specification
Programming languages: Support a variety of programming languages, including Ladder Logic, Function Block diagrams, and Structured Text, for easy programming and debugging.
Diagnostic function: With rich diagnostic functions, it can monitor the running status of the module in real time, and discover and solve problems in time.
Size and weight
Size: For PLC modules, the size may be 105 x 70 x 30 mm;
argument
Communication protocol: Support Profibus DP bus standard.
Communication rate: Supports a variety of rates, including 9.6Kbps, 19.2Kbps, 45.45Kbps, 93.75Kbps, 187.5Kbps, 500Kbps, 1.5Mbps, 6Mbps, 12Mbps, etc.
Optical fiber wavelength: multi-mode 850nm, 1310nm; Single mode 1310nm, 1550nm.
Transmission distance: multi-mode up to 2km, single mode up to 20km, more distance optional.
Power supply: Dual power supply redundant input, DC(9-36)V, typical DC24V, power consumption less than 4W, with DC1500V voltage isolation and reverse protection function.
argument
Operating power supply: Usually 24VDC, but other voltage ranges may be supported.
Input voltage: An input voltage range of 110-240V May be supported in some applications.
Output voltage: There may be multiple output channels, each with different output voltage and current capabilities, for example, the output current can reach 0-5A and the output voltage can reach 100V in some applications
Output power: 40W is mentioned in some applications.
Frequency range: 47-63 Hz.
argument
Processor: AMD SC250 or AMD SC520 (different terms exist), built-in microprocessor, embedded 586 processor.
Processing speed: 133 MHz.
Typical scan rate: 0.15 ms per 1K logic.
User memory: 240 KB, configurable.
I/O points: 2048 fixed discrete input and output points.
Discrete global storage capacity: 1280 bits.
Register memory: can be configured from 128 to 32640 words.
System registers: 28 fixed system registers with timers and counters.
argument
Power input: Support 85 to 264 VAC (nominal voltage 120/240 VAC) and 100 to 150 VDC (nominal voltage 125 VDC) at 47 to 63 Hz.
Maximum output power: 100 watts, total power distributed in three output terminals.
Output voltage:
+5 VDC: 4.875 to 5.25 volts, 0-20 amps.
+12 VDC: 11.64 to 12.6 volts, 0-2 amps.
-12 VDC: -12.60 to -11.64 volts, 0-1 amps.
specification
Bus system: Based on VME bus system.
Architecture: The PowerPlus II architecture, combined with a highly optimized PCI interface and memory controller, enables memory read bandwidth of up to 582MB and burst write bandwidth of 640MB.
Operating system support: Supports multiple operating systems, such as VxWorks and Linux.
Programming language support: Support a variety of programming languages, such as C/C++, assembly language, etc.
Size and weight
Dimensions: 233 mm x 160 mm x 40 mm.
Weight: Mentioned in some sources as 2 kg, but in others as 1.36 kg,
argument
Voltage: 24V
Current: 100-400A
Memory card slots: 2 (SD card optional)
Panel protection level: 3
Number of server connections: Type 3
PLC type support: PLC2, PLC5, SLC, CLX, CMPLX, MICROLX
Number of client connections: Two type 3 clients are connected and one is not connected
Number of I/O connections: The number of Class 1 I/O connections is 2
argument
Type: Automatic Control Module/Analog-to-Digital Converter (ADC)
Manufacturer: ABB
Model: XVC769AE101 3BHE006373R0101
specification
High precision and reliability: The use of high-precision conversion algorithms and high-quality components to ensure the accuracy of the conversion results.
Powerful functions: With powerful signal processing capabilities, it is able to receive analog signals from various sensors and convert them into digital signals.
Multiple interfaces and communication protocols: With standard interfaces and communication protocols, support a variety of communication protocols, such as Ethernet, Modbus, Profibus, etc., can be easily integrated with other devices and systems.
High-performance processors: Typically equipped with high-performance processors, capable of handling complex control algorithms and real-time data.
Flexible configuration: Users can customize control logic, set parameters, and modify configurations using programming software.
argument
As a system power module:
Stability: High quality electronic components and advanced circuit design ensure stable power output under various operating conditions.
Reliability: After strict quality control and testing, it can operate stably in a variety of harsh environments for a long time.
Efficiency: Use efficient power conversion technology to reduce energy consumption and improve the overall efficiency of the system.
Safety: With a variety of safety protection functions, such as over current protection, over voltage protection, overheating protection.
argument
Power supply voltage: 24V DC
Rated current: 5A
Maximum current: 10A
Output power: According to different sources, there are two versions of 120W and 360W
Control mode: analog/pulse
Response frequency: 500Hz
Accuracy: ±0.05%FS
Reliability: MTBF>10000 hours
Display:
Display: 17″ SXGA TFT LCD, resolution 1280×1024, brightness 300cd/m2.
Touch screen: Industrial eight-wire resistive touch screen, resolution 4096×4096.
Interface:
USB: Six USB2.0 ports.
Serial port: 4 RS232 ports.
Parallel port: One parallel port, supporting SPP/EPP/ECP modes.
Network port: 1/2 RJ45 ports of 10 to 100M are optional.
Audio: LINE-out, MIC-in.
PS/ 2:1 PS/2 keyboard and 1 PS/2 mouse.
Expansion slot: One PCI expansion slot.
Power supply: 100V~240V AC voltage input.
argument
Operating voltage: According to the search results, the BCU-02 series of control units usually require an external 24V DC power supply.
Output frequency: The output frequency of different control units may vary, but is generally related to the device or system under control.
Storage capacity: The BCU-02 series control unit features an integrated SD card slot for collecting and storing real-time data from the converter module.
specification
Brand: ABB
Model: BCU-02 3AUA0000110429
Product type: Control unit