FBM233 P0926GX
¥6,235.00Size and weight
Size:
5.1 cm x 12.7 cm x 11.4 cm
36*42mm
Weight:
0.3 kg
0.36 kg
series
The FBM233 P0926GX belongs to the FOXBORO family and is commonly used in industrial automation and control systems.
REM610
¥4,629.00Parameters and specifications
Protection function:
Three-phase thermal overload protection
Three-phase motor start-up Monitoring (based on thermal stress calculation)
Three-phase overcurrent protection (with timing feature and speed switch lockout)
Three-phase short-circuit protection (with instantaneous or timing characteristics)
Non-directional ground fault protection (with timing characteristics)
Three phase unbalance protection based on negative phase sequence current
Inverse phase protection based on negative phase sequence current
Cumulative start time counter (with restart suppression)
Circuit breaker fault protection
Temperature protection for timing characteristics
PTQ-PDPMV1
¥5,269.00Parameters and specifications
Digital input/output channels: there are 4 digital input channels and 4 digital output channels.
Backplane current load: 5 volts DC ±5% Max 1100 MA.
Operating voltage: Input voltage range is 110-240V.
Operating temperature: 32 ° F to 140 ° F (0°C to 60 °C), or -40°C to +85°C.
Storage temperature: -40 ° F to 185 ° F (-40 ° C to 85 ° C), consistent with the low temperature end of the above operating temperature.
Relative humidity: 5% to 95% (non-condensing).
Frequency range: 47-63 Hz.
Output current: 0-5A.
Output voltage: 100A (but please note that this may be an error or misunderstanding here, as usually the output voltage is not expressed in amps (A), may refer to other parameters or there is a clerical error).
Output power: 40W.
Size and weight
Dimensions: The housing dimensions are 120mm x 80mm x 30mm.
Weight: 2.3kg.
DSSR122 48990001-NK
¥4,256.00Parameters and specifications
Input voltage: 48V DC (24V DC input voltage is also mentioned, but the main specification is 48V DC)
Output voltage:
24V DC (for 48V DC input)
5V DC (there is a variant mentioned, but not the main specification)
Output current:
22A (for 48V DC input, 24V DC output)
40A (variant for 24V DC input, 5V DC output)
Rated power: 528W (for 48V DC input, 24V DC output)
Efficiency: >89%
Ripple and noise: <2mVpp
Size and weight
Size:
220 mm x 130 mm x 60 mm (for some variants of DSSR122 48990001-NK)
250×190×180mm³ (another size mentioned)
Weight: 2KG
3CP260.60-1
¥4,159.00Parameters and specifications
CPU Model: Pentium III 500 (variants of other models such as Pentium III 266 and 166 are also mentioned)
Memory: 64MB DRAM (other models may vary, such as 32MB or 4MB)
SRAM: 512KB
Removable application memory card: CompactFlash
Slots:
The 3CP260.60-1 version usually has 1 or 3 slots for aPCI modules
Some variants may come with additional slots, such as PC card slots or RS232 interfaces
TRICONEX 3503E
¥5,269.00Parameters and specifications
Input voltage: 24V DC
Output voltage: 5V DC
Maximum voltage: 42.5V AC/DC
Recommended input range: 20-42.5V DC
Input frequency range: DC or 47.63Hz
Operating temperature: -40℃~85℃
Communication protocol: Modbus, Ethernet
Size and weight
Dimensions: 100mm×50mm×20mm
Volume Weight: 9.5 kg (may include packaging, etc.)
Actual weight: 4 kg
Shipping weight: 10.5 kg
CI522A 3BSE018283R1
¥5,085.00Parameters and specifications
Functions: High-precision analog input module, usually used in industrial automation systems, to convert analog signals (such as temperature, pressure, flow, etc.) into digital signals.
Measurement accuracy: The ability to measure various analog signals with high accuracy and convert them into digital formats to provide accurate input data for the control system.
Response time: It has a fast response time and can process and transmit analog signals in real time to ensure the real-time and stability of the system.
Input signal type: Support a variety of different input signal types, such as 0-10V, 4-20mA, etc., convenient for users to connect various sensors.
MVI69E-MBTCP
¥4,152.00Parameters and specifications
Input/Output size: 60/120/240-16-bit integer.
Available data: Supports up to 10,000 words of data.
Client and server connections: Up to 20 client and 20 server connections are supported.
Power requirements: Must be installed with a compatible power supply, backplane current load is 500 MA at 5.1 volts DC.
Data rate: Supports 10/100 Base-T Ethernet data rate.
Operating voltage: Possible operating voltage includes 24V DC, etc
TRICONEX 3351
¥5,623.00Parameters and specifications
Processor: Intel Core i7
Memory: 8 GB
Storage: 128 GB SSD
Redundancy design: 1+1 redundancy, that is, the primary CPU module and the standby CPU module, ensures seamless switchover when the primary module fails
Isolation voltage: 1500 Vrms
Operating temperature: -40°C to +70°C
Size and weight
Dimensions: 176 mm x 102 mm x 25 mm
Weight: According to some information, the Triconex 3351 series module may weigh about 1.5 kg
140CPU67160S
¥5,214.00trait
Front panel:
It contains LED indicators, including Ready, Run, Modbus, Modbus Plus, Mem Prt, Bat Low, Error A, etc
Spare battery slot
Select the Modbus port communication parameter switch
Key switch or band switch (depending on model)
The 9-core hole SUB-D connector is used for Modbus and Modbus Plus networks
Removable hinged doors with customer identification tags
In some models, it also includes LCD display, key switch, reset button, RJ45 and USB connector
Communication interface: Supports a variety of communication interfaces, such as Modbus, Modbus Plus, Ethernet, etc
MVI56-PDPMV1
¥6,235.00Parameters and specifications
Function: Serves as an input/output module between the PROFIBUS network and the ControlLogix processor, supporting the complete master station specification according to IEC 61158 standards.
Communication protocols: Transport via Class 1 or Class 2 DPV1 services is supported, enabling the processor to easily communicate with slave devices that support the PROFIBUS DPV0/V1 protocol.
Processor and memory: Using high-performance processors and memory, fast data calculation and processing, to meet the needs of complex control algorithms and data processing.
Number of slave stations: Up to 125 slave stations can be connected.
Data transfer: Supports up to 1536 bytes of cyclic input and 1536 bytes of output data.
2. Size and weight
Size: The main machine size is 320×240×150mm.
Weight: Approx. 1.2 kg
WR-D4004
¥4,168.00Parameters and specifications
Brand: RELIANCE or other possible manufacturer (depending on product source)
Model: WR-D4004 MD-D4014B (sometimes abbreviated as WR-D4004)
Applications: Widely used in manufacturing, energy, chemical industry, water treatment, transportation, building automation, environmental monitoring, medical equipment, agricultural automation, logistics and warehousing, aerospace, mining and metal processing and other fields
Processor: Equipped with a high-performance processor for performing complex control algorithms and logic
Control mode: Support a variety of control modes, such as position control, speed control, torque control, etc
Communication interface: It usually has a variety of communication interfaces, such as Ethernet, Modbus, CAN bus, etc., for data exchange and communication with other devices and systems