Bandwidth: As a digital device, its bandwidth is usually expressed in bps (bits per second that can be transmitted), which is used to describe the rate and ability of signal transmission.
Frequency response: Describes the difference in the processing capacity of the device for signals of different frequencies.
Modular design: This design makes installation, maintenance and upgrading easier.
Processor: This model may be equipped with the MC68030 Enhanced 32-bit microprocessor or a similar microprocessor, which has an on-chip cache for instructions and data, increasing the efficiency of the processor.
Memory: The specific memory configuration may vary depending on the product version or configuration.
Bus: As a VMEbus single-board computer, it may support the VMEbus communication protocol.
High performance: With an efficient processor and memory configuration, the single-board computer is able to handle complex computation and control tasks.
Model: RSER200-4.
Operating voltage: 12V DC or 24 VDC/48 VDC (depending on the application scenario).
Output signal: includes 4-20 mA, 0-5 VDC, RS232/485 (when the piezoelectric sensor measurement range is 0-2000 bar).
Measuring range: 0° to 360° (rotary encoder version).
Accuracy: ±0.1% FS (piezoelectric sensor) or ±0.5 arcseconds (rotary encoder).
Speed range: 0 rpm to 6,000 rpm (rotary encoder).
Operating temperature: -40°C to +70°C (piezoelectric sensor) or -40°C to 85°C (rotary encoder).
Storage temperature: -55°C to +85°C.
Protection Level: IP67 (for both versions).
Voltage: Usually 24V.
Current: Support range from 100A to 400A.
Application: It can be applied to DI820, DI821, DI825, DO820, DO821 and AI825 I/O modules.
Weight: Approximately 2KG.
Voltage: Generally 24V.
Current: Under certain conditions, the current range can be between 100A and 400A.
Heat dissipation: When operating at 24 volts DC, heat dissipation is 4.220 watts.
Weight: The module weighs 2KG.
Model: 3BHB020720R0002.
Power supply: Usually support 115~240V voltage range.
Interface: The original interface adopts the terminal interface mode and supports the communication protocol.
High gate rear edge current: For some application scenarios, especially at low temperatures, it may have the characteristics of high gate rear edge current.
Model: 5SHY3545L0016.
Working voltage: 24V.
Rated current: 5A.
System memory: 8MB.
Communication interface: May include HDMI interface.
Working environment temperature: -40 to 100℃.
Dimensions: Different data exists regarding the dimensions of the module. One saying is 1200mm
Model: 5SHY35L4510.
Product net depth/length: 439 mm.
Product height: 41 mm.
Product net weight: According to different information, there are two possible weight, respectively 2.9 kg and 10 kg. This discrepancy may be due to differences in product configurations or versions, and further verification is recommended to obtain accurate data.
Output voltage: 24V.
Configure the temperature module: Yes.
Control principle: Other (may need to be further understood based on specific application scenarios).
Purpose: For the configuration of automation systems, select the rack from the electronic classification, and the selected module will be assigned to the required slot on the rack.
Rated voltage: V DRM = 4500V for high voltage applications.
Rated current: I TGM = 4000A, I TSM = 32×10³A, suitable for high current load.
Reverse voltage: V RRM = 17V, applicable to scenarios that require reverse voltage protection.
Off state current: I DRM 50mA under V D = V DRM.
Size: about 365874mm.
Model: 5SHY3545L0021.
Working temperature: up to 80℃, suitable for high temperature working environment.
Package type: Standard package for stable performance and reliable connection.
Batch number: The latest batch, to ensure the freshness and reliability of the product.
High working temperature: suitable for high temperature working environment, with good thermal stability and reliability.
Current and voltage: The current specification of the PM866K01 module is 5A and the voltage is 220V.
Resistance: Its resistance value is 5 ohms.
Processor and memory: Equipped with a high-performance processor and enough memory to support fast data processing and control operations.
Communication interface: Supports a variety of communication protocols, such as Ethernet /IP, Modbus TCP/IP, etc., to facilitate data exchange and communication with other devices.
Size: Generally 18cm x 18cm x 16cm (L x W x H), there are also data indicating 180mm x 119mm x 135mm (L x W x H).
Model: PM864AK01 3BSE018161R1.
Bandwidth: 50MHz.
Rising time: ≤7ns.
Real-time sampling rate: 1GS/s.
Waveform capture rate: ≥2000wfms/s.
Vertical deflection coefficient: 1mV~20V/div.
Storage depth: 25kpts.
Scanning time base: 2ns~50s/div.
Trigger type: edge, pulse width, alternate.
Interface: USB OTG.
Power supply: 100~240VACRMS, 40~440Hz, CAT II.
LCD size: Diagonal 178mm (7 inches, 64K, 800X480).