GE IS200WNPSH1ABA MRP646180 is a WROB relay fuse and power sensing board belonging to GE Speedtronic Mark V/VIe turbine control systems, serving as a core component for power distribution, relay control, and circuit protection in gas/steam turbine architectures. GE IS200WNPSH1ABA MRP646180 integrates 16 fuses and varistors to shield against overcurrent and voltage spikes, ensuring the safety of connected I/O modules and turbine control circuits. GE IS200WNPSH1ABA MRP646180 supports both simplex and triple-modular redundant (TMR) configurations, offering flexible fault-tolerant options for critical power generation applications. GE IS200WNPSH1ABA MRP646180 features a 48-pin backplane connector and JE1/JE2 female plugs, enabling seamless integration with terminal boards like IS200TBcih2c and Mark V/VIe system components. GE IS200WNPSH1ABA MRP646180 also provides real-time diagnostic feedback for power supply status and fuse integrity, simplifying maintenance and reducing unplanned downtime. GE IS200WNPSH1ABA MRP646180’s robust design withstands harsh industrial environments, with compatibility for 120/240V AC primary power and 24V DC control voltage.
GE IC698PSA100E is a high-reliability multi-output power module designed exclusively for GE PACSystems RX7i and Series 90-30 PLCs, serving as the core power supply for backplane modules in industrial automation systems. It delivers stable +5 VDC, +12 VDC, and -12 VDC voltages to support CPUs, I/O modules, and communication components, ensuring uninterrupted system operation. GE IC698PSA100E features a wide input voltage range (85–264 VAC or 100–150 VDC) and 100W total output power, adapting to diverse industrial power environments without additional converters. Equipped with front-panel LED indicators and overcurrent, overvoltage, and short-circuit protection, GE IC698PSA100E enables real-time status monitoring and safeguards connected modules from electrical faults. Its plug-in rack mounting (slot 0 dedicated) and modular design simplify installation and replacement, making GE IC698PSA100E ideal for manufacturing lines, power plants, and process control systems requiring reliable, efficient power distribution in harsh industrial conditions.
GE DS200IQXSG1AAA is an inverter snubber board designed for GE Speedtronic Mark V turbine control systems, dedicated to suppressing voltage spikes and transients in inverter circuits to protect power semiconductors like IGBTs and diodes. GE DS200IQXSG1AAA features 8 terminal connectors (E1 – E8), an 8 – pin interface, and a WIMA FKP – 1 film capacitor for reliable transient absorption. GE DS200IQXSG1AAA integrates seamlessly with Mark V drive assemblies, supporting wind, steam, and gas turbine inverter systems with stable voltage clamping performance. GE DS200IQXSG1AAA’s robust PCB coating and mechanical design ensure durability in high – vibration, high – temperature power generation environments. GE DS200IQXSG1AAA enables easy replacement and maintenance via its standardized mounting and connector layout, reducing downtime during component servicing. GE DS200IQXSG1AAA’s optimized snubber circuit design minimizes power loss while maximizing transient protection, enhancing the overall efficiency of turbine drive systems
GE IS220PSVOH1A is a high-precision servo control module designed exclusively for GE Mark VI/VIe turbine control systems, focusing on servo valve position control and temperature monitoring in industrial automation. It serves as a critical interface between I/O Ethernet networks and TSVO servo terminal boards, processing two servo valve position loops via WSVO servo driver modules to ensure precise actuation of key components like turbine valves. GE IS220PSVOH1A features dual Ethernet ports for redundant communication and supports protocols including Modbus TCP/IP and EtherNet/IP, enabling seamless integration with DCS and SCADA systems without complex configuration. Its front-panel LED indicators (power, Ethernet status, enable signals) and infrared port simplify on-site diagnostics and troubleshooting. With a wide operating temperature range of -40°C to 70°C, 2kV isolation voltage, and IP20 protection, GE IS220PSVOH1A delivers reliable performance in harsh environments such as power plants, oil refineries, and industrial manufacturing facilities requiring stable servo control and real-time data transmission.
GE DS200LDCCH1AGA is a critical logic control chassis housing module for GE Speedtronic Mark VIe turbine control systems, serving as the core carrier for I/O modules and communication interfaces in gas/steam turbine control architectures. GE DS200LDCCH1AGA provides a redundant backplane for hot – swappable module installation, ensuring continuous operation during maintenance or module replacement. GE DS200LDCCH1AGA supports up to 16 I/O modules, with integrated 24V DC power distribution and 1500V AC isolation between channels to protect against industrial noise and voltage surges. GE DS200LDCCH1AGA features a dedicated diagnostic port for real – time health monitoring, enabling predictive maintenance and reducing unplanned downtime. GE DS200LDCCH1AGA’s robust mechanical design and extended temperature range (-40°C to 70°C) make it suitable for harsh power generation environments. GE DS200LDCCH1AGA integrates seamlessly with GE’s Mark VIe control software, supporting deterministic control with cycle times as low as 1ms for precise turbine speed and load regulation.
GE EX2100 is an advanced digital excitation controller designed for synchronous generators, serving as a core component in power generation systems to regulate excitation current and stabilize output voltage. It integrates high-precision control algorithms and dual redundancy design, ensuring reliable operation even in harsh industrial environments with a wide operating temperature range of -40°C to +70°C. GE EX2100 supports multiple communication protocols including Modbus, Ethernet, PROFIBUS, and PROFINET, enabling seamless integration with turbines, DCS, and HMI systems without third-party gateways. Its intuitive LCD display and flexible programming modes (manual/auto) simplify on-site configuration and monitoring, while comprehensive protection functions (overvoltage, overcurrent, overtemperature) safeguard generators and excitation systems. GE EX2100 features a compact modular design (120mm×80mm×40mm) with IP65 protection, suitable for both new generator installations and legacy system retrofits. With a maximum output current of 400A and output voltage up to 1200VDC, GE EX2100 excels in traditional power plants, renewable energy systems, and industrial power facilities requiring efficient and stable power generation.
GE IC697MDL740 is a 16 – point DC discrete output module for GE Fanuc Series 90-70 PLC systems, engineered to drive inductive and resistive loads like contactors, solenoids, and indicator lights. GE IC697MDL740 uses a 4 – group × 4 – point isolated design with individual 10A fuses per group, ensuring fault containment and protection for connected devices. GE IC697MDL740 supports 20-60V DC input, with 2A per – point and 4A per – group continuous current capacity, plus 20A surge current for 20ms to handle inrush loads. GE IC697MDL740 integrates LED status indicators for each output and fuse health, enabling quick troubleshooting without extra tools. GE IC697MDL740 features mechanical keying to prevent incorrect installation and 1500V AC isolation between outputs and backplane, enhancing system reliability in harsh industrial settings. GE IC697MDL740’s fast 2ms on/off response time makes it ideal for high – speed automation processes.
GE IC600CB527M is a dedicated I/O interface module for GE Series Six PLCs, acting as a critical communication bridge between the CPU, main I/O chain, and peripheral devices like Program Development Terminals (PDT) and Data Processing Units (DPU). It features two 37-pin D-sub connectors for secure connections to I/O receiver modules and external peripherals, ensuring stable data transmission in industrial environments. GE IC600CB527M is equipped with four LED status indicators that display key operational data such as I/O chain parity and continuity, enabling quick on-site troubleshooting. Its jumper-configurable design supports flexible function customization, allowing seamless integration with other GE PLC modules for data sharing and system expansion. With IP65 protection, low power consumption, and compatibility with diverse industrial signals (AC/DC, digital/analog), GE IC600CB527M excels in power plants, manufacturing lines, and process control systems requiring reliable CPU-I/O-peripheral communication.
GE IC200PWR101D is a dedicated AC – input power supply module for GE Fanuc VersaMax PLC systems, providing stable 5V DC and 3.3V DC backplane power for CPUs, I/O modules, and network interfaces. GE IC200PWR101D supports universal 120/240V AC input with jumper – selectable ranges, making it adaptable to global power grids. GE IC200PWR101D serves as both a primary power source for the rack and a secondary source when paired with a GE IC200PWB001D booster carrier, enhancing power capacity for expanded I/O configurations. GE IC200PWR101D integrates overload, short – circuit, and over – current protection, automatically shutting down during faults to safeguard connected modules. GE IC200PWR101D has a compact form – factor that fits seamlessly into VersaMax racks, and its 20ms holdup time ensures uninterrupted operation during brief power dips.
GE IS200HSLAH2ADE is a high-speed serial link interface board specifically designed for GE Mark V, Mark VI, and Mark VIe turbine control systems, serving as a critical communication hub for real-time data exchange. It enables rapid and reliable transmission between central controllers (e.g., UCSB controllers) and distributed I/O modules, sensors, and turbine-specific components, ensuring timely delivery of process data and control commands. GE IS200HSLAH2ADE supports differential input signals and integrates seamlessly with HS series high-speed servo drives and SLR series safety relays, while its modular design simplifies installation, replacement, and system expansion. With built-in redundancy and fault diagnostic capabilities, GE IS200HSLAH2ADE enhances system reliability, making it ideal for power generation, oil and gas, and petrochemical applications where uninterrupted communication is vital. Its rugged construction meets industrial standards, allowing GE IS200HSLAH2ADE to operate stably in harsh environments with varying temperatures and electromagnetic interference.
GE 531X309SPCAJG1 is a digital signal processing card designed for industrial drive control systems, acting as a critical interface between sensors, encoders, and SDCC drive control cards. GE 531X309SPCAJG1 processes current/voltage reference signals and RS – 422 serial data, converting them into drive – compatible voltage references to ensure precise motor control and speed feedback. GE 531X309SPCAJG1 integrates seamlessly with GE’s 531X series control platforms and third – party drive systems, supporting easy configuration via switches, jumpers, and potentiometers. GE 531X309SPCAJG1 adopts a redundant dual – bus design and industrial – grade components, providing reliable operation in high – EMI and temperature – variable environments. GE 531X309SPCAJG1 features a plug – in modular structure, enabling quick replacement and hot – swapping without system shutdown, thus reducing maintenance downtime.
GE UR6DH is a high-reliability digital I/O module belonging to GE Multilin’s Universal Relay series, designed for industrial automation control, power system monitoring, and auxiliary device management. It integrates 16 contact inputs and versatile output configurations, supporting 24–48VDC power supply to adapt to diverse industrial power requirements. GE UR6DH features programmable logic and serial communication interfaces (RS-232, RS-485) along with industrial protocols like Modbus TCP/IP, Ethernet/IP, and PROFINET IO, enabling seamless integration with universal relays, PLCs, and DCS systems without complex hardwiring. Its 2,500VDC channel isolation enhances safety in high-voltage environments, while fail-safe operation ensures system integrity during unexpected disruptions. GE UR6DH adopts a compact modular design (100mm×100mm×25mm) for DIN rail mounting, simplifying installation and expansion in control panels. With a wide operating temperature range of -40°C to +70°C and compliance with industrial EMC standards, GE UR6DH excels in power distribution, substation automation, and manufacturing applications requiring robust and flexible I/O control.
