Showing 14869–14880 of 19874 results
¥ 4,521.00
Parameters and Specifications :
Operating Frequency : 60HZ
Output Modes : Automatic Calculation, Output PPM and %
Measurement Range : 1ug~100mg
Resolution : 0.1ug
Titration Speed : 2.1mg/min
Sensitivity : Not greater than 2% for 0.1ug~100g, converts to 0 above 1mg
Voltage : 24V
Maximum Output Current : 15A
Operating Temperature Range : -25~70℃
Current : 100~400A
Weight : 2KG
¥ 6,235.00
Parameters :
Input Channels: 161
Input Voltage: 24 VDC nominal2
Operating Temperature: -40°C to 70°C2
Power Consumption: 10 W2
Analog Input Range: 4-20 mA2
¥ 6,235.00
Parameters:
Model: SR1030B62.
Measuring range: 0.005 ~ 3,000 um/s (speed).
Measurement accuracy: ±0.2% (speed).
Resolution: 0.001 um/s (speed).
Measurement principle: optical non-contact measurement.
Measurement period: about 1 second (speed).
Display mode: LCD.
Output signal: RS-232C (according to JIS X-6081).
Power supply: AC100V (50/60Hz).
¥ 6,035.00
Series:
The S72402-NANANA is part of Kollmorgen’s S700 servo drive family.
Parameters and specifications:
Rated voltage: 230V.
Power and current: The rated line power for S1 operation is 18 kVA and the peak output current is 48 A RMS.
Voltage range: 208-480 V.
Maximum DC bus link voltage: 900 V.
¥ 6,205.00
Parameters and specifications:
Total input and output: The number of digital outputs is 2.
Measuring range: 0… 600 bar; 0… 8700 psi; 0… 60 MPa.
System interface: threaded connection G 1/4 internal thread.
Working voltage: 18… 30 DC.
Current loss: < 35 mA.
Output quantity: 2.
Output signal: switch signal; IO-Link (configurable).
Electrical design: PNP/NPN.
Short circuit protection: Yes, the type is pulse.
Overload protection: Yes.
Response time: < 3 ms.
Ambient temperature: -25… 80 °C.
Storage temperature: -40… 100 °C.
Shell protection class: IP 65; IP Address 67.
¥ 4,036.00
Parameters and specifications:
Weight: There are two possible weights for ABB CI858 depending on the product description. One weighs 700 grams (1.5 pounds) including the base, and the other describes the weight as 0.3 kilograms.
Input voltage: 24VDC.
Current: 100 mA.
Communication protocol: PROFIBUS DP.
Operating temperature: -40°C to +85°C.
Storage temperature: -40°C to +85°C.
¥ 5,262.00
Parameters and Specifications :
Type : Digital Input Module
Number of Channels : Specified by ABB (multiple input channels)
Input Signal : Accepts and processes digital sensor input signals such as switch states, sensor triggers, etc.
Response Speed : High-speed response for quick detection of input signal changes.
Signal Isolation : Uses signal isolation technology to prevent interference and electrical noise between input signals.
Flexibility : Supports flexible configuration options for parameter adjustments through software or hardware settings.
Reliability : High-quality hardware and strict production processes ensure high reliability and stability.
¥ 4,152.00
Parameters and Specifications :
Type : Servo Driver
Control Principle : Servo Control
Voltage Range : 208/120 V to 480/277 V (Dependent on model)
Current Rating : 24 Amps (Dependent on model)
Frequency : 50/60 Hz
Power Rating : 18 KVA (Dependent on model)
Protection Class : IP20
¥ 4,521.00
Parameters and specifications:
Working power supply: 220V/380V ±10% 50HZ.
Ambient temperature: -10℃~40℃.
Protection level: IP20.
Electromagnetic compatibility and CE marking: comply with EMC Directive 2004/108/EC.
Electromagnetic radiation and immunity: tested according to EN 61000-6-4 and EN 61000-6-2 EMC.
Electrical safety: UL508, IEC/EN 61131-2.
¥ 6,203.00
Parameters and specifications:
Flow range: 0-10 m/s
Pipe size: 1/2 inch – 240 inch
Accuracy: +/- 1%
Temperature range: -40°C to 150°C
Power Supply: 100-240VAC, 50/60Hz
Output: 4-20mA, RS485 Modbus, relay
Ultrasonic frequency: 1MHz or 500KHz
Measurement period: 1 second (default)
Pipeline materials: steel, stainless steel, cast steel, cast iron, copper, PVC, aluminum, etc
Protection Class: IP67 (sensor), IP65 (transmitter)
Communication protocols: Modbus RTU, M-Bus, BACnet, LonWorks, Profibus DP
¥ 6,205.00
Parameters and Specifications :
Input/Output Signals : Supports 16 digital inputs and 16 digital output signals1 .
Programmable Modes and Logic : Equipped with programmable working modes and logic1 .
Fault Diagnosis and Self-test : Has built-in fault diagnosis and self-test capabilities1 .
Communication Protocol : Supports Modbus communication protocol1 .
Operating Voltage Range : 24VDC to 48VDC1 .
Working Temperature Range : -20°C to 60°C1 .
Working Humidity Range : 5% to 95% (non-condensing)1 .
Safety Ratings : IEC 61508 SIL 3, IEC 61511 SIF 3, EN1 .
¥ 5,236.00
Parameters and Specifications :
Power Supply : 24 VDC1
Maximum Power Consumption : Approx. 30 W1
Memory : 128 MB1
Communication Interfaces : Ethernet, Serial, USB, etc.1
Control Axes : Up to 16 axes1
Control Precision : Up to 0.1 micrometer1
Maximum Speed : Up to 10 m/s1
Control Cycle : 1 ms1
Programming Languages : Multiple programming languages based on IEC 61131-3 standard, such as LD, ST, FBD, SFC, etc.1