Parameters and specifications
Overall dimensions: 44.5mm x 213.4mm x 281.9mm
Weight: 1.25kg
Power requirements: 100-240 VAC, 50/60 Hz, automatic adaptation
Maximum sampling rate: 10 KS/s
Number of channels: 96 differential /192 single-ended
Input type: Support voltage, current, resistance, capacitance, thermocouple, thermistor, strain gauge and other input types
Interface type: SCXI front-end module interface, SMB impedance adapter interface
Maximum voltage range: ±500 V differential /±250 V single-ended
Resolution: 16 bits
Parameters and specifications
Model: MR-J2S-350B-EG171
Power: 3.5KW
Rated voltage: 220V
Speed response frequency: 50KHz
Product certification: CCC
Applicable motor: HC-SFS352
series
Series: MR-J2S series
Parameters and specifications
Brand: ABB
Model: IMAS011
Control principle: Data communication through CP, support PROFIBUS and industrial Ethernet bus system
Connected equipment: programmer, PC, SIMATIC HMI man-machine interface system, numerical control device, robot control, industrial PC, drive controller, etc
I/O Design:
ET 200M: Fail-safe digital/analog input and output modules for centralized or distributed applications (Cat.4/SIL3 can only be used with isolation modules)
ET 200S PROFIsafe: Fail-safe digital input and output module for distributed applications
Functions: Support the user’s programming, debugging and maintenance work, with high-speed execution of instructions (instruction execution time up to 0.01μs) and floating point arithmetic and other functions
Parameters and specifications
Application: It is often used in the control system of instruments, PLC, and other low-voltage and low-power electrical equipment to resist conductive interference.
Features:
The use of isolation transformers is mainly to deal with conducted interference from the power supply. Using an isolation transformer with an isolation layer, most of the conducted interference can be isolated before the isolation transformer.
At the same time, it can also have the role of power supply voltage transformation.
In some applications, such as fiber transmission Profibus DP bus, with 155M dual optical interface, support peer-to-peer transmission, data, bus arbitration, etc., while achieving high rate long-distance transmission, electrical and ground line isolation, reduce interference and other performance.
Other parameters: Possible industrial grade design, IP30 protection rating, corrugated aluminum reinforced housing, 35mm DIN rail mounting, DC(9-36)V wide power input, relay alarm output, dual power redundancy, and isolation protection.
Parameters and specifications
Product type: Analog input interface module.
Input type: General purpose (analog sensor signal).
Number of analog input channels: 8.
Input range:
FBM201:0 to 20 mA DC
FBM201b: 0 to 100 mV DC
FBM201c: 0 to 5 V DC
FBM201d: 0 to 10 V DC.
Power consumption: 7 W (Max).
Heat dissipation: 3 W (Max).
Operating temperature: -40 to +70°C (-40 to +158°F).
Relative humidity: 5 to 95% (non-condensing).
Altitude: -300 to +12,000 m (-1,000 to +40,000 ft).
Parameters and specifications
Product type: Digital input 24VDC
Rated voltage: 24VDC
Logic 1:15 VDC or 2.5mA (minimum)
Logic 0:5 VDC or 1mA (Max)
Input current:
Secondary load voltage L+(no load) Max. 90mA
From the backplane bus 5VDC maximum 130mA
Photoelectric isolation: 500VAC, 1 minute isolation group 4
Allowable operating temperature: 55°C
Cable length: 500m with shielding, 300m without shielding
Parameters and specifications
Brand: Emerson
Type: Digital input module
Application scenarios: Industrial automation control systems, especially DCS (Distributed control systems) and Emerson DeltaV control systems
Main function: Receive digital signals (such as high level, low level) from sensors, switches and other devices, and convert them into a format that the control system can recognize for subsequent processing
series
Series: The 5X00070G04 itself is a specific model, not a series. But it is part of Emerson’s industrial automation portfolio.
Parameters and specifications
Input voltage: 18-30 VDC
Input current: 50 mA
Vibration channels: 2
Vibration input: 4-20 mA
Measuring range: 0-20 g
Operating temperature range: -40℃ to +85℃
Housing material: aluminum
Power supply voltage: 18-30 VDC
Installation: Portable or mounted on the machine
Weight: Approx. 0.45kg (approx. 450g)
dimension
Product size: 166mm x 112mm x 36mm
Parameters and specifications
Input voltage range: Support 12-48VDC input voltage, suitable for different power supply conditions.
Output voltage and current: Provides a stable 5VDC output voltage with a maximum output current capability of 10A.
Efficiency: greater than 90%, ensuring efficient use of energy.
Operating voltage: 5V.
Operating temperature range: can operate at ambient temperatures from -20°C to +50°C (or -40°C to 85°C, depending on the description).
Storage temperature range: Safe storage from -40°C to +70°C.
Ambient humidity: Suitable for 5% to 95% relative humidity (no condensation).
High speed switch: 5ns (Max).
High level output voltage: 4.5V (min).
Low output voltage: 0.5V (Max).
Maximum power consumption: 10mA.
Size and weight
Dimensions: 170mm x 105mm x 32mm
Weight: About 120g