Showing 15829–15840 of 19874 results
¥ 3,026.00
Parameters and Specifications :
Signal Type : Analog input
Number of Channels : 4
Input Ranges : ±10 V, ±5 V, ±2.5 V, ±1 V, 0 to 10 V, 0 to 5 V (selectable per channel)
Resolution : 16 bits
Sampling Rate : Up to 250 kS/s per channel
Accuracy : Specified in the NI documentation
Input Impedance : Specified in the NI documentation
¥ 6,032.00
Parameters and Specifications :
Type : USB 3.0 Host Controller
Interface : USB 3.0 SuperSpeed (up to 5 Gbps)
Ports : Number of ports may vary depending on the specific implementation or module.
Compatibility : Supports USB 2.0 and USB 1.1 devices as well.
Dimensions and Weight :
Exact Dimensions : Not readily available as they depend on the specific module or implementation.
Weight : Also not readily available as it depends on the specific module or implementation.
¥ 6,235.00
Parameters and Specifications :
Model : D20-EME
Brand : GE (General Electric)
Type : (Likely a component or device from GE’s industrial or power generation products)
Electrical Rating : Specific ratings would depend on the intended application and configuration.
Environmental Ratings : Likely designed for industrial or power plant environments.
Dimensions and Weight :
Exact Dimensions : Not readily available without a specific datasheet or product manual.
Weight : Similarly, the weight would depend on the specific configuration and materials.
¥ 5,021.00
Parameters and Specifications :
Signal Type : Analog input module
Channels : 4 channels
Input Range : ±10 V, ±5 V, ±2.5 V, ±1 V, 0 to 10 V, 0 to 5 V (selectable per channel)
Resolution : 16 bits
Sampling Rate : Up to 250 kS/s per channel
Accuracy : Specified in the NI documentation
Input Impedance : Specified in the NI documentation
¥ 4,625.00
Parameters and Specifications :
Type : 3500/22M
Brand : Bently Nevada
Measurement : Vibration
Sensor Type : Velocity Transducer
Frequency Range : Typically used for low-to-medium frequency vibration monitoring1
Sensitivity : Specified by the manufacturer, typically expressed in mV/mm/s or mV/in/s
Operating Temperature Range : Specified by the manufacturer, typically a wide range for industrial applications
¥ 4,125.00
Parameters and Specifications:
Rated Voltage: Single-phase 220~240V or three-phase 220V or 380~460V. Commonly, the rated voltage for low-voltage inverters in China is three-phase 380V.
Rated Frequency: Typically industrial frequency of 50Hz or 60Hz, with 50Hz being the standard in China.
Input Voltage: 24VDC.
Output Voltage: 24VDC.
Maximum Output Current: 10A.
Operating Temperature Range: -40℃ to 70℃.
¥ 6,342.00
Parameters and Specifications:
Model: MVME5100-0161
Brand: MOTOROLA
Series: MVME Series
Operating Voltage: 220V
Output Frequency: Can vary depending on the application and configuration, but may be around 60kHz
Product Certifications: PLC Module DCS Module
Dimensions and Weight:
Exact Dimensions and Weight: Not explicitly provided in the search results.
¥ 4,265.00
Parameters and Specifications:
CPU: Dual PowerPC 440 processor
Memory: 128MB SDRAM, 128MB Flash
Communication Ports: Two pairs of 100 Mbps Ethernet ports, two pairs of EIA-232 ports, one EIA-485 port
Power Supply Voltage: 14 VDC (+/- 10%)
Operating Temperature Range: -40°C to +70°C
Storage Temperature Range: -55°C to +85°C
Humidity: 4% to 95% non-condensing
Vibration: 2 g RMS, 10 to 500 Hz
Control Function Block Execution Speed: 16,000 function blocks/second
Configurable Control Modules: Up to 8,000
Control Cycle: From 0.05 seconds to 60 minutes
¥ 4,562.00
Parameters and Specifications:
Type: Electronic power board
Application: Used in excitation systems of electric generators
Power Output: Provides the required power voltage and current for the excitation system
Voltage Regulation: Adjusts the output voltage of the electric generator based on need
Overcurrent Protection: Protects the excitation system from damage due to current overload
Communication Interface: May include interfaces for communication and data transmission with generator control or monitoring systems
Operating Temperature: (-22°F to +150°F) or (0-55℃)
Humidity: 95%, non-condensing
Dimensions and Weight:
Exact Dimensions and Weight: Not explicitly provided in the search results.
¥ 4,025.00
Parameters and Specifications:
Processor: MC68020 microprocessor and MC68881 coprocessor
Features: Intelligent single-board processor module
Maximum Continuous Output Current: 0.5 A
On-board Diagnostics: Advanced vehicle diagnostics
Safety Integrity Level (SIL): SIL3
Compliance: EN 954-1 Category 4
¥ 4,265.00
Parameters and Specifications:
Model: EASYGEN-3200 (specific model numbers may vary, e.g., EASYGEN-3200-5 8440-1992 A)
Application: Gas turbine control
Control Mode: Digital
Functions: Speed and load control, combustion control, exhaust temperature control, vibration control, fault protection
Interfaces: Analog input/output, digital input/output, RS-232/RS-485 communication interfaces
Environmental Conditions: Operating temperature: -40°C to +70°C, humidity: 5% to 95% non-condensing
Protection Level: IP65
Dimensions and Weight:
Size: Approximately 600 x 400 x 200 mm
Weight: Approximately 30 kg (for EASYGEN-3200-5 8440-1992 A)
Series: EASYGEN 3200 Series
¥ 4,685.00
Parameters and Specifications:
Processor Type: MPC860 (or similar, depending on sources)
Clock Frequency: 48 MHz
Memory: 16 MB RAM for applications, 7.155 MB flash memory for storage
Ethernet Connectivity: Built-in redundant Ethernet communication ports
Serial Ports: RS-232C port (COM3) with modem control signals, isolated port (COM4) for configuration tool
Power Supply: 24V DC (19.2V-30V DC)
Power Consumption: 6.0W (max 10.3W)
Communication Protocols: Supports Ethernet, PROFIBUS DP, and other standard protocols
Dimensions and Weight:
Size: 262612
Weight: 0.24kg