NI SCXI-1162HV
¥16,529.00The NI SCXI – 1162HV is a 32 – channel, isolated AC/DC digital input module2. It has 32 channels of optically – isolated digital inputs, which are organized into eight separate banks of four input lines each
GE IC695RMX128
¥16,529.00- User Memory: 128MB SDRAM
- Redundant Configuration: Supports dedicated link operation between RX3i CPUs configured as reflective memory network or redundancy
- Fiber Network: Equipped with LC-type single-mode fiber supporting up to 2.12 Gbaud
- Node Connectivity: Establishes connectivity via fiber network, supporting up to 256 nodes
- Power Requirements: Operates at 580mA @ 3.3V DC and 220mA @ 5V DC
ABB UAC383AE01
¥16,529.00- Control Principle: Integrated signal acquisition, intelligent communication, data transmission, and network access
- Interfaces:
- Two RS232/485 serial communication interfaces
- One Ethernet port
- One GSM/GPRS wireless communication port
- One USB port
- 8 controllable analog acquisition ports
- 2 switch acquisition ports
- 3 controllable power output ports
ProSoft MVI69E-MBS
¥21,051.00Parameters and Specifications:
- Supported Protocols: Modbus RTU, Modbus ASCII, DF1, ASCII, and others
- I/O Size: Available in 60/120/240 – 16-bit integer
- Communication Parameters:
- Baud Rate: 110 to 115K
- Stop Bits: 1 or 2
- Data Size: 7 or 8 bits
- Parity: None, Even, Odd
- RTS Timing Delay: 0 to 65535 ms
NI NI-9505
¥16,529.00The NI NI-9505 is a full H – bridge brushed DC servo drive module for the CompactRIO platform1. It offers a compact and powerful solution for controlling brushed DC servo motors
HONEYWELL FC-SAI-1620M
¥18,452.00The Honeywell FC – SAI – 1620M is a high – density analog input module designed for safety – critical applications. It provides 16 input channels, each capable of handling voltages up to ± 36 VDC
ABB DSMB-01C
¥24,157.00Parameters and specifications:
Number of channels: 4
Input type: Security sensor
Output type: Safety relay
Safety function: emergency stop, interlock, safety limit
Power supply voltage: 24 VDC
Power consumption: 5W (or depending on the specific model)
ABB EHDB280
¥15,248.00Features:
- High Performance: The EHDB280 is a high-performance CPU module for ABB’s automation and control systems
- Flexibility: It provides flexibility and scalability for various automation applications
- Connectivity: Supports various communication protocols and interfaces for integration with other systems
ABB YPP110A
¥18,524.00Features:
- Application: It is a high-performance controller module produced by ABB Group, mainly used in generators and generator sets in power systems, as well as in industrial automation and other scenarios requiring motor excitation control
- Control Methods: It supports V/f control, sensor-less vector control, and closed-loop vector control
- Communication: Supports Modbus, CANopen, and DeviceNet communication protocols
GE IC754VSI12CTD-HH
¥15,248.00Specifications & Parameters:
- Screen Size: 12 inches
- Resolution: 1024 x 768
- Processor: 1GHz ARM Cortex-A8
- Operating System: Windows CE 6.0
- Storage Capacity: 128 MB
- Working Voltage: 24V DC
- Communication Interfaces: RS232, RS485, Ethernet
SCHNEIDER 490NRP25400
¥24,016.00The Schneider 490NRP25400 is a fiber optic repeater designed for seamless integration into industrial control systems
REXROTH DKC02.3-100-7-FW
¥24,015.00The REXROTH DKC02.3-100-7-FW is an AC servo drive controller in the DKC series1. It is a versatile and dependable drive controller well – suited for a variety of industrial applications4. This unit features a rated current of 100 A and a DC bus nominal voltage of 700 V