Digital output: 8 channels (some information says 24 channels, but based on other information, this may be related to a specific application or configuration)
Input voltage: AC 380/220V 50Hz three-phase four-wire.
Power: 20KVA 1*3 only or rated total capacity: 36KVA.
Output current: AC0 ~ 2000A stepless adjustable, panel with digital ammeter.
Output voltage: >6V.
Output waveform: standard sine wave, small burr, better than the power system requirements of the index standard, ripple coefficient is less than 0.3%.
Measurement accuracy: actually about 0.3, the accuracy is higher than 0.5.
Current stability: 0.2%.
Protection Settings: overcurrent, overvoltage.
Insulation voltage: 1800/AC 1min, insulation class: Class B.
Interface type: RS-232 is a DB9 female connector, RS-485 is a DB9 male connector or a 3-bit industrial connector.
Power specifications: No external power supply is required, the device obtains power from TXD, RTS, DTR signals of RS-232 port; Power consumption: static power consumption within 10mA, dynamic power consumption within 40mA on average.
Transmission distance: 1200 meters (9600bps) at the RS-485 end, and no more than 5 meters at the RS-232 end is recommended.
Input/Output function: The module has multiple input and output channels that can be used to connect sensors, actuators and other external devices to achieve data input and output. Supports a variety of interface types, including digital input, digital output, analog input, analog output, etc., to adapt to different types of signal and device connections.
High reliability and stability: As an industrial automation equipment, 1C31219G01 usually has high reliability and stability, and can operate stably in harsh industrial environments for a long time.
High-speed data transmission: The module has high-speed data transmission capability, which can collect and transmit data in real time to meet the needs of fast response and high frequency control.
Flexible configuration and programming: Supports flexible configuration and programming, which can be customized and adjusted according to specific application requirements to achieve flexible control and data processing functions.
Monitoring and diagnosis: Provides monitoring and diagnosis functions for real-time device status monitoring, fault diagnosis, and troubleshooting to improve system reliability and maintenance efficiency.
Input voltage: Depending on the search results, there are several possibilities. For example, some mention that the input voltage is 24VDC, and some mention that the power supply is 24VDC ±10% 50/60Hz,8W.
Output: 4-20mA DC.
Accuracy: Depending on the search results, there are two possible accuracy, ±0.25% and ±0.1%.
Temperature range: there are also many possibilities, such as -40 °C to 85 °C, -200°C to +600°C, 0°C to +50 °C.
Waterproof class: IP65.
Communication interfaces such as RS485 and Modbus.
