Voltage: Different sources give different voltage ranges, such as 24V DC, 12-48VDC, and 180V. This may be due to differences in different models or application scenarios.
Current: For current, there are references to 100-400A, and there are also references to a maximum of 10A. This may also vary by model.
Efficiency: In certain cases, the efficiency is greater than 90%.
CPU: Some information indicates the use of a 32-bit RISC processor.
specification
Brand: ABB
Type: Controller module
Support customization: No
Input voltage range: The input voltage range of the DS200FGPAG1A may vary depending on the search results. One says 12-48VDC, while another mentions that the device is rated at 220V for use in power measurement and power management applications. For the latter, however, it may refer to the voltage that the DS200FGPAG1A feeds into the grid when it acts as a smart meter, rather than the input voltage of the device itself.
Output voltage: When used as a power module or similar device, the DS200FGPAG1A may have an output voltage of 5VDC and a maximum output current of 10A.
Efficiency: greater than 90%.
Measurement accuracy: 0.2 (when used as a smart meter).
High performance processor: The module is usually equipped with a high performance processor to achieve fast response and efficient control.
Multi-purpose control: Designed for a variety of control applications, it can be programmed and configured to meet different control needs.
Communication interface: Equipped with communication interfaces, such as Ethernet and other standard interfaces, to facilitate data exchange and integration with other devices.
Generator protection: In power system applications, this module usually includes a protection function for the generator to ensure that appropriate measures are automatically taken to protect the safe operation of the generator under adverse conditions.
Measuring range: 1.0 kilonewtons (kN).
Accuracy: With high measurement accuracy, it can provide accurate force or pressure measurement results.
Output signal: Usually use analog signal output, such as 4-20mA signal or 0-10V signal, and digital signal output, such as RS485 communication interface.
specification
Structure: Small, compact sensors for easy installation and integration into devices.
Material: High quality material is used to ensure the reliability and stability of the sensor.
Protection level: There is usually a certain level of protection to protect the sensor from the external environment.
Analog output channels: 32 high quality analog output channels with 12-bit resolution
Output impedance: 0.8Ω
Output voltage range: unipolar (0 to +10V, 0 to +5V, zero to +2.5V) or bipolar (±2.5, ±5 and ±10V) software optional
Output current: can output or receive 10 mA at ±10V voltage
specification
Each output: A dedicated D/A converter (DAC)
Calibration and self-test: initiated by the VME bus system reset or by the execution of software commands
Offset and gain coefficients: During calibration, a table of offset and gain coefficients is compiled and stored in RAM
Industrial grade design: anti-vibration, anti-electromagnetic interference and durable, suitable for a variety of harsh industrial environments.
Modular design: easy to expand and upgrade, improve system flexibility and maintainability.
Multiple input and output channels: The ability to monitor multiple process variables and perform related operations to meet complex control needs.
Communication interface: Ethernet or serial communication interface that supports connection and communication with other devices or systems.
Function: Labeled as a power brake buffer, it is part of General Electric’s Mark V series.
Electrical specifications: Support constant torque 575 v AC for a 375 HP motor and variable torque 380 V AC for a 300 HP motor.
Connector type: Four-pin connector for connecting the power supply/interface board (IMCP) and DS200ITXDG1ABA board.
specification
Inverter and dynamic brake buffer board control: Control via power/interface board (IMCP).
Board mount: To be mounted externally, its dimensions must meet the worst switch requirements for dynamic braking IGBTs.
Size and weight
Weight: Approximately 0.8KG
Operating voltage: AC110V±10%, the limit operating voltage is AC99V (low voltage) and AC121V (high voltage).
Voltage protection: It can absorb reverse electromotive force higher than DC160V, and the high voltage protection point is AC145V.
Input pulse frequency: maximum 130KHz.
specification
Matching motor: brushless motor (no Hall sensor required), speed range 0~30000RPM, power range from 1000W without fan to 2000W with fan.
Parallel drive: A maximum of 255 drives can be connected in parallel.
Communication interface: Support Modbus, with RS-232, RS-485 and other communication interfaces.
Input voltage: Usually 24VDC.
Output voltage: This may be -0.6V DC in some configurations, but please note that this may not be its standard output feature, depending on the application scenario.
NVRAM: 8 KB.
Voltage range: 220VDC May be supported in some cases, but this may not be its primary operating voltage range.
Current: The 100-400A current range is mentioned in some descriptions, but this may not be a direct parameter for the PM864A, but is confused with relevant parameters for other ABB products.
Output frequency: 50HZ, but again this may not be a direct parameter of the PM864A, but rather a parameter related to ABB power electronics controllers or similar devices.
Processor: Uses an 80386EX processor with a speed of 25MHz.
Memory: The maximum user program memory is 32K bytes.
Scan rate: The typical scan rate of a CPU is 0.22 ms /K.
Communication interface: Equipped with a built-in serial port supporting SNP/SNP-X slave protocol and a LAN port supporting multipoint, Ethernet, FIP, Profibus, GBC, GCM and GCM+ option modules.
Power requirements: 670 MA from +5 VDC power supply required.
Function support: Support shift register, override, battery backup clock, PCM/CCM compatibility, periodic subroutine interrupt function, floating point math, RAM and flash storage.
Input power supply: three-phase AC200V ~ 230V ± 10%.
Output capacity: 0.75kW (there is also information that the output power is 1.5kW).
Control mode: pulse direction control or vector control.
Control accuracy: ±5%.
Frequency: 45Hz to 65Hz.
Output current: 7.0A (when the output power is 1.5kW).
Speed control range: 0-3000 RPM.
Torque control range: 0-300%.
Size: According to the latest search results, it measures 130mm x 130mm x 80mm (5.12 inches x 5.12 inches x 3.15 inches).
Weight: About 5.0 kg (11.0 lb), but there is also information that it weighs 2KG.
trait
High torque density: for demanding applications.
Fast response time: Suitable for applications requiring fast motion control.
High accuracy: Ensures precise motion control.
Multiple optional functions: Meet various application requirements.
