-Output Type: Discrete DC Output
-Output Points: Typically 16 output channels
-Voltage: 24VDC
-Current: Capable of handling up to 0.5A per point
-Isolation: 4 groups of isolation
-Dimensions: 132mm x 105mm x 52mm (W x H x D)
-Weight: Approximately 2KG
-Voltage Range: Depending on the specific model or application, the 140XTS00200 may support a range of voltages, such as 24V DC or 220V AC12.
-Output Frequency: In some cases, the output frequency may range from 25-75Hz or 47-63Hz32.
-Brand: Schneider Electric12.
-Model: 140XTS0020012.
-Type: May be a software product, an independent processor, or a PLC module31.
-Power Consumption: At 3.3V DC, it consumes 600mA, and at 5V DC, it consumes 240mA
-Operating Voltage: Compatible with 3.3V and 5V DC for internal power
Specifications:
-Slot Configuration: Designed as a 12-slot universal backplane
-Communication Support: Facilitates both PCI and high-speed serial bus connections
-Dimensions: Measures 18.01 x 5.57 x 5.80 inches (457.5 x 141.5 x 147.32 mm)
Number of analog input channels: 8.
Analog input range: -10V to +10V.
Number of analog output channels: 4.
Analog output range: 0V to +10V.
Resolution: 16 bits.
Input voltage range: 12-48VDC (may vary depending on the model or application scenario).
Output voltage range: 5VDC (maximum output current 10A, efficiency greater than 90%).
Accuracy: The input simulation accuracy can reach ±0.1%, and the analog output accuracy can reach ±0.2%.
Communication protocols: Support a variety of communication protocols, including TCP/IP, UDP/IP, Modbus TCP/IP, EtherNet/IP, PROFINET, PROFIBUS DP, CANopen, Modbus RTU, etc.
Transmission rate: Depending on the communication protocol, the transmission rate varies, such as PROFIBUS DP can reach 960 kbps to 6 Mbps, CANopen can reach 125 kbps to 1 Mbps, Modbus RTU can reach 9600 bps to 115200 bps.
Number of nodes: The maximum number of nodes supported also varies according to the communication protocol, such as PROFIBUS DP maximum 31 nodes, CANopen maximum 127 nodes, Modbus RTU maximum 255 nodes.
Power supply: Usually 24 VDC.
Power consumption: 2 W.
Number of channels: When used as a digital input module, the number of channels may be 16.
Input voltage range: 12-48VDC.
Output voltage range: 5VDC.
Output current: Max. 10A.
Efficiency: greater than 90%.
Operating temperature: -20°C to +50°C.
Storage temperature: -40°C to +70°C.
Ambient humidity: 5% to 95% relative humidity (no condensation).
CPU: 32-bit RISC processor.
Brand: Rexroth
Model: KSM01.2B-071C-35N-M1-HP0-SE-NN-FW
Use: pressure control valve, working principle is solenoid valve
Operating temperature: 50℃
Working pressure: 220mpa
Interface size: 50
Flow rate: 40CV
Part number: IS200VCRCH1B.
Working voltage: 220V.
Output frequency: While direct output frequency information about the IS200VCRCH1B is not provided, some GE products may support high-frequency operation, such as 350kHzHz. However, this frequency may not be directly related to the specific application of IS200VCRCH1B.
Function: Discrete input/output board that controls 24 relay outputs and accepts 48 discrete inputs from four terminal boards.
Mount: Mount into the VME I/O rack, which has two sets of plugs for connecting to the terminal board.
Operating voltage: May vary depending on the specific model or configuration, but some information mentioned that the ELOP II operates at 24V, while other DCS/PLC system modules may operate at 220V.
Current: The ELOP II’s drive current is adjustable in 8 gears from 2.0A/ phase to 6.0A/ phase.
Output frequency: standard kHz.
System memory: at least 512MB.
Function: ELOP II may be a programmable electronic system (PES) programming software or related hardware module for industrial automation control.
Operating environment: normal temperature.
System capability: Normal.
Size and weight
Size: 236*124mm
Power Supply: 24VAC or 24VDC, typical power consumption 15 watts, maximum power consumption 25 watts.
Current: The current range may vary according to the specific application, there is a current value of 100-400A mentioned, but it should be noted that this may be confused with other products.
Storage capacity: 2 GB of non-volatile flash.
Point capacity: Maximum support 30,720 points.
Operating system: PLC system.
System function: Automatic.
System environment: normal temperature.
System capability: Powerful.
Motor power range: 0.12~ 200kW.
Torque range: 85~18000 nm.
Ratio range: 5~28000.
Input speed range: 750 to 3000 rpm.
Output speed range: 0.05~500 rpm.
Ambient temperature range: -20°C to +40°C.
Support system: PLC.
Control principle: DCS.
Program capacity: 8K steps.
System capability: Powerful.
Measuring range: 2.0KN (kN)
Measurement accuracy:
Battery powered: ±0.5%
AC220V power supply: ±0.25%
Supply voltage: 24V (some information may also include other supply options, such as AC220V)
Current: 100-400A (This current range may be suitable for specific application scenarios or device models, further confirmation is required)