Type: Electronic controller
Mode :873EC JIPFGZ-5
Manufacturer :Foxboro
Control modules :PID, integration, and other types of control, depending on configuration
Input/output signal: Support 4-20mA, 0-10v, RTD/TC and other signal types, depending on configuration
Interface: Foundation fieldbus, HART and other industry standards, depending on configuration
Diagnostics: Extensive diagnostics, including tracking and warning of potential problems
Power supply :24VDC, normal
Type: Electronic relay
Model :RMV 112D
Manufacturer :DEIF
Voltage range :230 VAC, 50/60 Hz(standard), but other voltages can be supported, depending on configuration
Inputs: Discrete, analog and other types of inputs, depending on configuration
Output signal :1 or 2 open or closed pins, depending on configuration
Additional functions: need to adjust, including delay, lock, etc.
Diagnostic capability: Provides self-diagnosis and status indication to facilitate fault discovery and maintenance
Type: Electronic driver (capacitor)
Mode :1C31227G01
Manufacturer: Westinghouse
Capacitans: Depends on the specific configuration, but is usually in the microfarad (μF) range.
Rated voltage: depends on the configuration, but is usually between 16v and 50v
Design type: Any, depending on configuration
Operating temperature range :-55°C to +105°C, depending on configuration
Input voltage: 24 VDC
Operating temperature: -40°C to +85°C
Memory: 64KB
Input quantity: 16
Output quantity: 16
Specifications:
Size: 17.71×13.77×7.87 cm
Series: Mark VIe
UL Certification: File E157382
CE certification: EN 61000-6-2:2005 and EN 61000-6-4:2007
FCC compliance: Part 15 Subpart B, Class A
Product Description: The device is a high-performance and reliable data acquisition device, which is suitable for various application scenarios requiring high-precision and high-speed data acquisition.
Parameters: Has 16 analog inputs, 2 analog outputs, 8 digital I/O (DIO) lines, and two 24-bit counters/timers. It has a sampling rate of up to 333 kS/s and a resolution of 16 bits.
Size: 6.3 x 3.9 inches, weight 7.2 ounces.
Features: no switch, no jumper design, easy to use. It can be configured and programmed using the NI-DAQ 6052 driver software.
Functions and uses: To achieve accurate and reliable data acquisition, suitable for applications requiring high-speed and high-precision data acquisition, such as industrial automation, test and measurement, scientific research experiments, etc.
ABB’s PM783F 3BDH000364R0001 is a motor protection and monitoring device designed specifically for the industrial automation sector. The following are the main parameters of the product:
Input power: The PM783F requires the appropriate power supply to power it, usually AC power, with the specific voltage range depending on the model and configuration.
Control output: The device provides a control output function, through which other devices or actuators can be controlled, such as circuit breakers, contactors, etc.
Protection: The PM783F has a variety of protection functions, including overload protection, short circuit protection, ground fault protection, undervoltage protection and overvoltage protection to protect the motor and circuit from damage.
Monitoring function: The device can monitor the running state and parameters of the motor, such as current, voltage, power, temperature, etc., and provide fault indication and alarm output.
Input voltage: Usually 24V DC, but other voltage options may be available, depending on the model and configuration.
Temperature range: The set temperature range is usually between -50°C and +150°C, depending on the actual application needs.
Control accuracy: Temperature control accuracy can usually reach ±1°C or higher, depending on the model and configuration.
Output signal: Usually has an analog output (such as 4-20mA) or a digital output (such as Modbus communication) to drive an actuator or display device.
Protection level: IP level is usually higher to adapt to various industrial environments.
Input channel. 8 isolated and independent channels.
Enter the range. The FBM201 is 0 to 20mA DC; The FBM201b is 0 to 100mV DC; The FBM201c is 0 to 5V DC; The FBM201d is 0 to 10V DC.
Power consumption. Max. 7W.
Heat dissipation. Max. 3W.
Calibration requirements. No calibration modules and terminating assemblies are required.
Operating environment temperature. -40 to +70°C (-40 to +158°F).
Relative humidity. 5 to 95% (non-condensing).
Model: SD812
Brand: ABB
Communication interface: Supports a variety of communication protocols, such as Ethernet/IP, Profinet, Safety over EtherNet/IP, etc
Power supply: Usually 24V DC
Specifications:
Processing power: Depending on the specific hardware configuration, the SD812 may have different processing power
Communication rate: Supports high-speed communication to meet the needs of real-time control
Safety features: Compliance with relevant safety standards, such as SIL rating
Model: EI813
Brand: ABB
Communication protocols: Support a variety of Ethernet communication protocols, such as Ethernet/IP, Profinet, Modbus TCP, etc
Interface type: Ethernet interface (usually RJ45 interface)
Data transmission rate: Supports high-speed Ethernet communication and has a high data transmission rate
Specifications:
Installation method: Usually rail installation or panel installation
Application field:
Industrial Automation: ABB EI813 is suitable for communication and control in various industrial automation systems, such as production lines, machinery, logistics systems, etc
Model: FI830
Brand: ABB
Bus type: Supports a variety of Fieldbus protocols, such as PROFIBUS DP, PROFIBUS PA, FOUNDATION Fieldbus, etc
Number of ports: The number of ports may vary depending on the model
Communication rate: Support a variety of communication rates to meet the requirements of different fieldbuses
Power requirements: Usually 24V DC or 110/230V AC
Application field:
Industrial automation: ABB FI830 is widely used in industrial automation systems to connect and control various field devices such as sensors, actuators, PLCS, etc
