Product Type: Integrated flame scanner with built-in flame relay.
Spectral range: Mainly used to detect ultraviolet emission, specifically 295 to 340 nm wavelength.
Uses: Used to monitor x, gamma rays, radiation dose rates in various radioactive workplaces. At the same time, it is also suitable for pipeline burners, industrial gas burners, refinery applications, low NOx burners, exhaust gas units and incinerators.
Power: 0.9kw.
Working pressure: 10Mpa.
Traffic: Small.
Fluid inlet and outlet diameter: 10cm.
Drive mode: electric.
Suction: 7m.
Head: Low.
Electrical connection: Through 8-pin electrical Quick disconnect (QD).
Simulated output of flame intensity: 4 to 20mA.
Safety features: Ex II 2 G/D level, ATEX certification.
Relay type: Two single-pole double-throw (SPDT) relays, connected together to form a double-pole double-throw (DPDT) form
Power consumption: Generally 6 watts
Software support required: 3500/22 Transient Data Interface (TDI) module, 3500 Rack Configuration software version 4.5 or later, 3500 Data acquisition software version 2.40 or later, 3500 Data Display software version 1.40 or later
Function: It is usually used to measure various industrial process parameters, such as pressure, temperature, flow, etc., and convert these parameters into standard electrical signals (usually 4-20 mA) or digital signals for processing and analysis by monitoring and control systems.
Measurement parameters: May primarily be used to measure pressure, but the exact range may vary by model and configuration.
System environment: suitable for constant temperature environment.
Voltage: 90V.
Current: 19A.
Memory: 125.
Pressure: 30 (unit not specified, may be some pressure range or standard).
Measurement range: In some cases, the measurement range may be 1kPa.
Make and Model: 33VM52-000-29 under the Pacific Scientific brand.
Voltage and power: Operating voltage is 24 volts, power is 2.3 watts. However, another source mentions that the rated voltage is 18-36V, and the specific configuration may vary.
Speed and current: up to 5000 RPM, rated current (continuous) of 0.6 amps or 3.1-5.7 A (depending on the source).
Encoder: No encoder.
Output shaft: A circular shaft with a diameter of 6.35 mm.
Protection function: including overvoltage, undervoltage, overcurrent, undercurrent, differential protection, distance protection, direction protection, frequency protection, power protection, etc.
Communication interface: Supports RS485, Ethernet and other communication interfaces.
