Grid view List view

Showing 15109–15120 of 19874 results

ABB IMHSS03

¥6,032.00

Parameters and Specifications:

  • Power Supply Voltage: 24V DC1
  • Rated Current: 5A1
  • Maximum Current: 10A1
  • Output Power: 120W1
  • Control Mode: Analog/Pulse1
  • Response Frequency: 500Hz1
  • Accuracy: ±0.05%FS1
  • Reliability: MTBF > 10000 hours1

ABB PPC905AE101

¥6,235.00

Parameters and Specifications:

  • Electrical Parameters:
    • Bus Consumption Current: 80mA
    • Total Power Consumption: 3W
    • Rated Voltage: 24V DC
    • Continuous Allowable Voltage: 30V DC
    • Surge Voltage: 35V DC, 0.5s
    • Logic “0” Voltage Range: 5V DC, 1mA
    • Logic “1” Voltage Range: 15V DC, 1mA
    • Input Delay: 4.5ms
    • Signal Input Type: PNP/NPN, Photoelectric Isolation (Field to Logic): 500V AC, 1 minute
    • Allowable Leakage Current: 1mA
    • Cable Length (Shielded): 500M
    • Cable Length (Unshielded): 300M

woodward TG-13

¥6,059.00

Parameters and Specifications:

  • Type: Woodward TG-13 Steam Turbine Mechanical Hydraulic Governor12
  • Application: Designed for small steam turbines requiring non-synchronous (variable speed) operation13
  • Maximum Rotation Angle: 40° for output shaft3
  • Rated Speed Reduction: 2° at 2010 rpm1
  • Screw Speed Setting Range: 1200-2400 rpm1

Dimensions and Weight:

  • Exact dimensions and weight are not provided in the search results.

ABB 3ASC25H203

¥4,195.00

Parameters and specifications:

Input voltage: 100-240V AC, 50/60hz.
Output voltage: 24V DC.
Maximum current: 10A.
Operating temperature: -25℃~ +70℃.
Frequency range: 47-63 Hz.
Power: Not given directly, but may be related to the operating voltage and current.
Interfaces: May include PXI interfaces for compatibility with the PXI platform.

GE DS3800XAIC1C1C 6BA03

¥5,241.00

Parameters and specifications:

Brand: GE (General Electric)
Type: DS3800XAIC1C1C 6BA03 module, may be part of a DCS (Distributed control system) or PLC (Programmable Logic Controller) system
System environment: Standard VV
System capability: Normal
Operating system: DCS/PLC
System function: Normal

Prosoft MVI56E-MCMR

¥6,028.00

Parameters and specifications:

Communication protocol: Support MODBUS serial /ASCII communication protocol, and compatible with RS232/RS485 and RS422 electrical standards.
Baud rate: can be configured from 110 baud to 115.2 kbps.
Serial Settings: Support none, odd or even parity, data bits 5, 6, 7 and 8, and stop bits 1 or 2.
Working voltage: 24V.
Operating temperature: Standard industrial temperature range, specific values may vary depending on the application environment.

ABB 3ASC25H203

¥5,632.00

Parameters and Specifications:

  • Brand: ABB12345
  • Model: 3ASC25H20312345
  • Communication Protocols: Supports various communication protocols including Modbus, Profibus, and CANopen1
  • Output Type: High-performance analog output module16
  • Resolution and Quality: High resolution, low distortion, and low noise for precise and high-quality analog signal generation16
  • Sampling Rate and Memory: High sampling rate and large memory capacity for high-speed and long-duration data generation16
  • Input Voltage: 100-240V AC, 50/60Hz2
  • Output Voltage: 24V DC2
  • Maximum Current: 10A2
  • Operating Temperature: -25℃ to +70℃2
  • Frequency Range: 47-63Hz2

GE 8851-LC-MT

¥4,265.00

Parameters and Specifications:

  • Model: GE 8851-LC-MT
  • Interface Type: LC
  • Transmission Rate: 10/100/1000Mbps
  • Operating Wavelength: 1310nm
  • Transmit Power: -9.5dBm~0dBm
  • Receive Sensitivity: -20dBm
  • Maximum Transmission Distance: 10km
  • Operating Temperature: -40℃~85℃1

NI PXI-7852R

¥4,265.00

Parameters and specifications:

Analog input: 8-channel analog input, 750 kHz independent sampling rate, 16-bit resolution, ±10 V.
Analog output: 8-channel analog output, 1 MHz independent update rate, 16-bit resolution, ±10 V.
Digital lines: 96 digital lines that can be configured for input, output, timer or custom logic at rates up to 40 MHz.
FPGA: Equipped with a Virtex-5 LX50 FPGA, which can be programmed via the LabVIEW FPGA module.
DMA channel: 3 direct memory access (DMA) channels for high-speed hard disk data reading and writing.

GE HYDRAN M2

¥6,235.00

Parameters and Specifications:

  • Measurement Principle: Uses capacitive electrode and thermal conductivity sensors to measure moisture and hydrogen concentration in transformer oil1.
  • Measurement Range: Moisture (0-10,000 ppm), Hydrogen (0-10,000 ppm)1.
  • Accuracy: ±10% or ±25 ppm1.
  • Communication Interface: RS485, RS232, MODBUS, TCP/IP copper or fiber12.
  • Operating Temperature Range: -40°C to 85°C13.
  • Power Supply: 24 VDC or 100-240V AC23.

MOOG T200-410J-0AA1

¥5,623.00

Parameters and specifications:

MOOG T200-410J-0AA1 is a high-performance motion control solution. It has high-precision motion control for precise position, speed and acceleration control. The equipment is suitable for a variety of industrial applications, such as automated production lines, robotics, semiconductor manufacturing equipment, etc.
Main components: including the use of low inertia, high speed and high precision three-phase brushless DC motor; Digital servo driver, which can realize high-speed and high-precision motion control; High resolution photoelectric encoder to achieve high precision position feedback; Digital controller can realize multi-axis motion control and a variety of control algorithms.
Compatibility: Compatible with a variety of communication protocols, such as Modbus, CANopen, etc.

ABB ECS086329-003

¥4,125.00

Parameters and specifications:

Voltage: 24V.
Current: 100-400AA (although this range may need to be adjusted for specific applications and configurations).
Range: 140-210.
Accuracy: 0.5-0.5.
Size: 2601050mm.

Weight:

2KG.