Grid view List view

Showing 15673–15684 of 20827 results

B&R X20CP1485

¥3,206.00

Parameters and Specifications:

  • Processor: Intel Celeron 6501.
  • Memory: 32 MB DRAM, 1 MB SRAM, expandable memory via CompactFlash2.
  • Interfaces: 1 X20 IF module slot, 2 USB ports, 1 RS232 port, 1 Ethernet (10/100 Base-T) port, 1 ETHERNET Powerlink interface2.
  • Supported System: PLC/DCS System3.

Dimensions and Weight:

  • Size: 263337 (Specification)3. However, a more detailed dimension (e.g., in mm) is not provided.
  • Net Weight: 2.3 kg3.

FOXBORO FBM230

¥4,125.00

Parameters and Specifications:

  • Input Voltage: 24VDC
  • Output Voltage: 0 ~ 10VDC
  • Output Current: 0 ~ 20mA
  • Control Type: PID1

Dimensions and Weight:

  • Size: 120mm × 80mm × 35mm
  • Weight: 0.5kg1

Mitsubishi Q12HCPU

¥6,235.00
Parameters and specifications:
Program capacity: 124K steps (or 496K bytes).
Input and output points: both input and output points are 4096 points, and the total number of input and output points is 8192 points.
Basic command processing speed: The LD command processing speed is 34ns (nanoseconds).
Memory capacity: 496k.
Performance specifications: The control mode adopts the repeated operation of the stored program, and the input and output control mode is refresh mode.
Number of files: 124.
Consumption current: DC5V internal consumption current 0.64A.
Size and weight:
Dimensions: Height 98mm, width 27.4mm, depth 89.3mm.
Weight: 0.20Kg.

ABB IMMFP12

¥4,265.00
Parameters and specifications:
Power requirements: +5VDC 2A, typical value 10 watts.
Memory: 512kbytes ROM, 512kbytes RAM, 256 kbytes NVRAM.
Serial ports: Two RS-232-C ports, or one RS-485 and one RS-232-C port, all of which link signals at rates up to 19.2 kbaud.
Redundant communication link rate and type: 1 Mbaud serial link.
Voltage range: 220VDC.
Operating temperature range: 50~80℃.
Input/output voltage: Input voltage is 24VDC, 48VDC, output voltage is 24VDC.
Input/output range: Input range is MA 224, output range is MA 122.

ICS TRIPLEX T8480C

¥3,265.00
Parameters and specifications:
Model: T8480C
Enter the score: 32
Input type: numeric input
Voltage range: 24 volts DC
Consumption: Max. 5W
Operating temperature: -40°C to 70°C
Storage temperature: -55°C to 85°C
Humidity: 5% to 95% (non-condensing)
Protection level: IP67
Isolation voltage: 250V RMS
Surge voltage: 4kV
Noise suppression: 500V/μs

YASKAWA CACR-SR20BE12G-E

¥6,235.00

Parameters and specifications:

Function: YASKAWA CACR-SR20BE12G-E is a device that regulates the speed of DC motors. The upper end is connected to the AC power supply, the lower end is connected to the DC motor, by controlling the armature DC voltage to adjust the speed of the DC motor.
Working principle: The DC governor converts alternating current into two output DC power supplies, one input to the DC motor excitation (stator), one input to the DC motor armature (rotor). At the same time, the DC motor gives the governor a feedback current, and the governor judges the speed of the DC motor according to the feedback current, and corrects the armature voltage output if necessary to adjust the speed of the motor again.

ABB 3HAC12928-1 REV8

¥4,036.00

Parameters and Specifications:

  • Model: 3HAC12928-1 REV8
  • Brand: ABB
  • Instruction Execution Speed: Basic instructions range from 0.58μs to higher-level instructions at 1.62μs (MV instruction)1
  • I/O Points: Depending on the configuration, it can have 10, 14, or 16 I/O points1
  • Program Memory: Up to 16,000 steps1
  • Instruction Count: Approximately 110 basic instructions and 210 higher-level instructions1

GE 8851-LC-MT

¥3,062.00
Parameters and specifications:
Interface type: LC
Transmission rate: 10/100/1000Mbps
Working wavelength: 1310nm
Transmit power: -9.5dBm~0dBm
Receiving sensitivity: -20dBm
Maximum transmission distance: 10km
Operating temperature: -40℃~85℃
Power Supply: 3.3V or 12V DC controller power (depending on application)
Compatibility: IEEE802.3z standard

GE DS2020FECNRX010A

¥6,235.00
Parameters and specifications:
Brand: GE/ General Electric
Model: DS2020FECNRX010A
Control principle: Other
Processing customization: No
Range and accuracy: Specific values are not clearly given
Size: DS2020FECNRX010Amm
Power amplifier board function: has set point S1 PQM SETUP\CLEAR DATA\CLEAR ENERGY VALUES for clearing data, when the value 4294967295(FFFFFFFF h) is reached, the displayed value will scroll to 0. In addition, negative watt-hours (kWh) and positive varhours(kvarh) since the last reset date are displayed.

ABB 3AFE61320946P0001

¥3,541.00

Parameters and Specifications:

  • Transmission Rate: Up to 12 Mbps1.
  • Supported Technology: Supports ring redundancy technology1.
  • Power: 24V redundant power supply1.
  • Ports: Two optical and one electrical port1.
  • Connectors: All connections are designed as EEX-e terminals1.
  • Enclosure: Stainless steel or plastic enclosure with or without a viewing window1.

Kollmorgen CB06560

¥4,152.00
Parameters and Specifications:
Brand: Kollmorgen
Series: S600 Series (also known as S600 Drive Series)
Operating Voltage: Multiple voltages may be supported, but the specific value is not explicitly given in the search results.
Output Frequency: 60Hz
Operating Temperature: Recommended between -25 ° C and +70 ° C
System Function: Automatic
Color: Blue (Drive color is blue)

ABB 64711245C

¥2,365.00

Parameters and Specifications:

  • Functionality: Reduces the load on the main CPU1.
  • Communication Interface: Compatible with Advant controllers’ communication interfaces such as CS513 and MasterBus 3001.
  • Maximum Distance Supported: Using fiber optic cables, the maximum distance between two stations can be extended to 3500 meters (11480 feet)1.
  • Transmission Speed: Max RCOM/RCOM+ transmission speed is 19200 bits/second1.