Showing 18073–18084 of 24490 results

DATX100

¥4,152.00

argument
Processor: Intel Atom dual-core D2550 low power processor, 1.86GHZ
Chipset: Intel D2550+NM10
Memory: 2 x 204Pin DDR3
Hard disk: Support SATA 2.5″ hard disk, SATA, mSATA SSD
Display: Integrated Intel GMA 3600 chip, shared video memory up to 640MB
Network: Two Intel RTL8111E Gigabit Ethernet ports
Audio: Realtek ALC662 6-channel hi-fi audio controller
Power input: Wide voltage 6~30V

3503E

¥6,235.00
argument
Input signal: Support a variety of input signals, including 24V AC/DC digital input, analog input, etc.
Input channels: Each input signal is processed by three independent channels, which ensures that even if one channel fails, the other two channels continue to work.
Recommended input range: For digital inputs, the recommended range is 20-42.5 volts DC.
Maximum voltage: 42.5 volts AC/DC.
specification
Size: Depending on the search results, there are different size descriptions such as 263337 mm and 21 cm (possibly length)
Weight: About 0.2 kg
Support system: PLC/DCS system.
Color: Standard color.
Shape: Square.

HIEE300900R0001

¥4,165.00

argument
Model: HIEE300900R0001
Brand: ABB
Operating voltage:
In some descriptions it is 220V
In another description it is 24VDC
Output frequency: 50HZ
Output voltage range: 5VDC
Output current:
Max. 10A
Rated current 5A
Efficiency: greater than 90%
Operating temperature:
-20°C to +50°C
-40℃ to 85℃
Storage temperature:

MVI56E-MNETC

¥6,205.00
argument
Interface type: Modbus TCP/IP
Number of clients: Up to 30 Modbus clients are supported
Number of Modbus servers: Up to 20 Modbus servers are supported
Communication rate: 10/100 Mbps transmission rate is supported
Power requirements:
The available 5VDC power consumption is 800mA
The power consumption of available 24VDC power supply is 3mA
specification
Compatibility: Especially compatible with Rockwell Automation’s ControlLogix platform
Occupied slot: Occupies a single slot in the ControlLogix chassis
Configuration tool: ProSoft Configuration Builder (PCB) is required to input the configuration of the module
Version requirements: Version 16 or later if used with additional instructions (AOI/AOC); To use with the provided example ladder diagram program, version 15 or later is required

CI867K01

¥4,069.00

specification

Size:
170mm x 105mm x 32mm
40 * 40 * 30
127.5 mm long x 185 mm high x 59 mm wide
Weight:
About 120g
3.5 kg
0.62 kg
2KG

M9494F1003

¥6,255.00

specification
Model: M9494F1003
Size:
Product size: 166mm x 112mm x 36mm
Size mentioned at maximum output current (may be incorrect, should be a different specification or package size) : 3.94 x 7.28 x 4.13 inches (100 x 185 x 105 mm)
Weight: 1.3 kg
Case material: aluminum or stainless steel

FBM230 P0926GU

¥5,623.00

specification
Product net weight: Depending on the search results, there are 1.8kg mentioned, there are also about 120g mentioned. This may be due to the existence of different models or configurations.
Product depth: 217 mm.
Product height: 344 mm.
Net length: 217 mm.
Product width: 132 mm.

ALE111-S50

¥4,850.00

argument
Module type: 4-wire analog output
Number of channels: 4
Voltage range: 0-10 V
Gain range: 0.1-10
Offset range: -5-5
Communication protocol: Modbus
Power supply voltage: 24 VDC, 12 VDC, 220 VAC

DCP71150C012010H0

¥6,548.00

argument
Input voltage: 115 V AC or 230 V AC
Output voltage: 12V DC
Output current: 104 A (Note: “104. 2” in the original search results may be an input error, should be “104 A”)
Power: 1250 W
Efficiency: Up to 95%
Operating temperature: -20°C to +60°C
Humidity: 5% to 95% non-condensing
specification
Dimensions: 260 mm x 127 mm x 63 mm
Weight: 3.5 kg

SDCS-CON-4

¥5,695.00

argument
Working voltage: 24VDC
Operating temperature: -20°C to 60°C
Storage temperature: -40°C to 85°C
Humidity: 5% to 95% non-condensing
Switch quantity: up to 40 in 40 out, analog quantity up to 8 in 4 out
Rated voltage: May vary by version or configuration, there is mention of 60HZ
Current: may reach 100-400A (mentioned in some information)
specification
Model: SDSS-CON-4
Type: Programmable Logic Controller (PLC)
Instruction processor: hard PLC
Structure: Modular structure
Installation method: guide rail installation, fixed hole installation

S30361-NA DANAHER

¥4,269.00

trait
High quality: The use of advanced mechanical structure and electronic technology, with high reliability, high precision and high efficiency.
Multiple control modes: Supports a variety of different control modes and functions, which can be selected and configured according to actual requirements.
Strong adaptability: suitable for a variety of different industrial application scenarios, can adapt to different working environments and circuit requirements.
Security protection: It has a security protection function to ensure the safety and stability of the operation.
Easy installation and maintenance: easy to upgrade and retrofit.

IC695CRU320-BB

¥6,425.00

argument
Working voltage: 24VDC
Communication interface: RS-485
Communication rate: 9600bps
Measurement range: 0 to 5000ppm (this may be the measurement range for specific applications, depending on the sensor configuration)
Processor: Intel Atom (mentioned in some information)
Memory: 2GB DDR3 (mentioned in some information)
Memory: 32GB SSD (mentioned in some information)
specification
Model: IC695CRU320-BB
Type: Redundant programmable automation controller
Installation mode: wall hanging
Material: Aluminum alloy shell