Brand: Rexroth
Model: KSM01.2B-071C-35N-M1-HP0-SE-NN-FW
Use: pressure control valve, working principle is solenoid valve
Operating temperature: 50℃
Working pressure: 220mpa
Interface size: 50
Flow rate: 40CV
Part number: IS200VCRCH1B.
Working voltage: 220V.
Output frequency: While direct output frequency information about the IS200VCRCH1B is not provided, some GE products may support high-frequency operation, such as 350kHzHz. However, this frequency may not be directly related to the specific application of IS200VCRCH1B.
Function: Discrete input/output board that controls 24 relay outputs and accepts 48 discrete inputs from four terminal boards.
Mount: Mount into the VME I/O rack, which has two sets of plugs for connecting to the terminal board.
Operating voltage: May vary depending on the specific model or configuration, but some information mentioned that the ELOP II operates at 24V, while other DCS/PLC system modules may operate at 220V.
Current: The ELOP II’s drive current is adjustable in 8 gears from 2.0A/ phase to 6.0A/ phase.
Output frequency: standard kHz.
System memory: at least 512MB.
Function: ELOP II may be a programmable electronic system (PES) programming software or related hardware module for industrial automation control.
Operating environment: normal temperature.
System capability: Normal.
Size and weight
Size: 236*124mm
Power Supply: 24VAC or 24VDC, typical power consumption 15 watts, maximum power consumption 25 watts.
Current: The current range may vary according to the specific application, there is a current value of 100-400A mentioned, but it should be noted that this may be confused with other products.
Storage capacity: 2 GB of non-volatile flash.
Point capacity: Maximum support 30,720 points.
Operating system: PLC system.
System function: Automatic.
System environment: normal temperature.
System capability: Powerful.
Motor power range: 0.12~ 200kW.
Torque range: 85~18000 nm.
Ratio range: 5~28000.
Input speed range: 750 to 3000 rpm.
Output speed range: 0.05~500 rpm.
Ambient temperature range: -20°C to +40°C.
Support system: PLC.
Control principle: DCS.
Program capacity: 8K steps.
System capability: Powerful.
Measuring range: 2.0KN (kN)
Measurement accuracy:
Battery powered: ±0.5%
AC220V power supply: ±0.25%
Supply voltage: 24V (some information may also include other supply options, such as AC220V)
Current: 100-400A (This current range may be suitable for specific application scenarios or device models, further confirmation is required)
Processor:
The Artesyn MVME7100 is likely to feature an MPC864xD processor with a 1.3GHz system-on-chip, dual-core e600 processor.
The MOTOROLA MVME7100 is likely to feature a 1.3GHz PowerPC 604e processor.
Memory:
DDR2 ECC memory up to 2GB.
The MOTOROLA MVME7100 may have a memory range of 1 GB to 4 GB.
Storage:
128MB NOR flash, and optional 2GB, 4GB or 8GB NAND flash.
Interface:
May include Gigabit Ethernet ports, VMEbus, RS-232, RS-485 and other communication interfaces.
USB 2.0 controller for integrating cost-effective peripherals.
Input voltage range: 12-48VDC
Output voltage range: 5VDC
Output current: Max. 10A
Efficiency: greater than 90%
Monitoring gas: hydrogen (H2), carbon monoxide (CO), acetylene (C2H2), ethylene (C2H4), etc
CPU: 32-bit RISC processor
Operating temperature: Operating temperature -20°C to +50°C, storage temperature -40°C to +70°C
Ambient humidity: 5% to 95% relative humidity (no condensation)
Input voltage:
For the DC version, the input voltage is usually 220VAC.
For other types of controllers, there may be different voltage requirements, such as 24VDC.
Output voltage:
The output voltage of the DC supply version is 0-10VDC.
Output power: 800W (DC version).
Current: 100-400A (some information mentioned, but may be specific to specific application scenarios).
Working temperature:
The operating temperature of the DC power supply version is -10℃ to +45℃.
System power supply voltage range: 20 to 32V DC
Field voltage range: 18 to 32V dc
Output voltage measurement range: 0 to 32V DC
Maximum withstand voltage: -1 to 40V DC
Rated output current (continuous) : 2A per channel per power pack for a total maximum output current of 8A
Maximum capacitance: Pre-release 3.5:30-55uF
Minimum on-state load current: 50mA
For servo driver versions, the output frequency may vary according to application requirements, but generally has a high dynamic response capability.
Accuracy: For pressure sensor versions, high precision is available to ensure accurate pressure measurement results.
System environment: normal temperature.
System capability: Temperature control
Operating system: PLC system
Specially designed to control the speed, position and torque of the motor.
Performance: May have high-speed, high-precision control performance to meet the needs of precision motion control.
Communication protocols: Support a variety of communication protocols, such as EtherCAT, Profinet, etc., can easily connect and communicate with other devices.
Model: S72402-NANANA (may include suffix such as -NA-225).
Series: Servo drive series belonging to Kollmorgen.
Output: NA indicates that the output of the driver has a neutral line.