Grid view List view

Showing 205–216 of 19874 results

GE IC695CRU320-EN

¥999.00

Product Parameters

  1. Rack Type: 10-slot rack unit, compatible with GE RX3i series PLC modules (CPU, I/O, communication, and specialty modules)
  2. Power Distribution: Integrated power bus supporting 24 VDC input, with overcurrent and overvoltage protection
  3. Signal Transmission: Backplane bandwidth of 1 Gbps, enabling high-speed data transfer between modules with minimal latency
  4. Operating Temperature Range: -40°C to 70°C (-40°F to 158°F), suitable for extreme industrial conditions
  5. Physical Dimensions: 350 mm × 120 mm × 85 mm (13.78 in × 4.72 in × 3.35 in), DIN rail mountable (EN 50022 standard)
  6. Weight: 1.8 kg (3.97 lbs), lightweight yet robust for easy installation and maintenance
  7. Certifications: UL 508, CE, IEC 61131-2, and ATEX certified, meeting global safety and performance standards
  8. Module Compatibility: Fully compatible with GE IC695CPU, IC695I/O, IC695COMM, and IC695 specialty modules
  9. Environmental Protection: IP20 rating for dust protection, with a corrosion-resistant aluminum alloy chassis
  10. Operating Humidity Range: 5% to 95% (non-condensing), adapting to humid industrial settings

GE IC695CRU320

¥2,599.00

Product Parameters

Parameter Category Specifications
Brand & Model GE IC695CRU320
Product Type PLC Control Rack Unit (CRU) for RX3i Series
Slot Capacity 10 expansion slots (supports CPU, I/O, communication, and specialty modules)
Power Distribution Integrated redundant power supply interface; 24 VDC distributed power output
Thermal Management Built-in active cooling fan; passive heat dissipation fins; temperature monitoring sensor
Operating Temperature -40°C to 75°C
Storage Temperature -55°C to 85°C
Humidity Resistance 5% – 95% non-condensing
Vibration & Shock Resistance IEC 60068-2-6 (vibration); IEC 60068-2-27 (shock) compliant
Form Factor Rack-mounted; 3U height; 19-inch standard rack compatible
Dimensions (W x H x D) 483 mm x 132 mm x 350 mm
Certifications UL 508, CE, ATEX, IEC 61131-2, ISO 9001 compliant
Weight 5.2 kg

GE IC695CPU374

¥5,299.00

Product Parameters

  1. Processor Performance: 32-bit RISC processor with a clock speed of 1.2 GHz, supporting parallel execution of control logic and data processing
  2. Memory Capacity: 256 MB DDR3 RAM (expandable up to 1 GB) and 512 MB non-volatile flash memory for program storage
  3. I/O Capacity: Supports up to 8,192 digital I/O points and 1,024 analog I/O points through expansion racks
  4. Communication Protocols: Native support for Ethernet/IP, Modbus TCP, Profinet, and DNP3; optional support for BACnet and OPC UA
  5. Operating Temperature Range: -40°C to 70°C (-40°F to 158°F), suitable for harsh industrial environments
  6. Power Supply: 24 VDC (18-32 VDC) input, with redundant power supply support for high-availability applications
  7. Programming Software: Compatible with GE Fanuc Automation iFIX and Proficy Machine Edition (version 9.0 and above)
  8. Physical Dimensions: 140 mm × 85 mm × 120 mm (5.51 in × 3.35 in × 4.72 in), DIN rail mountable
  9. Certifications: UL 508, CE, ATEX, and IEC 61131-2 compliant, meeting global industrial safety standards

GE IC695CPU320

¥5,299.00

Product Parameters

Parameter Category Specifications
Brand & Model GE IC695CPU320
Processor Type 32-bit high-performance RISC processor
Clock Speed 1.5 GHz
Memory Capacity 4 GB DDR4 RAM; 16 GB industrial-grade non-volatile flash memory
I/O Capacity Supports up to 16384 digital I/O points; 2048 analog I/O points
Communication Ports 4 x Gigabit Ethernet ports; 2 x RS-485 serial ports; 2 x USB 3.0 ports; 1 x HDMI port
Operating Temperature -40°C to 75°C
Power Supply 24 VDC (18-36 VDC input range); 6 W typical power consumption
Programming Software GE Fanuc VersaPro, GE CIMPLICITY, GE iFIX
Certifications UL 508, CE, ATEX, IEC 61131-3, ISO 9001 compliant
Form Factor Rack-mounted; 3U height; fully compatible with GE RX3i rack systems

GE IC695CPU31

¥2,599.00

Product Parameters

Parameter Category Specification Details
Brand & Model GE IC695CPU31
Product Series GE PACSystems RX3i PLC Compact Mid-Range CPUs
Processor Type 32-bit dual-core industrial-grade microprocessor (optimized for standard control tasks)
Program Memory 64 MB non-volatile flash memory (battery-free data retention, shock-resistant)
Data Memory 32 MB RAM (expandable up to 128 MB via industrial-grade memory modules)
Execution Speed 0.08 microseconds per boolean instruction; 0.2 microseconds per floating-point instruction
Supported Communication Protocols Ethernet/IP, Modbus TCP, GE SRTP (native support for mainstream industrial networks)
I/O Capacity Supports up to 32,768 discrete I/O points and 4,096 analog I/O points
Ethernet Ports 2 x 10/100/1000 Mbps Gigabit Ethernet ports (supports basic network redundancy)
Security Features Basic access control, firmware integrity verification, compliance with industrial EMC standards
Operating Voltage 5V DC (powered by RX3i chassis backplane, low power consumption)
Operating Temperature Range 0°C to 60°C
Storage Temperature Range -40°C to 85°C
Humidity Tolerance 5% – 95% (non-condensing, moisture-resistant circuitry)
Physical Dimensions 85mm × 130mm × 70mm (DIN rail mountable, RX3i standard single-slot form factor)
Net Weight Approximately 0.38kg
Certifications UL, CE, CSA, ISO 9001:2015, IEC 61131-3, RoHS compliant, IEC 61000-4-2 (ESD protection)
Mean Time Between Failures (MTBF) ≥ 340,000 hours

GE IC695CPU315-CD

¥2,999.00

Product Parameters

Parameter Category Specifications
Brand & Model GE IC695CPU315-CD
Processor Type 32-bit RISC processor
Clock Speed 1.2 GHz
Memory Capacity 2 GB DDR4 RAM; 8 GB non-volatile flash memory
I/O Capacity Supports up to 8192 digital I/O points; 1024 analog I/O points
Communication Ports 2 x Ethernet (10/100/1000 Mbps) ports; 1 x RS-232/485 serial port; 1 x USB 2.0 port
Operating Temperature -40°C to 70°C
Power Supply 24 VDC (18-32 VDC input range); 5 W typical power consumption
Programming Software GE Fanuc VersaPro, GE CIMPLICITY
Certifications UL, CE, ATEX, IEC 61131-2 compliant
Form Factor Rack-mounted; 3U height; compatible with GE RX3i rack systems

GE IC695CPU310-GV

¥999.00

Product Parameters

Parameter Category Specification Details
Brand & Model GE IC695CPU310-GV
Product Series GE PACSystems RX3i PLC Advanced Compact CPUs
Processor Type 32-bit quad-core industrial-grade microprocessor (optimized for real-time control and multi-tasking)
Program Memory 128 MB non-volatile flash memory (battery-free data retention, shock and vibration resistant)
Data Memory 64 MB RAM (expandable up to 256 MB via industrial-grade DDR memory modules)
Execution Speed 0.05 microseconds per boolean instruction; 0.15 microseconds per floating-point instruction
Supported Communication Protocols Ethernet/IP, Modbus TCP, PROFINET, GE SRTP, OPC UA (native multi-protocol support for industrial connectivity)
I/O Capacity Supports up to 65,536 discrete I/O points and 8,192 analog I/O points
Ethernet Ports 2 x 10/100/1000 Mbps Gigabit Ethernet ports (supports network redundancy and load balancing)
Security Features AES-128 data encryption, role-based access control (RBAC), firmware integrity verification, ISA/IEC 62443 compliance
Operating Voltage 5V DC (powered by RX3i chassis backplane, ultra-low standby power consumption)
Operating Temperature Range 0°C to 60°C
Storage Temperature Range -40°C to 85°C
Humidity Tolerance 5% – 95% (non-condensing, moisture-resistant circuitry)
Physical Dimensions 85mm × 130mm × 70mm (DIN rail mountable, RX3i standard single-slot form factor)
Net Weight Approximately 0.4kg
Certifications UL, CE, CSA, ISO 9001:2015, IEC 61131-3, RoHS compliant, IEC 61000-4-2 (ESD protection), CE EMC marking
Mean Time Between Failures (MTBF) ≥ 360,000 hours

GE IC695CPU310

¥5,299.00

Product Parameters

  1. Product Model: GE IC695CPU310
  2. Module Type: Core PLC processor module (GE RX3i PLC compatible)
  3. Core Processor: 32-bit dual-core microprocessor, clock frequency up to 700 MHz
  4. Program Memory: 2 MB on-board Flash memory (expandable up to 8 MB via memory modules)
  5. Data Memory: 1 MB RAM (with single battery backup for critical data retention)
  6. Instruction Execution Speed: 0.06 microseconds per basic instruction
  7. I/O Capacity: Supports up to 32,768 digital I/O points and 4,096 analog I/O points
  8. Built-in Communication Ports: 1 x RS-232 serial port, 1 x USB 2.0 port, 1 x 10/100 Ethernet port (for programming and diagnostics)
  9. Operating Voltage: DC 5V (powered by PLC backplane)
  10. Operating Temperature Range: 0°C to 60°C
  11. Mechanical Dimensions: 102mm × 152mm × 89mm (length × width × height)
  12. Certifications: CE, UL listed, RoHS compliant

GE IC695CPL410

¥2,599.00

Product Parameters

Parameter Category Specification Details
Brand & Model GE IC695CPL410
Product Series GE PACSystems RX3i PLC High-End Compact CPUs
Processor Type 32-bit quad-core industrial-grade microprocessor (optimized for compact control systems)
Program Memory 192 MB non-volatile flash memory (battery-free data retention, shock-resistant)
Data Memory 96 MB RAM (expandable up to 256 MB via industrial-grade memory modules)
Execution Speed 0.04 microseconds per boolean instruction; 0.12 microseconds per floating-point instruction
Supported Communication Protocols Ethernet/IP, Modbus TCP, PROFINET, GE SRTP, OPC UA (native multi-protocol support)
I/O Capacity Supports up to 65,536 discrete I/O points and 8,192 analog I/O points
Ethernet Ports 2 x 10/100/1000 Mbps Gigabit Ethernet ports (network redundancy support)
Security Features AES-128 data encryption, role-based access control (RBAC), firmware integrity verification, ISA/IEC 62443 compliance
Operating Voltage 5V DC (powered by RX3i chassis backplane, low standby power consumption)
Operating Temperature Range 0°C to 60°C
Storage Temperature Range -40°C to 85°C
Humidity Tolerance 5% – 95% (non-condensing, moisture-resistant)
Physical Dimensions 85mm × 130mm × 70mm (DIN rail mountable, RX3i standard single-slot form factor)
Net Weight Approximately 0.42kg
Certifications UL, CE, CSA, ISO 9001:2015, IEC 61131-3, RoHS compliant, IEC 61000-4-2 (ESD protection), CE EMC marking
Mean Time Between Failures (MTBF) ≥ 380,000 hours

GE IC695CPE400

¥5,999.00

Product Parameters

  1. Product Model: GE IC695CPE400
  2. Module Type: Flagship PLC processor module (GE RX3i PLC compatible)
  3. Core Processor: 32-bit quad-core microprocessor, clock frequency up to 1.5 GHz (industry-leading performance)
  4. Program Memory: 8 MB on-board Flash memory (expandable up to 32 MB via memory modules)
  5. Data Memory: 4 MB RAM (with dual redundant battery backup for 24/7 critical data retention)
  6. Instruction Execution Speed: 0.02 microseconds per basic instruction (ultra-fast response)
  7. I/O Capacity: Supports up to 131,072 digital I/O points and 16,384 analog I/O points
  8. Built-in Communication Ports: 1 x RS-232 serial port, 1 x USB 3.0 port, 2 x Gigabit Ethernet ports (for redundant high-speed communication)
  9. Operating Voltage: DC 5V (powered by RX3i PLC backplane)
  10. Operating Temperature Range: -10°C to 70°C (broad extreme temperature tolerance)
  11. Mechanical Dimensions: 102mm × 152mm × 89mm (length × width × height)
  12. Certifications: CE, UL listed, RoHS compliant, IEC 61508 SIL 2 certified (for safety-critical applications)

GE IC695CPE330

¥1,299.00

Product Parameters

Parameter Category Specification Details
Brand & Model GE IC695CPE330
Product Series GE PACSystems RX3i PLC Enterprise-Grade High-Performance CPUs
Processor Type 64-bit hexa-core industrial-grade microprocessor (optimized for multi-tasking, real-time control, and data analytics)
Program Memory 512 MB non-volatile flash memory (battery-free data retention, shock and vibration resistant)
Data Memory 256 MB RAM (expandable up to 1 GB via industrial-grade DDR4 memory modules)
Execution Speed 0.02 microseconds per boolean instruction; 0.08 microseconds per floating-point instruction
Supported Communication Protocols Ethernet/IP, Modbus TCP, PROFINET, PROFIBUS, GE SRTP, DNP3, OPC UA, MQTT (native multi-protocol support for IIoT)
I/O Capacity Supports up to 131,072 discrete I/O points and 16,384 analog I/O points
Ethernet Ports 6 x 10/100/1000 Mbps Gigabit Ethernet ports (triple redundant networks, load balancing, and dual-network segmentation)
Security Features AES-256 data encryption, built-in next-gen firewall, role-based access control (RBAC), firmware integrity verification, secure boot, ISA/IEC 62443-4-2 compliance
Operating Voltage 5V DC (powered by RX3i chassis backplane, ultra-low power consumption in standby mode)
Operating Temperature Range -10°C to 65°C (extended range for harsh industrial environments)
Storage Temperature Range -40°C to 85°C
Humidity Tolerance 5% – 95% (non-condensing, moisture and dust resistant)
Physical Dimensions 85mm × 130mm × 70mm (DIN rail mountable, RX3i standard single-slot form factor)
Net Weight Approximately 0.55kg
Certifications UL, CE, CSA, ISO 9001:2015, IEC 61131-3, RoHS compliant, ISA/IEC 62443-3-3, IEC 61000-4-2 (ESD protection), CE EMC marking
Mean Time Between Failures (MTBF) ≥ 450,000 hours

GE IC695CPE330-ADAS

¥2,599.00

Product Parameters

  1. Product Model: GE IC695CPE330-ADAS
  2. Module Type: Advanced PLC processor module (GE RX3i PLC compatible)
  3. Core Processor: 32-bit dual-core microprocessor, clock frequency up to 950 MHz
  4. Program Memory: 4 MB on-board Flash memory (expandable up to 16 MB via memory modules)
  5. Data Memory: 2 MB RAM (with enhanced battery backup for critical data retention)
  6. Instruction Execution Speed: 0.035 microseconds per basic instruction
  7. I/O Capacity: Supports up to 57,344 digital I/O points and 7,168 analog I/O points
  8. Built-in Communication Ports: 1 x RS-232 serial port, 1 x USB 2.0 port, 1 x 10/100/1000 Mbps Gigabit Ethernet port (for high-speed data transfer)
  9. Operating Voltage: DC 5V (powered by PLC backplane)
  10. Operating Temperature Range: 0°C to 65°C (extended temperature tolerance)
  11. Mechanical Dimensions: 102mm × 152mm × 89mm (length × width × height)
  12. Certifications: CE, UL listed, RoHS compliant