information is more common)
Current: Up to 1.0A May be supported (similar to the output current characteristics of the A6220/A6410/A6824)
Output voltage range: Optional from 1.0V to 5.0V
Thermal protection: With thermal protection and thermal overload protection function, when the junction temperature exceeds TJ=165°C, the OTP circuit will start the thermal shutdown function
specification
Technology based: Possible CMOS based low voltage differential positive voltage regulator
Design recommendations: It is recommended that PCB design use separate ground planes for VDD and VOUT, and that each ground plane is connected only at the GND pin of the device. VDD and GND lines should be wide enough to reduce impedance and noise
argument
Input voltage: 100-600VAC
Rated frequency: 50/60Hz
Output: 4-20mA and 0-10VDC
Operating temperature range: -25℃ to +70℃
Power supply voltage: 100-240VAC (for power input)
Relative humidity: 20-95%RH (non-condensing)
specification
Size: There are many versions, such as 72mm x 72mm x 83mm,
argument
Input voltage: 120/240 VAC
Output voltage: 0-10 VDC
Input current: 0-20 mA
Output current: 4-20 mA
Frequency: 50/60 Hz
Power consumption: 5W
Operating temperature: -40°C to 85°C
Storage temperature: -40°C to 125°C
Humidity: 0 to 95% non-condensing
specification
Model: 5466-316
Manufacturer: WOODWARD
argument
Processor type: AMD SC250 or AMD SC520 (different terms, but both are embedded processors)
Processor speed: 133 MHz
User memory: 240 KB
I/O points: 2048 fixed discrete input and output points
Discrete global storage capacity: 1280 bits
Register memory: can be configured from 128 to 32,640 words
System registers: 28 fixed system registers
Timer/counter: About 2000
Rated power: 7.4W (some say 3W, may be different versions or configurations)
Supply voltage: 5V DC or 24V DC (varies, may be different versions or configurations)
Communication speed: Ethernet communication up to 100 Mbps is supported
argument
Memory size: 16 MB SDRAM, 32 MB flash
Input voltage (redundant voltage) : 24 V DC typical value
Power consumption (per non-fault-tolerant module) : Max. 8.5W
Operating temperature: 0 to +60 degrees Celsius (+32 to +140 degrees Fahrenheit)
specification
Configuration: Single processor module. The fault-tolerant type consists of two processor modules with an interconnected fault-tolerant connector integrated on the substrate
argument
Input voltage: 24VDC
Maximum output current: 10A
Detection distance: 500 mm
Light source: Visible red semiconductor laser, wavelength 655 nm
Ambient temperature: -10 to +50 °C (without freezing)
specification
Size: 10cm × 12cm × 4cm (product size)
Weight: About 70g (product weight), another saying is 0.5kg
Power: Maximum output power up to 5KW
Output characteristics: Maximum output current 300A
argument
Voltage:
AC power supply: Redundant wide voltage 100~240V AC (50~60Hz 1.2A)
DC power supply: Redundant wide voltage 48V DC
Forwarding speed:
10MB forwarding speed: 14881pps
100 Mbit/s forwarding speed: 148810pps
Gigabit forwarding speed: 1488096pps
System switching bandwidth: 56Gbps
Cache size: 1.5Mbits
MAC address table: 16K