Grid view List view

Showing 1141–1152 of 20827 results

GE IC697CHS782

¥5,299.00

Product Parameters

Parameter Category Specifications
Brand & Model GE IC697CHS782
Product Type Control Head Station for GE Series 90-70 PLC
Slot Capacity 8 full-size expansion slots (supports CPU, I/O, communication, and specialty modules)
Backplane Type 16-bit parallel backplane; supports high-speed inter-module communication
Power Distribution Integrated power supply interface; 5 VDC and 24 VDC distributed output for modules
Compatible Power Supplies GE IC697PWR710, IC697PWR711, IC697PWR720 (redundant power support optional)
Operating Temperature 0°C to 60°C
Storage Temperature -40°C to 85°C
Humidity Resistance 5% – 95% non-condensing
Vibration & Shock Resistance IEC 60068-2-6 (vibration: 10-500 Hz); IEC 60068-2-27 (shock: 30g peak acceleration)
Form Factor Rack-mounted; 19-inch standard industrial rack compatible; 5U height
Dimensions (W x H x D) 483 mm x 216 mm x 280 mm
Certifications UL 508, CE, IEC 61131-2, ISO 9001, RoHS compliant
Weight 6.8 kg

GE IC697BEM763

¥5,299.00

Product Parameters

  1. Expansion Type: Genius Bus expansion module, exclusive to GE Series 90-70 PLCs for remote I/O rack integration
  2. Communication Protocol: Native support for GE Genius Bus, with optimized frame structure for low-latency data transmission
  3. Maximum Remote Racks: Supports up to 10 remote I/O racks, doubling the scalability of entry-level expansion modules
  4. Total I/O Capacity: Up to 1,280 digital I/O points or 320 analog I/O points across all connected remote racks
  5. Transmission Distance: Up to 1,500 meters (4,921 feet) with shielded twisted-pair cable; extendable to 3,000 meters with signal repeaters
  6. Operating Temperature Range: -40°C to 70°C (-40°F to 158°F), resilient to extreme industrial temperature fluctuations
  7. Power Consumption: 2.8 W (typical) at 24 VDC input, 3.4 W (max), energy-efficient for 24/7 continuous operation
  8. Physical Dimensions: 110 mm × 80 mm × 130 mm (4.33 in × 3.15 in × 5.12 in), DIN rail mountable (EN 50022 standard)
  9. PLC Compatibility: Fully compatible with GE Series 90-70 CPU modules (IC697CPU731, IC697CPU780, IC697CPU790) and all Genius I/O modules
  10. Certifications: UL 508, CE, IEC 61131-2, ATEX, and IEEE 1613 compliant, meeting global safety and industrial standards
  11. Operating Humidity: 5% – 95% (non-condensing), adaptable to humid or moisture-prone industrial settings
  12. Mechanical Protection: IP20 dust protection rating, with a rugged flame-retardant plastic chassis

GE IC697BEM742

¥999.00

Product Parameters

Parameter Category Specifications
Brand & Model GE IC697BEM742
Product Type Backplane Expansion Module for GE Series 90-70 PLC
Compatibility GE Series 90-70 PLC systems; compatible with all Series 90-70 CPU modules and I/O modules
Expansion Capacity Supports up to 3 remote expansion racks per module
Data Transfer Speed 10 Mbps (backplane communication bus)
Operating Voltage 5 VDC (powered directly from Series 90-70 backplane)
Power Consumption 1.8 W typical
Operating Temperature 0°C to 60°C
Storage Temperature -40°C to 85°C
Humidity Resistance 5% – 95% non-condensing
Vibration & Shock Resistance IEC 60068-2-6 (vibration); IEC 60068-2-27 (shock) compliant
Form Factor Rack-mounted; single-slot design for Series 90-70 standard racks
Dimensions (W x H x D) 36 mm x 127 mm x 229 mm
Certifications UL 508, CE, IEC 61131-2, ISO 9001 compliant
Weight 0.35 kg

GE IC697BEM733

¥999.00

Product Parameters

  1. Expansion Type: Genius Bus expansion module, dedicated to GE Series 90-70 PLCs for remote I/O rack connectivity
  2. Communication Protocol: Native support for GE Genius Bus, enabling high-speed data transmission between CPU and remote I/O modules
  3. Maximum I/O Capacity: Supports up to 8 remote I/O racks, with a total of 1,024 digital I/O points or 256 analog I/O points
  4. Transmission Distance: Up to 1,200 meters (3,937 feet) between CPU rack and remote racks with standard cabling
  5. Operating Temperature Range: -40°C to 70°C (-40°F to 158°F), suitable for extreme industrial conditions
  6. Power Consumption: 3.0 W (typical) at 24 VDC input, 3.6 W (max), energy-efficient for continuous operation
  7. Physical Dimensions: 110 mm × 80 mm × 130 mm (4.33 in × 3.15 in × 5.12 in), DIN rail mountable (EN 50022 standard)
  8. PLC Compatibility: Fully compatible with GE Series 90-70 CPU modules (IC697CPU731, IC697CPU780) and Genius I/O modules
  9. Certifications: UL 508, CE, IEC 61131-2, and ATEX compliant, meeting global industrial safety and performance standards
  10. Operating Humidity: 5% – 95% (non-condensing), adapting to humid industrial settings
  11. Mechanical Protection: IP20 dust protection rating with a rugged plastic chassis

GE IC695PHS001

¥999.00

Product Parameters

Parameter Category Specifications
Brand & Model GE IC695PHS001
Product Type Pulse & Positioning Module for GE RX3i Series PLC
Control Axes Up to 4 independent motion axes (configurable for pulse output or encoder input)
Pulse Output Frequency 1 MHz max per axis (supports both step/direction and CW/CCW pulse modes)
Encoder Input Support 500 kHz max per axis (compatible with incremental encoders: A/B/Z phase)
Motion Control Modes Point-to-point positioning, linear interpolation, circular interpolation, speed control, torque control
Output Type Differential transistor output (24 VDC, 0.5 A per channel)
Input Voltage 24 VDC (18-36 VDC input range)
Power Consumption 4.0 W typical
Operating Temperature -40°C to 75°C
Storage Temperature -55°C to 85°C
Compatibility Fully compatible with all GE RX3i CPU modules and control racks (IC695CRU320, IC695CRU320-EZ)
Form Factor Rack-mounted (single-slot design for RX3i 3U rack units)
Dimensions (W x H x D) 44 mm x 132 mm x 322 mm
Certifications UL 508, CE, ATEX, IEC 61131-2, ISO 9001, RoHS compliant
Weight 0.58 kg

GE IC695PBM300-CC

¥5,299.00

Product Parameters

  1. Backplane Type: 10-slot passive backplane, dedicated for GE RX3i series PLC modules (CPU, I/O, communication, specialty modules)
  2. Data Transmission Bandwidth: 1 Gbps full-duplex, enabling high-speed data exchange between connected modules with minimal latency
  3. Power Distribution: Integrated 24 VDC power bus with overcurrent protection, supporting up to 20 A total load for connected modules
  4. Module Compatibility: Fully compatible with GE RX3i CPU modules (IC695CPU374, IC695CPU380), I/O modules, and communication modules (IC695EMT001, IC695NKT002)
  5. Operating Temperature Range: -40°C to 70°C (-40°F to 158°F), suitable for extreme industrial environments
  6. Physical Dimensions: 350 mm × 120 mm × 85 mm (13.78 in × 4.72 in × 3.35 in), DIN rail mountable (EN 50022 standard)
  7. Weight: 1.6 kg (3.53 lbs), lightweight for easy installation and rack assembly
  8. Certifications: UL 508, CE, IEC 61131-2, and ATEX compliant, meeting global industrial safety and performance standards
  9. Operating Humidity: 5% – 95% (non-condensing), adapting to humid industrial settings
  10. Mechanical Protection: Corrosion-resistant aluminum alloy chassis with IP20 dust protection rating

GE IC695PBM300

¥999.00

Product Parameters

Parameter Category Specifications
Brand & Model GE IC695PBM300
Product Type Backplane Memory Module for GE RX3i Series PLC
Memory Architecture Dual-memory design (program storage + data logging partition)
Total Memory Capacity 32 GB industrial-grade non-volatile flash memory
Program Storage Partition 16 GB (for PLC logic, firmware, and configuration files)
Data Logging Partition 16 GB (for real-time sensor data, event logs, and process records)
Data Transfer Speed 150 MB/s read; 100 MB/s write
Communication Interface Integrated backplane interface (direct connection to RX3i CPU)
Operating Temperature -40°C to 75°C
Storage Temperature -55°C to 85°C
Power Consumption 2.5 W typical (24 VDC input)
Input Voltage 24 VDC (18-36 VDC input range)
Compatibility Fully compatible with all GE RX3i CPU modules and control racks (IC695CRU320, IC695CRU320-EZ)
Form Factor Rack-mounted (single-slot design for RX3i 3U rack units)
Dimensions (W x H x D) 44 mm x 132 mm x 312 mm
Certifications UL 508, CE, ATEX, IEC 61131-2, ISO 9001, RoHS compliant
Weight 0.5 kg

GE IC695NKT002

¥2,599.00

Product Parameters

  1. Communication Ports: 2 x 10/100/1000 Mbps Gigabit Ethernet ports (RJ45), supporting auto-negotiation, full-duplex mode, and network redundancy
  2. Supported Protocols: Native support for Ethernet/IP, Modbus TCP, Profinet IO, OPC UA, and DNP3; optional support for MQTT for IoT integration
  3. Data Transfer Rate: Maximum throughput of 1 Gbps per port, enabling high-volume real-time control data and large-file transmission
  4. PLC Compatibility: Fully compatible with all GE RX3i CPU modules (including IC695CPU374, IC695CPU380) and RX3i rack units (4-slot, 10-slot, 16-slot)
  5. Operating Temperature Range: -40°C to 70°C (-40°F to 158°F), suitable for extreme industrial conditions
  6. Power Consumption: 2.7 W (typical) at 24 VDC input, 3.5 W (max), energy-efficient for continuous 24/7 operation
  7. Physical Dimensions: 140 mm × 85 mm × 120 mm (5.51 in × 3.35 in × 4.72 in), DIN rail mountable (EN 50022 standard)
  8. Certifications: UL 508, CE, ATEX, IEC 61131-2, and IEEE 802.3 compliant, meeting global industrial safety and networking standards
  9. Operating Humidity: 5% – 95% (non-condensing), adapting to humid industrial settings
  10. Firmware Support: Field-upgradable via GE Proficy Machine Edition (v9.5 and above) for protocol expansion and security enhancements
  11. Protection Features: Built-in ESD protection (±8 kV contact, ±15 kV air) and surge protection for Ethernet ports

GE IC695NKT001

¥5,299.00

Product Parameters

Parameter Category Specifications
Brand & Model GE IC695NKT001
Product Type Network Keying Module for GE RX3i Series PLC
Security Features Hardware-based authentication, configuration locking, user access partitioning, audit logging
Keying Modes Local keying, network keying, enterprise-level centralized keying
Authentication Methods USB key authentication, password protection, role-based access control (RBAC)
Audit Log Capacity 10,000 event logs (non-volatile storage, retrievable via GE software)
Communication Interface 1 x USB 2.0 port (for local key management); 1 x RJ45 Ethernet port (for network key sync)
Operating Temperature -40°C to 75°C
Storage Temperature -55°C to 85°C
Power Consumption 2.2 W typical (24 VDC input)
Input Voltage 24 VDC (18-36 VDC input range)
Compatibility Fully compatible with all GE RX3i CPU modules, control racks, and communication modules
Form Factor Rack-mounted (single-slot design for RX3i 3U rack units)
Dimensions (W x H x D) 44 mm x 132 mm x 310 mm
Certifications UL 508, CE, ATEX, IEC 61131-2, ISO 9001, IEC 62443 (industrial cybersecurity) compliant
Weight 0.45 kg

GE IC695NIU001

¥5,599.00

Product Parameters

  1. Communication Ports: 1 x 10/100 Mbps Fast Ethernet port (RJ45), supporting auto-negotiation and full/half-duplex modes
  2. Supported Protocols: Native support for Ethernet/IP, Modbus TCP, and Profinet IO; compatible with GE’s Proficy software suite for seamless integration
  3. Data Transfer Rate: Maximum throughput of 100 Mbps, optimized for real-time control data and non-time-sensitive monitoring data
  4. PLC Compatibility: Fully compatible with all GE RX3i CPU modules (IC695CPU374, IC695CPU380) and RX3i rack units (4-slot, 10-slot, 16-slot)
  5. Operating Temperature Range: -40°C to 70°C (-40°F to 158°F), suitable for harsh industrial environments
  6. Power Consumption: 2.2 W (typical) at 24 VDC input, 2.8 W (max), energy-efficient for continuous operation
  7. Physical Dimensions: 140 mm × 85 mm × 120 mm (5.51 in × 3.35 in × 4.72 in), DIN rail mountable (EN 50022 standard)
  8. Certifications: UL 508, CE, IEC 61131-2, and IEEE 802.3 compliant, meeting global industrial safety and networking standards
  9. Operating Humidity: 5% – 95% (non-condensing), adapting to humid industrial settings
  10. Firmware Support: Field-upgradable firmware via GE Proficy Machine Edition (v9.0 and above) for protocol enhancements and bug fixes

GE IC695LRE001

¥1,159.00

Product Parameters

Parameter Category Specifications
Brand & Model GE IC695LRE001
Product Type Redundant Ethernet Module for GE RX3i Series PLC
Communication Speed 10/100/1000 Mbps (Gigabit Ethernet, auto-negotiation)
Network Ports 2 x RJ45 Gigabit Ethernet ports (redundant configuration); LED status indicators for link, activity, and failover
Supported Protocols Ethernet/IP, PROFINET IO, Modbus TCP, DNP3, UDP/TCP
Failover Time < 50 ms automatic switchover between redundant ports
Operating Temperature -40°C to 75°C
Storage Temperature -55°C to 85°C
Power Consumption 3.5 W typical (24 VDC input)
Input Voltage 24 VDC (18-36 VDC input range)
Compatibility Fully compatible with all GE RX3i CPU modules (IC695CPU315, IC695CPU320) and control racks (IC695CRU320, IC695CRU320-EZ)
Form Factor Rack-mounted (single-slot design for RX3i 3U rack units)
Dimensions (W x H x D) 44 mm x 132 mm x 325 mm
Certifications UL 508, CE, ATEX, IEC 61131-2, ISO 9001, RoHS compliant
Weight 0.65 kg

GE IC695HSC304

¥5,299.00

Product Parameters

  1. Counter Channels: 4 independent high-speed counter channels, supporting simultaneous operation without interference
  2. Maximum Input Frequency: 1 MHz per channel, capable of handling high-speed pulse signals from incremental encoders and pulse generators
  3. Counting Modes: Up-count, down-count, up/down count, pulse-width measurement, and frequency measurement modes
  4. Input Type: Differential quadrature (A/B phase) and single-ended inputs, compatible with NPN/PNP sensors and 5V/24V encoder signals
  5. Count Range: 32-bit signed integer (-2,147,483,648 to 2,147,483,647) per channel for extended measurement scope
  6. Output Signals: 4 configurable alarm outputs (PNP/NPN, 2A @ 24VDC) for threshold-based control actions
  7. PLC Compatibility: Fully compatible with all GE RX3i CPU modules (IC695CPU374, IC695CPU380) and RX3i rack units (10-slot, 16-slot)
  8. Operating Environment: Temperature range of -40°C to 70°C (-40°F to 158°F); humidity range of 5% – 95% (non-condensing)
  9. Physical Dimensions: 140 mm × 85 mm × 120 mm (5.51 in × 3.35 in × 4.72 in), DIN rail mountable
  10. Certifications: UL 508, CE, IEC 61131-2, and ATEX compliant, meeting global industrial safety and performance standards