Model: PM511V08, part number: 3BSE011180R11.
Mainly used in industrial automation systems for process control and monitor1.
It is an analog communication module, which is often used for analog signal exchange and communication with sensors, actuators and other equipment.
Weight :
Different sources give different weight information. One source says it weighs 2KG3, while another says it weighs 0.2kg4. The exact weight may vary from batch to batch or configuration.
function :
It is mainly used for the acquisition and communication of analog signals to realize the automation and intelligence of industrial production process2.
Supports a variety of communication interfaces, such as serial ports, Ethernet, etc., and can exchange data with other devices and systems2.
High precision, stability and reliability for harsh environments2.
Specifications: The specifications of the 3BSE018161R1 would typically include its operational parameters, such as voltage and current ratings, frequency response, power handling capability, and environmental conditions under which it can operate reliably. These specifications ensure that the component meets certain performance standards and is suitable for its intended application.
Weight: Without precise details, the weight of the 3BSE018161R1 cannot be accurately stated. However, if it’s an electronic component, its weight would likely be relatively light, ranging from a few grams to possibly tens of grams, depending on its size and construction materials.
Function/Purpose: The primary function of the 3BSE018161R1 would be determined by its design and application. It could serve as a sensor, controller, transducer, or some other specialized electronic component, performing tasks such as signal conversion, data processing, or system control within a larger electronic system or device.
PP846A1 is designed to meet specific performance criteria, tailored for its intended application.
It incorporates advanced materials and manufacturing processes to ensure reliability and durability.
Weight:
The weight of the PP846A1 can vary depending on the exact composition and design. Without specific details, a typical range might be between 50 to 200 grams, but this can significantly differ based on actual construction and materials used.
Function/Purpose:
PP846A1 serves a defined purpose within its application, which could range from being a structural component, an electronic part, or a specialized tool. Its function is to enhance or enable specific operations within a system or device.
Weight: Manufacturer’s specifications required for exact weight.
Dimensions: Precise measurements available in product manual.
Parameters & Specifications:
Storage Capacity: Adequate for program storage and execution.
I/O Points: Vary by model, accommodating diverse automation needs.
Communication Protocols: Supports standard protocols for system integration.
Technical Details: Voltage range, power consumption, environmental ratings in official documentation.
Used for various industrial applications such as signal control, valve control, pump control, and alarm systems.
Parameters:
Input Voltage: 100-240V AC.
Output Voltage: 24V DC.
Maximum Output Current: 2A.
Operating Temperature Range: -40°C to 85°C.
Dimensions: 110mm x 80mm x 30mm.
Up to 10 MB of battery-operated RAM is available for program storage.
The typical Boolean execution speed is 0.195 milliseconds per 100 Boolean contacts or coils.
Two embedded serial communication ports are available, namely RS-232 and RS-485.
Multiple serial communication protocols are supported, such as Modbus RTU slave, SNP and serial I/O protocols.
Dimensions and weights : Dimensions and weights are not found in Resources. You are advised to consult the official specification documentation or contact the manufacturer for accurate data.
The exact weight of the IS420ESWBH1A is not provided in the available information. Industrial sensors and switches can vary widely in weight depending on their construction, materials, and intended application.
Function:
The primary function of the IS420ESWBH1A is to monitor or control specific industrial processes or equipment. It may be used to detect changes in temperature, pressure, flow, level, or other parameters critical to the operation of machinery or systems. Its output signals can be used to trigger alarms, activate safety mechanisms, or adjust process variables as needed.
Specifications: Not specified in detail, but it is an automation industrial control accessory.
Weight: 0.3kg, indicating its lightweight design for ease of use and installation.
Function: Acts as a power module, converting input voltage to a specified output voltage for various applications.
Parame ters:
Input Voltage: 24VDC, 48VDC
Output Voltage: 24VDC
Maximum Output Current: 10A
Operating Temperature Range: -40℃ to +85℃
Dimensions: 100mm x 50mm x 20mm, providing a compact size for easy integration into systems.
Part Number: IS215VCMIH2B
Manufacturer: General Electric (GE)
Country of Manufacture: United States (USA)
Product Type: VME Bus Master Controller
Series: Mark VI
Weight:
The weight of the IS215VCMIH2B is not explicitly mentioned but the weight of a similar product is 0.53. It may vary based on specific configurations or versions.
Function:
The IS215VCMIH2B serves as a communication interface card for gas turbine control systems, part of the Mark VI series. It acts as a bridge between the controller and I/O boards, as well as the IONet system control network.
Onboard DSP : TI TMS320C6711, operating frequency is 200 MHz1.
Maximum number of controllable axes : 6 axes 1.
multi-axis interpolation and arbitrary 2-axis arc interpolation : supports continuous motion with smoothing function and sequential motion control of time series graphs of interaxial velocity variations1.
encoder feedback : 3 channels, 32-bit, up to 5MHz increment/decrement counter 1.
Analog output (D/A) : 16-bit resolution, output channel 2 single short channels, output range ±10 V, bipolar, set time 10 μs
Universal I/O : consists of 2 channels isolated digital input and 2 channels open collector output 1.
