Interface type: ARCNET
Interface speed: 2.5 Mbps
Node address: Configurable
Bus topology: Supports star, bus, or ring
Power supply voltage: 5 V DC
Power consumption: Max. 5 W
Operating temperature range: -40°C to 85°C
Storage temperature range: -55°C to 125°C
Humidity: 5% to 95% (non-condensing)
Protection level: IP67
Widely used: suitable for automated control systems, may be part of DCS system card, PLC, etc
Power supply and voltage adaptability: Supports different operating voltages and power supply configurations
Full function: with speed regulation, control and other functions
Openness: May have an open design feature for easy integration and expansion
Operating voltage: Depending on the description of different vendors and products, the operating voltage may be 220V2 or 110V
Output frequency: In some descriptions, the output frequency is 350kHz
Processor: Unity CPU486 processor, 66MHz
Memory: 2M SRAM
Power Supply: Multiple power configurations may be supported, such as the Quantum power supply series
Output points: 8 isolated points
Operating temperature range: -40℃ ~ +85℃
Output current range: 4~20mA
Resolution: 12 bits
Output accuracy: less than 0.25%
Rated voltage: 24 volts DC
Backplane voltage range: 18 to 32 volts DC
Output voltage range: 18 to 32 volts DC
Number of output channels: 8
Dual scan time: 1.174 ms and 2.202 ms are supported
Rated power consumption: 3 watts
Heat dissipation power: 10.2 BTU per hour
Model: SR511
Part number: 3BSE000863R0001
Input voltage: 110-240V AC
Output voltage: 24V DC (24V/5V mentioned in some information, but mainly 24V DC)
Operating temperature: -10°C to 60°C
specification
Product specifications: including input voltage, output voltage and operating temperature
Applications: Widely used in manufacturing, power generation, chemical processing, oil and gas, water and wastewater treatment and other fields
Dimensions: 220 x 140 x 80 mm
Weight: 3.5 kg
Rated power: 2.2kW
Rated voltage: AC 380V
Rated current: 5.8A
Frequency range: 0.5 Hz to 150 Hz
Output voltage accuracy: ±1%
Control mode: V/F control, servo control, PID control, etc
Input voltage: DC 24V
Power consumption: About 4.5 watts Max
Input signal: digital signal or analog signal
Output signal: digital signal or analog signal
Operating temperature: -40℃ to +70℃
Protection level: IP20
Specifications and dimensions
Size: 554mm*41.5mm * 440.4mm(W×H×D)
Weight: Approx. 1.7 kg 1 or 2KG
Size: 89mm x 45mm x 110mm
Installation: DIN rail installation for easy installation in the control cabinet
Outputs: There are 16 outputs, each of which is a normally open (NO) relay contact, rated 5A at 250V AC or 30V DC
Input signals: Designed to handle a variety of input signals, including 24V DC, 120V AC and 240V AC
Power supply: Not directly mentioned, but commonly used in industrial automation and control systems
Function: SDSS-PIN-51-COAT is a control board or governor board from ABB that may be used for tension control or other industrial automation applications.
Common faults include: no display, no phase, over current, over voltage, under voltage, overheat, overload, grounding, parameter error, display no output, module damage, error report, etc
Sdss-pin-51-coat may be used for tension control or other control tasks in industrial automation control systems, such as wires, cables and other situations where tension accuracy is not required
Model: DSQC668 3HAC029157-001
Voltage: 24V
Current: 100-400A
Output frequency: 50HZ
Country of Origin: Malaysia (MY)
Net weight: 0.58kg
Net length: 269mm
Product height: 27 mm
Product net width: 147 mm
Power supply: Provides +5 VDC, +12 VDC, and -12 VDC power supplies, as well as logical level sequence signals
Power output: One AC input line cycle may be lost, but the output power is not actually lost
Protection: Overcurrent, overheat and overvoltage fault conditions are protected
Operating temperature: 0 to 60°C (no forced air cooling)
Output power: Allows 100 watts of total output power
Output voltage: +5 VDC output up to 20 amps, +12 VDC output up to 2 amps, -12 VDC output up to 1 amp
Measuring range: × 1 (0-1999 W/m2); × 10 (2000 – 19990 w / m2, display value multiplied by 10)
CPU type: Intel Celeron (Pentium III) microprocessor
Memory: 10 MB RAM
Flash memory: 10 MB
Serial ports: RS-232 and RS-485
Communication protocols: Support Modbus RTU Slave, SNP, and Serial I/O protocols
Block support: Up to 512 blocks, each block with a maximum size of 128 KB
Programming language: ladder diagram, structured text, functional block diagram or C language
Technical specifications: 1.25 amp rated current at 3.3 volts DC, 1 amp running at 5 volts DC
Operating temperature range: 0 to 60 degrees Celsius