Ammeter specification: Includes voltage, resistance and 400A current
Function: Used as an interface to connect different types of modules, you can connect digital input/output modules, analog input/output modules, communication modules, etc
Application: This product is mainly used as a driving module or accessory for ABB robots.
Power and voltage: Since it is part of ABB’s robotic system, the specific power and voltage parameters may vary depending on the model and configuration of the robot. However, the rated voltage of ABB low-voltage inverter is mostly three-phase 380V.
Other specifications: As a driver for ABB robots, it may include a variety of electrical and electronic parameters required to control the robot’s movement and perform tasks, but specific values and details may need to be determined depending on the specific robot model and application.
Communication function: May support a variety of communication methods, such as RS232, RS422, RS485 and other serial communication methods, as well as Ethernet communication (including wired and wireless)
PWM pulse formation: Using SG3525A as the main technology, the output pulse frequency range can be between 20KHZ and 60KHZ, the pulse interval is 180 degrees each other, and the dead time can be adjusted by itself
IGBT drive: It is suitable for frequency and power regulation of IGBT full-bridge inverter series resonant induction heating device, and the power range is between 10KW and 120KW
Mainly used as DCS system and PLC system accessories, for robot system accessories, large servo system spare parts.
The proportional gain, speed proportional gain, speed integral time constant, speed feedback filter factor and other parameters of the position loop regulator are set. The specific values of these parameters are determined by the specific servo system model and load condition.
Watch Window number format: Versions prior to 1.05.1 required a specific number format, using commas (“, “) to group numbers and decimal points (“. “). ) performs decimal notation. Versions 1.05.1 and later do not require any special numeric format.
