Grid view List view

Showing 109–120 of 19874 results

GE IS200EMIOH1ACA

¥999.00

Product Parameters

  1. Module Type: Multi-function mixed I/O module, exclusive to GE Mark VIe Distributed Control System (DCS)
  2. Channel Configuration: 8 analog input channels + 16 digital input channels + 8 digital output channels, optimized for mixed-signal industrial workflows
  3. Analog Input Specifications: 4-20 mA / ±10 VDC configurable inputs, 16-bit resolution; compatible with temperature sensors, pressure transmitters, and flow transducers
  4. Digital Input Specifications: 24 VDC sinking/sourcing inputs, input response time < 500 µs; compatible with limit switches, proximity sensors, and safety interlocks
  5. Digital Output Specifications: 24 VDC solid-state (MOSFET) outputs, 0.5 A per channel, 4 A maximum per module; short-circuit and thermal protected
  6. DCS Compatibility: Fully compatible with GE Mark VIe controllers, I/O racks (IS200IRTDH1B), backplane power supplies (IS200BPPBH2B), and software (ToolboxST, CIMPLICITY)
  7. Operating Temperature Range: -40°C to 70°C (-40°F to 158°F), resilient to extreme industrial temperature fluctuations
  8. Power Consumption: 3.2 W (typical) at 24 VDC input, 3.9 W (max), energy-efficient for 24/7 continuous operation
  9. Physical Dimensions: 130 mm × 80 mm × 110 mm (5.12 in × 3.15 in × 4.33 in), rack-mountable in GE Mark VIe standard I/O cabinets
  10. Certifications: UL 508, CE, IEC 61131-2, ATEX (Zone 2), IEEE 1613, and IEC 62443 compliant, meeting global safety and cybersecurity standards
  11. Operating Humidity: 5% – 95% (non-condensing), adaptable to humid industrial settings
  12. Protection Features: Built-in ESD protection (±10 kV contact, ±15 kV air), surge protection (±2 kV) for analog inputs, channel-to-channel isolation (250 VAC)
  13. Diagnostic Capabilities: Channel-level fault detection, analog signal drift monitoring, digital open/short circuit alerts, and LED indicators for module and channel health
  14. MTBF: Exceeds 210,000 hours, ensuring long-term reliability in mission-critical DCS applications
  15. Signal Conditioning: Integrated low-pass filtering for analog channels to reduce electromagnetic interference (EMI) from industrial machinery

GE IS200EMIOH1A

¥999.00

Product Parameters

Parameter Category Specifications
Module Type Industrial Mixed Analog-Digital Input/Output (I/O) Module
Compatible Platform GE Mark VIe Distributed Control System (DCS)
Analog Input Channels 8 differential channels, supports 4-20 mA DC, 0-10 V DC, PT100 RTDs
Analog Output Channels 4 differential channels, supports 4-20 mA DC, 0-10 V DC
Digital Input Channels 16 isolated channels, 24 V DC (sinking input), 5 mA per channel
Digital Output Channels 16 isolated relay channels, 2 A @ 250 V AC / 2 A @ 30 V DC per channel
Signal Accuracy Analog: ±0.1% of full scale; Digital: Response time ≤1 ms (input), ≤5 ms (output)
Isolation Level Channel-to-channel isolation (500 V AC, 1 minute); Field-to-system isolation (1000 V AC, 1 minute)
Communication Interface Mark VIe high-speed backplane bus
Operating Temperature Range -40°C to 70°C
Storage Temperature Range -40°C to 85°C
Power Supply Requirement 24 V DC (from Mark VIe backplane)
Power Consumption 6.5 W (typical)
Dimensions (W x H x D) 64 mm x 178 mm x 229 mm
Weight 0.98 kg
Protection Features Over-voltage protection, over-current protection, short-circuit protection, EMI shielding, surge protection (up to 2 kV)
Certifications CE, UL, cUL, ATEX, IECEx, ISO 9001, FCC
MTBF (Mean Time Between Failures) 1,950,000 hours

GE IS200EISBH1A

¥999.00

Product Parameters

  1. Module Type: Integrated industrial safety interlock module, exclusive to GE Mark VIe Distributed Control System (DCS)
  2. Channel Configuration: 24 safety interlock input channels + 16 safety output channels, optimized for personnel and equipment protection workflows
  3. Input Specifications: 24 VDC sinking/sourcing safety inputs, input response time < 200 µs; compatible with safety door switches, emergency stop (E-Stop) buttons, light curtains, and two-hand control devices
  4. Output Specifications: 24 VDC solid-state (MOSFET) safety outputs with fail-safe mode (de-energized on module fault), 0.8 A per channel, 6 A maximum per module; short-circuit, overload, and thermal protected
  5. Safety Compliance: SIL 2 certified, compliant with EN ISO 13849-1 and IEC 61508 standards for safety-related control systems
  6. DCS Compatibility: Fully compatible with GE Mark VIe controllers, I/O racks (IS200IRTDH1B), backplane power supplies (IS200BPPBH2B), and safety software (ToolboxST, CIMPLICITY)
  7. Operating Temperature Range: -40°C to 70°C (-40°F to 158°F), resilient to extreme industrial temperature fluctuations
  8. Power Consumption: 3.5 W (typical) at 24 VDC input, 4.2 W (max), energy-efficient for 24/7 continuous safety monitoring
  9. Physical Dimensions: 130 mm × 80 mm × 110 mm (5.12 in × 3.15 in × 4.33 in), rack-mountable in GE Mark VIe standard I/O cabinets
  10. Certifications: UL 508, CE, IEC 61131-2, ATEX (Zone 2), IEEE 1613, IEC 62443, and SIL 2 compliant, meeting global safety and cybersecurity standards
  11. Operating Humidity: 5% – 95% (non-condensing), adaptable to humid industrial settings
  12. Protection Features: Enhanced ESD protection (±12 kV contact, ±15 kV air), surge protection (±2.5 kV), channel-to-channel isolation (500 VAC), and reverse-polarity protection
  13. Diagnostic Capabilities: Safety interlock fault logging, channel-level status monitoring, fail-safe mode alerts, and LED indicators for safety input/output states
  14. MTBF: Exceeds 230,000 hours, ensuring long-term reliability in mission-critical safety applications
  15. Redundancy Features: Cross-channel redundancy for critical interlock functions, module health self-diagnostics, and fault signal output for DCS safety alarms

GE IS200EHPAG1A

¥999.00

Product Parameters

Parameter Category Specifications
Module Type Industrial High-Power Gigabit Ethernet Communication Module
Compatible Platform GE Mark VIe Distributed Control System (DCS)
Communication Ports 2 x 10/100/1000 Mbps Gigabit Ethernet ports (RJ45), auto-negotiation and full-duplex support
Network Redundancy Built-in Hot Standby redundancy, automatic failover ≤ 50 ms
Supported Protocols Ethernet/IP, Modbus TCP, OPC UA, GE SRTP, IEC 61850, DNP3
Data Transfer Rate Up to 1 Gbps
Power Distribution 4 isolated power output channels, 24 V DC, 5 A per channel (total maximum load: 15 A)
Power Regulation Accuracy ±0.3% of output voltage (24 V DC)
Communication Interface Mark VIe high-speed backplane bus
Operating Temperature Range -40°C to 70°C
Storage Temperature Range -40°C to 85°C
Input Power Requirement 24 V DC (from Mark VIe backplane, input range: 19 – 29 V DC)
Module Power Consumption 8.2 W (typical, excluding distributed power)
Dimensions (W x H x D) 64 mm x 178 mm x 229 mm
Weight 1.1 kg
Protection Features Over-voltage protection, over-current protection, short-circuit protection, thermal shutdown, EMI shielding, surge protection (up to 2.5 kV)
Certifications CE, UL, cUL, ATEX, IECEx, ISO 9001, FCC, IEEE 802.3 compliant
MTBF (Mean Time Between Failures) 2,200,000 hours

GE IS200EGPAG1B

¥999.00

Product Parameters

  1. Module Type: High-precision generator protection & control module, exclusive to GE Mark VIe Distributed Control System (DCS)
  2. Channel Configuration: 12 analog input channels (protection sensors) + 20 digital input channels (status/interlocks) + 8 digital output channels (protection/control signals), optimized for generator safety workflows
  3. Analog Input Specifications: 4-20 mA / ±10 VDC configurable inputs, 16-bit resolution; compatible with current transformers (CTs), voltage transformers (VTs), frequency sensors, and temperature transducers
  4. Digital Input Specifications: 24 VDC sinking/sourcing inputs, response time < 300 µs; compatible with generator breaker status, fault interlocks, and synchronization sensors
  5. Digital Output Specifications: 24 VDC solid-state outputs, 1.0 A per channel, 6 A maximum per module; for tripping circuit breakers, activating alarms, and triggering emergency shutdowns
  6. Generator Protection Functions: Built-in logic for overcurrent, overvoltage, undervoltage, overfrequency, underfrequency, reverse power, and overtemperature protection; configurable trip thresholds via GE ToolboxST
  7. Control Capabilities: Generator synchronization support, load sharing control, and automatic voltage regulation (AVR) signal output; compatible with GE generator excitation systems
  8. DCS Compatibility: Fully compatible with GE Mark VIe controllers, I/O racks (IS200IRTDH1B), backplane power supplies (IS200BPPBH2B), and software (ToolboxST, CIMPLICITY)
  9. Operating Temperature Range: -40°C to 70°C (-40°F to 158°F), resilient to extreme industrial temperature fluctuations
  10. Power Consumption: 3.8 W (typical) at 24 VDC input, 4.5 W (max), balanced for high performance and energy efficiency
  11. Physical Dimensions: 130 mm × 80 mm × 110 mm (5.12 in × 3.15 in × 4.33 in), rack-mountable in GE Mark VIe standard I/O cabinets
  12. Certifications: UL 508, CE, IEC 61131-2, ATEX (Zone 2), IEEE 1613, IEC 62443, and SIL 2 compliant, meeting global safety and cybersecurity standards
  13. Operating Humidity: 5% – 95% (non-condensing), adaptable to humid generator rooms and offshore power facilities
  14. Protection Features: Enhanced ESD protection (±12 kV contact, ±15 kV air), surge protection (±2.5 kV) for analog inputs, channel-to-channel isolation (500 VAC), and reverse-polarity protection
  15. Diagnostic Capabilities: Fault type identification, trip event logging with time-stamping, sensor health monitoring, and LED status indicators for protection/control modes
  16. MTBF: Exceeds 220,000 hours, ensuring long-term reliability in mission-critical generator applications

GE IS200EGPAG1BEC

¥999.00

Product Parameters

Parameter Category Specifications
Module Type Industrial Gigabit Ethernet & Power Distribution Integrated Module
Compatible Platform GE Mark VIe Distributed Control System (DCS)
Communication Features 2 x 10/100/1000 Mbps Gigabit Ethernet ports (RJ45), auto-negotiation support
Redundancy Support Built-in network redundancy (Hot Standby), automatic failover ≤ 50 ms
Supported Protocols Ethernet/IP, Modbus TCP, OPC UA, GE SRTP, IEC 61850
Data Transfer Rate Up to 1 Gbps full-duplex
Power Distribution 4-channel isolated power output, 24 V DC, 3 A per channel (total max 10 A)
Power Regulation Accuracy ±0.5% of output voltage (24 V DC)
Communication Interface Mark VIe high-speed backplane bus
Operating Temperature Range -40°C to 70°C
Storage Temperature Range -40°C to 85°C
Power Supply Requirement 24 V DC (from Mark VIe backplane, input range: 20 – 28 V DC)
Power Consumption 7.5 W (typical, excluding distributed power)
Dimensions (W x H x D) 64 mm x 178 mm x 229 mm
Weight 1.05 kg
Protection Features Over-voltage protection, over-current protection, short-circuit protection, EMI shielding, surge protection (up to 2 kV)
Certifications CE, UL, cUL, ATEX, IECEx, ISO 9001, FCC, IEEE 802.3 compliant
MTBF (Mean Time Between Failures) 2,100,000 hours

GE IS200EGDMH1AFF

¥999.00

Product Parameters

Parameter Category Specifications
Module Type Industrial Gigabit Ethernet Communication Module
Compatible Platform GE Mark VIe Distributed Control System (DCS)
Network Ports 2 x 10/100/1000 Mbps Gigabit Ethernet ports (RJ45), supporting auto-negotiation
Redundancy Support Built-in network redundancy (Dual LAN, Hot Standby), automatic failover ≤ 50 ms
Supported Protocols Ethernet/IP, Modbus TCP, OPC UA, DNP3, GE SRTP, IEC 61850
Data Transfer Rate Up to 1 Gbps full-duplex
Communication Interface Mark VIe high-speed backplane bus (16-bit parallel bus)
Operating Temperature Range -40°C to 70°C
Storage Temperature Range -40°C to 85°C
Power Supply Requirement 24 V DC (from Mark VIe backplane)
Power Consumption 6.0 W (typical)
Dimensions (W x H x D) 64 mm x 178 mm x 229 mm
Weight 0.93 kg
Protection Features Over-voltage protection, short-circuit protection, EMI shielding, surge protection (up to 2 kV)
Certifications CE, UL, cUL, ATEX, IECEx, ISO 9001, FCC, IEEE 802.3 compliant
MTBF (Mean Time Between Failures) 2,000,000 hours

GE IS200EGDMH1A

¥999.00

Product Parameters

  1. Module Type: Precision generator data monitoring module, exclusive to GE Mark VIe Distributed Control System (DCS)
  2. Channel Configuration: 8 analog input channels (generator sensors) + 16 digital input channels (status interlocks) + 4 digital output channels (control signals), optimized for generator monitoring workflows
  3. Analog Input Specifications: 4-20 mA / ±10 VDC configurable inputs, 16-bit resolution; compatible with speed pickups, voltage transducers, current transformers (CTs), and temperature sensors
  4. Digital Input Specifications: 24 VDC sinking/sourcing inputs, response time < 500 µs; compatible with generator status switches, fault interlocks, and breaker position sensors
  5. Digital Output Specifications: 24 VDC solid-state outputs, 0.5 A per channel, 2 A maximum per module; for activating alarms, auxiliary controls, and maintenance alerts
  6. Generator-Specific Functions: Built-in algorithms for calculating power factor (PF), kilowatt output (kW), reactive power (kVAR), and generator efficiency; supports speed measurement up to 10,000 RPM
  7. DCS Compatibility: Fully compatible with GE Mark VIe controllers, I/O racks (IS200IRTDH1B), backplane power supplies (IS200BPPBH2B), and software (ToolboxST, CIMPLICITY)
  8. Operating Temperature Range: -40°C to 70°C (-40°F to 158°F), resilient to extreme industrial temperature fluctuations
  9. Power Consumption: 3.0 W (typical) at 24 VDC input, 3.7 W (max), energy-efficient for 24/7 continuous generator monitoring
  10. Physical Dimensions: 130 mm × 80 mm × 110 mm (5.12 in × 3.15 in × 4.33 in), rack-mountable in GE Mark VIe standard I/O cabinets
  11. Certifications: UL 508, CE, IEC 61131-2, ATEX (Zone 2), IEEE 1613, and IEC 62443 compliant, meeting global safety and cybersecurity standards
  12. Operating Humidity: 5% – 95% (non-condensing), adaptable to humid generator rooms and offshore power facilities
  13. Protection Features: Built-in ESD protection (±10 kV contact, ±15 kV air), surge protection (±2 kV) for analog inputs, channel-to-channel isolation (250 VAC)
  14. Diagnostic Capabilities: Generator parameter threshold alerts, sensor fault detection, data drift monitoring, and LED status indicators for each channel
  15. MTBF: Exceeds 200,000 hours, ensuring long-term reliability in mission-critical generator applications

GE IS200EDSLH2ABB

¥999.00

Product Parameters

Parameter Category Specifications
Module Type Industrial Digital Signal Isolation & Distribution Module
Compatible Platform GE Mark VIe Distributed Control System (DCS)
Signal Channels 24 bidirectional digital signal channels (12 input isolation channels, 12 output distribution channels)
Signal Type Digital discrete signals (24 V DC, sinking/sourcing configurable)
Isolation Level Channel-to-channel isolation (1000 V AC, 1 minute); Field-to-system isolation (1500 V AC, 1 minute)
Signal Transmission Delay ≤ 2 ms (max)
Distribution Capacity Each input channel can distribute signals to up to 3 output modules via backplane
Communication Interface Mark VIe high-speed backplane bus; supports peer-to-peer signal transfer
Operating Temperature Range -40°C to 70°C
Storage Temperature Range -40°C to 85°C
Power Supply Requirement 24 V DC (from Mark VIe backplane)
Power Consumption 5.0 W (typical)
Dimensions (W x H x D) 64 mm x 178 mm x 229 mm
Weight 0.89 kg
Protection Features Over-voltage protection, short-circuit protection, EMI shielding, reverse polarity protection
Certifications CE, UL, cUL, ATEX, IECEx, ISO 9001, FCC
MTBF (Mean Time Between Failures) 1,900,000 hours

GE IS200EDISG1AAA

¥999.00

Product Parameters

  1. Module Type: Integrated digital input & status monitoring module, exclusive to GE Mark VIe Distributed Control System (DCS)
  2. Channel Configuration: 48 digital input channels, optimized for status monitoring of sensors, switches, and equipment interlocks
  3. Input Specifications: 24 VDC sinking/sourcing inputs, input response time < 500 µs; compatible with proximity sensors, limit switches, safety interlocks, and status indicators
  4. Channel Grouping: Configurable into 6 groups of 8 channels via GE ToolboxST, enabling organized status monitoring of different equipment zones or systems
  5. DCS Compatibility: Fully compatible with GE Mark VIe controllers, I/O racks (IS200IRTDH1B), backplane power supplies (IS200BPPBH2B), and software (ToolboxST, CIMPLICITY)
  6. Operating Temperature Range: -40°C to 70°C (-40°F to 158°F), resilient to extreme industrial temperature fluctuations
  7. Power Consumption: 3.2 W (typical) at 24 VDC input, 3.9 W (max), energy-efficient for 24/7 continuous status monitoring
  8. Physical Dimensions: 130 mm × 80 mm × 110 mm (5.12 in × 3.15 in × 4.33 in), rack-mountable in GE Mark VIe standard I/O cabinets
  9. Certifications: UL 508, CE, IEC 61131-2, ATEX (Zone 2), IEEE 1613, and IEC 62443 compliant, meeting global safety and cybersecurity standards
  10. Operating Humidity: 5% – 95% (non-condensing), adaptable to humid industrial settings
  11. Protection Features: Built-in ESD protection (±10 kV contact, ±15 kV air), surge protection (±2 kV) for inputs, channel-to-channel isolation (250 VAC), and short-circuit protection
  12. Diagnostic Capabilities: Group-level status alerts, channel fault detection, open/short circuit monitoring, and LED indicators for group and module health
  13. MTBF: Exceeds 210,000 hours, ensuring long-term reliability in mission-critical DCS applications
  14. Status Logging: Real-time status data logging with time-stamping, supporting maintenance troubleshooting and operational audit trails

GE IS200EDISG1A

¥999.00

Product Parameters

Parameter Category Specifications
Module Type Industrial Integrated Digital Input/Output (I/O) Module
Compatible Platform GE Mark VIe Distributed Control System (DCS)
Input Channels 16 isolated digital input channels
Output Channels 16 isolated digital output channels (relay type, Form C)
Input Voltage Range 24 V DC (sinking input)
Input Current 5 mA per channel (at 24 V DC)
Output Rating 2 A @ 250 V AC / 2 A @ 30 V DC per channel
Response Time Input: ≤ 1 ms; Output: ≤ 5 ms
Isolation Channel-to-channel isolation (500 V AC, 1 minute); Field-to-system isolation (1000 V AC, 1 minute)
Protection Features Over-current protection, short-circuit protection, surge protection (up to 2 kV), EMI shielding
Communication Interface Mark VIe high-speed backplane bus
Operating Temperature Range -40°C to 70°C
Storage Temperature Range -40°C to 85°C
Power Supply Requirement 24 V DC (from Mark VIe backplane)
Power Consumption 5.3 W (typical)
Dimensions (W x H x D) 64 mm x 178 mm x 229 mm
Weight 0.9 kg
Certifications CE, UL, cUL, ATEX, IECEx, ISO 9001, FCC
MTBF (Mean Time Between Failures) 1,800,000 hours

GE IS200EDFFH1AZZ

¥999.00

Product Parameters

  1. Module Type: Ruggedized digital fault & fire safety module, exclusive to GE Mark VIe Distributed Control System (DCS)
  2. Channel Configuration: 24 digital input channels (safety sensors) + 16 digital output channels (emergency actuators), optimized for fault monitoring and fire safety workflows
  3. Input Specifications: 24 VDC sinking/sourcing inputs, input response time < 300 µs for rapid fault/fire detection; compatible with smoke detectors, heat sensors, flame detectors, and safety interlocks
  4. Output Specifications: 24 VDC solid-state (MOSFET) outputs with fail-safe mode (de-energized on fault), 0.8 A per channel, 6 A maximum per module; short-circuit, overload, and thermal protected
  5. Safety Logic Capabilities: Built-in fail-safe logic, emergency shutdown (ESD) sequence triggering, and cross-channel redundancy for critical safety functions
  6. DCS Compatibility: Fully compatible with GE Mark VIe controllers, I/O racks (IS200IRTDH1B), backplane power supplies (IS200BPPBH2B), and safety software (ToolboxST, CIMPLICITY)
  7. Operating Temperature Range: -40°C to 75°C (-40°F to 167°F), extended range for high-heat safety-critical environments
  8. Power Consumption: 3.5 W (typical) at 24 VDC input, 4.2 W (max), energy-efficient for 24/7 continuous safety monitoring
  9. Physical Dimensions: 130 mm × 80 mm × 110 mm (5.12 in × 3.15 in × 4.33 in), rack-mountable in GE Mark VIe standard I/O cabinets with reinforced mounting brackets
  10. Certifications: UL 508, CE, IEC 61131-2, ATEX (Zone 1/2), IEEE 1613, IEC 62443, and SIL 2 compliant, meeting global safety and cybersecurity standards
  11. Operating Humidity: 5% – 95% (non-condensing), adaptable to humid offshore and high-moisture industrial settings
  12. Protection Features: Enhanced ESD protection (±12 kV contact, ±15 kV air), surge protection (±2.5 kV), channel-to-channel isolation (500 VAC), and fire-resistant component coating
  13. Diagnostic Capabilities: Real-time fault logging, sensor health monitoring, fail-safe mode alerts, and LED status indicators for each safety channel
  14. MTBF: Exceeds 230,000 hours, ensuring long-term reliability in safety-critical DCS applications
  15. Mechanical Durability: Shock resistance (20 g peak) and vibration resistance (6 g rms), compliant with industrial safety ruggedness standards