Grid view List view

Showing 14965–14976 of 20827 results

140CPS12420

¥5,623.00
Parameters and specifications:
Input voltage/Power supply type: 230V AC 170 to 276V or 115V AC 93 to 138V, 47 to 63Hz/ Redundant
Output current: 600mA 230V or 1100mA 115V.
Instantaneous peak current: 38A 115V or 19A 230V.
Rated power VA: 130VA.
Relevant fuse grade: 2A slow break type.
Harmonic distortion: <=10% basic RMS.
Power output current: 10A 60℃ redundancy; 11A 60 ° C independent.
Power consumption: 6+(1.5x output current), where the output current unit is A.
Product Certification: CUL.

VE4005S2B1

¥5,124.00
Parameters and specifications:
Input voltage: 24V DC.
Output power: 10W.
Frequency (speed) measurement range: 0.5Hz-20 kHz.
Output voltage linear range: -4… -20V (the supply voltage is -24V).
Maximum range of output voltage: -1… -22V.
Output voltage: -12V (symmetrical measurement range at both ends).
Internal resistance: 100k.
Response time: 15.

140ACI04000

¥4,125.00
Parameters and specifications:
Input quantity/Power consumption: 16 channels, power consumption 5W.
Address Requirement: 17 Enter a word.
Analog input resolution: multiple modes, such as 0 ~ 4095 count (4 ~ 20mA); 0 ~ 25000 count (0 ~ 25mA); 0 ~ 20000 count (0 ~ 20mA); 0 ~ 16000 count (4 ~ 20mA).
Absolute maximum input: 30mA.
Input impedance: 250 ohms.
Absolute accuracy error: +/-0.125% full scale.
Linearity error: Max +/ -6μA (4 ~ 20mA, 0 ~ 25mA, 0 ~ 20mA); Max. +/-12 μA (4 ~ 20mA).
Temperature deviation accuracy: <= 0.0050% full scale /℃; +/ -0.0025% full scale /℃.
Common mode suppression: >-90dB 60Hz.
Fault type: Disconnected (4 to 20mA).
Required bus current: 360mA

3008

¥5,412.00
Parameters and specifications:
Body dimensions: length 4435mm, width 1840mm, height 1652mm, wheelbase 2613mm.
Engine type: Available with 1.6T L4 and 2.0L L4 engines.
Drive mode: front-to-front.
Standard seating capacity: 5.
Luggage capacity: 503L/512-1604L.
Fuel consumption: 6.4 to 8.8 L/100km.
Tank capacity: 60L.
Maximum speed: 204 km/h.
Acceleration time: 0-100km/h acceleration time is 10 seconds.

IC695ETM001

¥3,652.00
Parameters and specifications:
Working voltage: 24VDC.
Operating temperature: -40℃ to 70℃.
Operating humidity: 5% to 95%.
Communication rate: 10/100 Mbps transmission rate is supported.
Communication protocol: Ethernet /IP.
Supported chip: FPGA.
Ethernet processor speed: 200 MHz.
Data transfer rate (RS-232 serial port) : 1200 bps to 115200 bps.
Size and weight:
Dimensions: 125mm x 72mm x 138mm.
Weight: About 0.5kg.

SJDE-04ANA-OY

¥4,261.00
Parameters and specifications:
Since the specific technical parameters and specifications may vary with different product models and versions, I cannot directly give the detailed parameters and specifications of SJDE-04ANA-OY. But in general, the main parameters of the servo driver may include the power supply voltage, output current, control signal type, response frequency, and so on.
Series: SJDE-04ANA-OY belongs to the servo drive family of Yaskawa Electric.

P0922YU

¥5,262.00
Parameters and specifications:
Power input:
Input voltage range: 85 to 265 volts AC or 108 to 145 volts DC, nominal 125 volts DC.
Input frequency range: 47 to 63 Hz.
Input current: 5.6A (RMS maximum) for 85 V AC input, 2.5A (RMS maximum) for 230 V AC input.
Power output:
Output voltage: 24.0 V DC, 0.2 V DC nominal factory Settings.
Voltage line adjustment rate: 2.0% of Vout.

TSXP573623

¥5,264.00
Parameters and specifications:
Functional features:
Outstanding: Boolean instruction execution time only 37ns, numeric instruction only 45ns.
Application experts: Provide weighing, counting, process control, position control, safety and other special functional modules.
Excellence: The new Untiy software combines the benefits of Concept and PL7 to provide an integrated PLC emulator.
Value for money: Provides processors with integrated Ethernet and Fip bus, excellent performance and economical price.
Hot spare redundancy: Based on Modicon Qutumum’s proven hot spare technology.
Communication: The backplane bus communication rate is a constant 12Mbps, using the standard industrial Ethernet protocol Modbus TCP/IP specified by the national standard GB/Z19582-3, the application layer adopts the open Modbus protocol, the communication rate is not less than 100Mbps.

CC-TAOX11

¥6,205.00
Parameters and specifications:
Supported controller models: T8000R, T8000RP, T8000RX, etc.
Output type: analog current, analog voltage.
Output accuracy: ±0.1%.
Output range:
Analog current: 4 mA to 20 mA.
Analog voltage: 0 V to 10 V.
Communication interface: RS-485, Modbus RTU, etc.
Operating temperature: -40°C to +85°C.
Storage temperature: -55°C to +90°C.

CC-PCF901

¥6,205.00
Parameters and specifications:
Power parameters: Input voltage is 120VAC, output voltage is 24VDC and output current is 10A.
Test certification: including IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT) and other electromagnetic compatibility and environmental testing standards.
Size and weight:
Size: There are two different size information, 90mm×125mm×27mm and 132mm×105mm×52mm, which may be the difference between different models or versions.
Weight: Different weight values are given in different sources, such as 2 kg, 800g and 0.5kg, which again may be the difference between different models or versions.

CC-PAIH51

¥4,152.00
Parameters and specifications:
Input/Output Model: CC-PAIH51 – Advanced analog input with HART.
Input type: Current (2-wire or self-powered transmitter).
Input channels: 16 channels (all single-ended).
A/D converter resolution: 16 bits.
Input range: Only 4-20 mA (up to 200 Ω).
Input scan rate: 50 ms.
Hardware accuracy: 0.075% of ± full scale (23.5°± 2°C) or 0.15% of full scale (0 to 60°C).

DC10-12P0-0000

¥4,251.00
Parameters and specifications:
Brand: The product may be associated with multiple brands, such as WATLOW.
Model: DC10-12P0-0000.
Applicable scope: automation industry.
Series:
The DC10-12P0-0000 itself is a specific model, not a series. However, it may belong to a family of thermostat or automation system equipment.