Motherboard system information: The module is equipped with Intel(R) Atom D2550 Atom processor, the main frequency is 1.86GHz, and the second-level cache is 1MB. The system chip is Intel D2550+NM10, uses Award BIOS, and supports ACPI. It is also equipped with a Type II CF card slot as an electronic disc.
I/O interface: The IS200RAPAG1B supports MINI PCIE ports, SATA/IDE ports, and USB ports, and also provides a variety of interface options such as parallel ports and serial ports to meet different connection requirements.
GPIO port: Provides an 8-bit GPIO port with four inputs and four outputs.
Size and weight:
Size: Its size is 100*260mm.
Weight: Approximately 0.13 kg.
Operating voltage: The range is 220v~380v, which enables it to adapt to the voltage requirements of various industrial application scenarios.
Rated power: Up to 1.5A at USB full load 0.5A.
Clock accuracy: The maximum shift per day is 2 seconds.
Specifications:
Execution speed: 0.072 ms per 1000 Boolean instructions.
Number of blocks: A maximum of 512 blocks are supported.
Size and weight:
Size: The exact size may vary depending on the product version and specific configuration, but there is a version of 100mm * 260mm.
Weight: Approximately 2KG.
Measurement range: A wide range of current measurements, capable of measuring currents from a few milliamps to thousands of amps. The voltage measurement range also covers both low and high voltage systems. In addition, it can also measure parameters such as active power, reactive power, total power and electrical energy.
Communication interface: supports a variety of communication protocols, such as Modbus, Profinet, etc., allowing the sensor to exchange data with the host computer, PLC or other intelligent devices.
Size and weight:
Size: Specific size parameters may vary from source to source or product version. Some sources indicate that its specification size is 302022mm, while others mention that its size is 110*210mm.
Input voltage: 220VAC.
Output voltage: 24VDC.
Maximum output current: up to 5A.
Operating temperature range: -20℃ to +50℃.
Protection rating: IP67, which means it has some dust and water resistance.
Size and weight:
Size: According to some data, its size is 100mm x 80mm x 40mm; Other sources indicate a size of 24mm x 58mm x 65mm. The exact size may vary depending on the product version or market availability, it is recommended to refer to the official documentation or contact the supplier for accurate information.
Weight: 500g.
Input type: Support 1-Phase/Single Phase, input voltage range of 85 VAC to 264 VAC, 90 VDC to 350 VDC, with a wide voltage input range, can adapt to different power environment.
Output power and voltage: The output power is 500 W with two output channels, channel 1 has an output voltage range of 24.7 VDC and an output current range of 20 A.
Accuracy level: The accuracy level of current and voltage is 0.2.
Size and weight:
Dimensions: Length 194 mm, width 113.6 mm, height 138 mm.
Weight: about 3 kg.
Processor: This module is a 16-bit processor module.
Memory: It has 64 KB of user program memory and 32 KB of data memory.
Input and output: The module has 16 digital inputs, 16 digital outputs, and 8 analog inputs.
Power supply: Its power supply is 24 V AC/DC.
Size and weight:
Dimensions: The module measures 90 x 110 x 60 mm.
Weight: It weighs 1.2 kg.
Processor: It’s equipped with a 1Ghz Celeron M processor with 64MB of RAM.
Communication interface: Supports two serial communication ports, including RS232 and RS485 communication standards. In addition, there are Ethernet ports and USB ports.
Battery backup: Up to 64MB of battery backup RAM is supported, ensuring data security and integrity in the event of a power failure.
Size and weight:
Weight: Depending on the data, its weight may be around 1.26KG or close to 0.9kg.
Dimensions: Its overall dimensions are 71mm x 138mm x 131mm.
Type: IS200VSVOH1B is a power module or servo control board. The type and application scenario may vary according to the configuration and use.
Channels and outputs: With multiple channels and discrete output channels, the voltage and current of each channel can be independently controlled.
Programming configuration: With the characteristics of programmable configuration, convenient for users to carry out flexible control and application according to actual needs.
Wavelength range: 190~1100 nm.
Wavelength accuracy: ±1nm (within 200nm~900nm band).
Wavelength resolution: 0.1nm.
Bandwidth: 2nm.
Photometric range: ±3 ABS.
Stray light: 220nm > 3.3ABS.
Reading mode: A reading mode with transmittance, absorbance, and concentration.
Communication interface: includes USB1.1, USB interface, and interface for connecting computers, printers, and external keyboards.
Power supply: 200~240V, 50/60 Hz.
Input type: The module can monitor up to 12 RTD (Resistance Temperature Detector) inputs for stator, bearing, environmental or other temperature monitoring.
RTD Type: Each RTD type can be field-programmed to be 100Ω platinum (DIN 43760), 100Ω nickel, 120Ω nickel or 10Ω copper.
Specifications:
RTD circuit compensation: When using a three-wire RTD, the module automatically compensates the wire resistance.
Lead resistance: The lead resistance should not exceed 25Ω (platinum/nickel type RTD) or 3Ω (copper type RTD) per lead.
