Input Voltage: Dependent on the application, but typically 24 VDC or 110/230 VAC.
Output Signals: Depends on the specific module, but can include analog (e.g., 4-20 mA) and digital signals.
Communication Interface: Supports common industrial protocols such as Modbus, Profinet, Ethernet/IP, or BACnet.
Isolation: Channel-to-channel and/or channel-to-ground isolation.
Accuracy: Typically ±0.1% or better for analog signals.
Rated Voltage: 220-240V
Rated Current: 45A
Frequency: 50/60Hz
Poles: 2P
Breaking Capacity: 10kA
Residual Operating Current: 30mA
Residual Non-Operating Current: 15mA
Residual Make/Break Capacity: 500A
Rated Short-Circuit Current: 10kA
Installation Type: DIN Rail
Maximum Discharge Current: 20kA (for surge protector)
Maximum Continuous Operating Voltage: 275V AC (for surge protector)
Response Time: Less than 25 nanoseconds (for surge protector)
Type: Digital Input/Output Module
System Voltage Range: 20 to 32 Vdc
Circuit Type: Fault-Tolerant, Triple Modular Redundancy (TMR) with Three Identical Circuits Operating in Parallel
Monitoring Output Quantity: 40 Independent Channels
Independent Power Groups: 8 Groups with 5 Working Outputs Each
Field Voltage Range: 18 to 32 Vdc
Output Voltage Measurement Range: 0 to 32 Vdc
Maximum Tolerated Voltage: -1 to 40 Vdc
Rated Output Current (Per Channel Per Power Group): 2A, Total Maximum 8A
Capacitance (Pre-release 3.5 Version): 30-55uF
Minimum On-State Load Current: 50mA
Output Resistance (Off-State): 33Ω
Output Resistance (On-State): 0.6Ω
Output Short-Circuit Protection: Electronic (Latching)
Channel-to-Channel Crosstalk: Limited to -40dB or Less
Storage Capacity: 256 KB (estimated from similar ABB products)
Communication Interfaces: RS-485, Ethernet
Operating Temperature: -20°C to 60°C
Storage Temperature: -40°C to 85°C
Protection Rating: IP65
Product Standard: Conforms to IEC 61850 standard
Protocols Supported: Modbus and BACnet
Dimensions (L x W x H): 100 mm x 60 mm x 30 mm
Weight: 0.2 kg
Display Type: Liquid Crystal Display (LCD)
Resolution: High-resolution graphics
Input Types: Touchscreen interface
Processor: High-performance processor for fast data processing and response
Communication Interfaces: Supports multiple interfaces such as Ethernet, serial communication, etc.
Operating Temperature: -30°C to 70°C
Storage Temperature: (-40°F to +185°F) / (-40°C to 85°C)
Sizes Available: 6.4″, 8″, 10.4″, 12.1″, 15″ series, and standard 19″ rack-mountable
Weight: Approx. 0.82 kg
Processor Type: 80386EX
Processor Speed: 25MHz
Operating Temperature Range: 0 to 60°C (32 to 140°F)
Typical Scan Rate: 0.22 ms/K
Maximum User Program Memory: 32K bytes
Power Requirement: +5 VDC, 670 mA
Rated Power: 220kW
Rated Voltage: 400VAC
Rated Current: 320A
Rated Speed: 3000rpm
Overload Capacity: 150% for 1 minute
Speed Control Accuracy: ±0.01%
Torque Control Accuracy: ±0.5%
Manufacturer: ABB
Type: Synchronizer Module
Function: Control synchronization of generators with other generators or grids in power systems
Monitoring Capabilities: Monitors voltage and frequency in power systems
Dimensions and Weight:
Weight: 2KG
Power Supply: 100-240 VAC, 50/60 Hz.
Memory: 256 MB SDRAM, 32 MB Flash (another description is 64 MB).
I/O count: up to 2048 points.
Communication interface: Support Modbus, PROFIBUS, Ethernet /IP and other communication protocols.
Operating temperature: -40°C to 70°C or -40°C to +60°C (depending on the description).
Size: 279mm x 127mm x 127mm. Another description is 49×45.3×6.8cm or 9kg (possibly shipping size or weight).
Weight: 2.3kg or 4 kg (depending on the description).
Brand: Emerson
Model: 5X00419G0
Type: PLC Module Card1234
Operating Voltage: 24V
Current: 100-400A
Weight: Approx. 2KG
Communication Protocol: Supports PROFINET IO, a widely used Ethernet communication protocol in the industrial automation field
Communication Speed: Can be selected between 10 Mbps and 100 Mbps, defined in the IEEE 802.3u 10/100 Base-Tx standard
Status Indicators: Equipped with status indicators, which turn green when operating normally and red when a fault occurs
Power and Power Consumption: Receives 24VDC power through the CEX bus, with a maximum current consumption of 250 mA. Under typical operating conditions, the power consumption is 3.8 W, and the maximum power consumption is 6 W
Protection Level: IP20 according to EN60529 and IEC 529 standards, indicating a certain level of dust and water resistance, but not suitable for harsh industrial environments
Input Voltage Range: 2.5V to 6V
Output Load Current: 1A
Output Voltage Range: Factory-preset options include 1V, 1.2V, 1.3V, 1.5V, 1.8V, 2.5V, 2.7V, 2.8V, 2.85V, 3.0V, 3.2V, 3.3V, and 5V. Adjustable range from 1V to 5V with 50mV increments
Operating Supply Current: 70uA
Line Regulation: Excellent, 0.05%/V
Dropout Voltage: 350mV@1A (VOUT=3.3V)
Power Supply Rejection Ratio: High
Input Voltage: 24VDC
Output Voltage: 12VDC
Output Current: 1.5A
Operating Temperature: -20℃ to 70℃
Storage Temperature: -40℃ to 85℃
Compliance: RoHS Standard
Size: 50mm × 50mm × 20mm
Weight: 50g