Voltage: Depending on the search results, there are two possibilities mentioned: 24V and 220V, which may be due to differences between different models or versions.
Current: A current range of 100-400A is mentioned in some search results, but this information may vary depending on the specific model.
argument
Processor: Freescale 8349,667 MHz.
Operating system: QNX operating system.
Power supply specification: Rated voltage is 18~36V DC, power is 12 watts.
Operating temperature: between 0 and 65 degrees Celsius.
Cooling method: Natural cooling, no fan required.
Communication interface: Includes Ethernet interface to support communication with other MKVI, MKVIe, or EX2100 excitation controllers as well as maintenance and operator stations.
specification
Application: Mainly used for gas turbine or steam turbine control, is part of the Mark VI system.
Front panel ports: Includes six female jack connectors, a USB port, and multiple LED indicators.
Size and weight
Height: 34mm.
Door thickness: 33mm.
Weight: About 0.7 kg
Voltage range: usually not more than 1000V, it is said that the voltage is 24V.
Current: There are claims that the current range is 100-400A, but please note that this current range may not be a direct parameter of the SPBRC410, but rather a parameter of the application or system associated with it.
specification
Type: Automation and electrical PLC control products.
Central unit: Provides Modbus TCP interfaces.
Size and weight
Size:
Net depth/length: 101.6mm
Net height: 203.2mm
Net width: 254mm
Estimated shipping size (another source) : 2.5cm x 17.8cm x 30.5cm (i.e. 1″ x 7″ x 12″)
Weight:
Net weight: 0kg (but may include small button batteries, weighing 5 grams)
Some say that the weight is 0.13kg, and others say that the weight is 2KG.
Number of analog input channels: 64 differential or single-ended
Scanning rate:
High performance options: 381 Hz to 100 kHz
Standard performance options: 381 Hz to 50 kHz
Gain: Programmable gain, x1 or x10
A/D converter range: ± 2.5V, ± 5V, ± 10V, 0 to + 5V, 0 to + 10V
Dual port data buffer: 16 to 1,024 words
specification
Operation mode: Supports automatic scanning, data burst, and external synchronization
Data space: Can operate in short I/O (A16), standard (A24), or extended (A32) data space
Programmable channel block size and buffer size: Channel blocks can be adjusted to 1, 8, 16, 32, or 64 channels, and data buffer sizes can be selected in binary increments from 16 data words to 1,024 data words
Interface: Each module has a triple I/O security bus interface.
Fault detection and diagnosis: Has a wide range of fault detection and diagnosis functions to prevent the controller from receiving incorrect data from the fault input module.
Programming and diagnostic capabilities: All five IEC 61131-3 programming languages are supported, and the I/O module includes HART and line monitoring capabilities for enhanced field device diagnostics.
Technical parameters: There may be a specific analog input I/O number (such as 4 channels 0 to 10V), operating voltage (such as 24VDC), processing speed, ambient temperature and humidity range, but the specific parameters may vary by application or version.
specification
Type: Industrial controller module.
Series: T8 series.
Brand: ICS TRIPLEX.
Size and weight
Size: Usually follows the original factory standard.
argument
Voltage: DC20-50V, also said to be 24Vdc/120Vac
Current: 100-400A (This range may vary depending on the application or configuration, please refer to the product manual)
specification
Type: May be a stepper driver, PLC module card controller or network processor module, depending on its application scenario
Communication protocol: Support RS-485 bus and MODBUS-RTU protocol, can achieve remote reliable control
Built-in function: Built-in single-axis controller function, support position control and speed control two modes, the user can set the current, subdivision and lock the current size and other parameters through the bus
dimension
Volume: 118mmx76mmx33mm
Specification: Another claim is 101623 (may be a different model or configuration size)
weight
Net weight: 0.3kg (this is based on stepper drive data)
Weight: It is also said to be 1KG or 2KG
