Model: 3HAC026272-001.
Brand: ABB.
Category: Analog input module.
Number of channels: Has multiple channels.
Multi-channel design: For receiving and processing analog signals, suitable for a variety of industrial automation applications.
High integrity: Ensure the accuracy and reliability of signal transmission.
Function: Real-time monitoring of vibration signals of equipment, analysis of vibration spectrum and characteristics to detect abnormal vibration patterns and faults.
Vibration parameters: can measure and analyze acceleration, speed, displacement and other vibration parameters.
Alarm and fault detection: With alarm function, vibration threshold can be set, and when the device vibration exceeds the preset value, the system will issue an alarm.
Data analysis: Recording vibration data for subsequent analysis and trend monitoring to help determine the health of equipment, predict potential failures, and optimize maintenance schedules.
Communication protocol: Support RS-422/RS-485 communication protocol, dual port, communication rate range of 1200bps to 115.2kbps.
Input/output signals: 0-10VDC, 4-20mA DC, 1-5VDC, 2-10VDC, etc.
Measuring range: 0-9999.
Accuracy: ±0.5% F.S.
Power supply: 24VDC±10%.
Size: 48mm x 96mm.
Installation mode: wall hanging.
Input voltage: 24v DC.
Communication protocol: Support Modbus TCP/IP.
Operating temperature: 40°C to 85°C.
Data acquisition: reliable and accurate.
Size: 100mm long, 50mm wide, 30mm high.
Motor frame size: 82 mm flange size, center diameter of 50 mm, motor frame length of 2.7 nm.
Encoder: A digital servo feedback motor encoder with integrated multi-turn absolute encoder and a flat-shaft output shaft (with shaft seal).
Length: According to some sources, its length is 50cm
Weight: About 30kg
Interface Type: The CI854A typically has a variety of communication interfaces for data transmission and communication with other control devices, sensors, and actuators.
High performance: The CI854A module usually has a high performance processor and communication capabilities, which can quickly respond to control instructions and achieve efficient data transmission.
High stability: The module has excellent stability and reliability, can run stably for a long time, reduce the failure rate and improve production efficiency.
Processor: Uses MOTOROLA’s low-power, high-performance PowerPC 750 microprocessor.
Cache: Has 32KB/32KB level 1 cache and 1MB back level 2 cache.
Memory: Onboard ECC SDRAM ranges from 32MB to 512MB, while onboard firmware capacity up to 1MB or can be specified by the user.
Interface: Dual PMC ports, support for front panel and P2 input/output (I/O), provide more connectivity and expansion options.
Extensibility: On-board debug monitor diagnostics with self-test, two 32/64-bit PMC expansion slots with front panel and P2 I/O, and 64-bit PCI expansion sandwich connectors.
Network communication: 10/100Mb/s Ethernet interface.
The ALSTOM AL132 is a high voltage electrical equipment or control board module commonly used in industrial automation and control systems. Its specific parameters and specifications may vary depending on the application field and product version.
One source states that the external dimensions are 2400mm x 1200mm x 1200mm, but please note that this does not necessarily represent the dimensions of all ALSTOM AL132 devices, as different models or versions may exist.
Function: The main function of the UT150-1 is to monitor current, voltage, frequency and other parameters in the power system in order to take protective measures in the event of abnormal conditions, such as circuit breaker operation or device isolation.
Protection function: The device has a variety of protection functions, such as over current protection, over voltage protection, under frequency protection, over frequency protection, short circuit protection and so on.
Communication interface: Usually has a communication interface, such as IEC 61850, Modbus, DNP3, etc., to achieve data exchange and communication with other monitoring systems and remote control systems.
CPU: Uses Intel Core i7.
Memory: 8GB DDR4.
Storage: Provides 256GB SSD storage space.
Communication interface: Support Ethernet, RS-232, RS-485 and other communication interfaces.
Operating temperature: can work in the range of -20°C to +60°C.
Protection grade: IP65 standard.
Size: There are two different size descriptions. One is 233mm x 175mm x 40mm and the other is 2004051mm.
Weight: About 1kg.
Rated voltage: 380V~400V.
Rated current: 45A.
Short-time withstand current: 1.5kA.
Mechanical life: 1,000,000 times.
Size: 450x250x300mm.
Weight: 15kg.
Supports 9-pin Sub_D jack connectors, which comply with the Profibus DP protocol specification.
The communication rate supports various options, such as 9.6kBit/s, 187.5kBit/s, and 1.5MBit/s.
The rate setting can be identified automatically or set with a dip switch.
With signal delay function, delay time ≤11Bit.
The lightning protection capability reaches 4000V, while providing 1.5A overcurrent protection and 600W surge protection.