Showing 16237–16248 of 20827 results
¥ 4,265.00
Parameters and specifications:
Series: B&R IPC (Industrial Computer) series.
Other parameters: Due to the wide range of B&R product lines, and the specific parameters may vary depending on different configurations and application scenarios, the exact parameters and specifications of the 5C5601.32 cannot be directly given. But in general, B&R’s IPC products provide high-performance processors, sufficient memory and storage space, rich I/O interfaces and communication interfaces.
¥ 4,255.00
Parameters and Specifications :
Sensor : 1/1.4″ CMOS
Resolution : 2352 x 1726 pixels1
Pixel Size : 7.0μm x 7.0μm1
Frame Rate :
4-way TAP mode: 48 fps
8-way TAP mode: 96 fps1
Exposure Time : 0.05μs to 170 ms1
Pixel Depth : 8-bit/12-bit/14-bit1
Output Interface : Camera Link1 2
Power : 12 VDC2
¥ 5,241.00
Parameters :
Power Rating : 55 kW
Voltage : Three-phase AC380-500V 50/60Hz
Current : 96A
Control Modes : Speed Control, Torque Control, PID Control, or Other1
Frequency : 50/60 Hz2 3
IP Rating : IP212 3
Specifications :
Series : ACS880
Type : Wall-mounted single drive4
Protection Levels : IP20, IP21, and IP557
Communication : Supports a wide range of fieldbus protocols, I/O, and encoder options4
¥ 6,032.00
Parameters and Specifications :
Model Number : FCP270 P0917YZ
Brand : Foxboro (Schneider Electric)
Memory : 16 MB SDRAM, 32 MB Flash Memory
Input Voltage (Redundant) : 24 V DC typical
Power Consumption (per non-fault-tolerant module) : Maximum 8.5 W
Operating Temperature : 0 to +60°C (+32 to +140°F)
Configuration : Single processor module, with patented fault-tolerant operation using two control modules for enhanced reliability1
Dimensions :
Length: 14.7 cm
Width: 5.15 cm
Height: 11.4 cm
¥ 6,425.00
Parameters and Specifications :
Model : PPC-R22.1N-T-Q1-P2-NN-FW
Brand : Rexroth
Power Supply Voltage : 200V to 480V2
Frequency (f) : 48 … 63 Hz
Input Voltage : 380 … 480 V
Installation Type : Wall Mounted
Number of Phases : 3
Output Current (Normal Use) : 15.6 A
Output Power (Normal Use) : 7.5 kW
Net Weight : 3.3 kg1
¥ 6,325.00
Parameters
Input Signal : Current or Voltage
Output Signal : 4-20 mA DC
Isolation Voltage : 2500V RMS
Accuracy : 0.1%
Operating Temperature : -40°C to 85°C
Humidity : 5% to 95% non-condensing
Specifications
Size : 112mm x 70mm x 123mm
Weight : Approximately 0.5kg
Voltage Range : 20 to 32Vdc
Data Rate : 250Mbps
Power Consumption : 40W
¥ 5,602.00
Parameters and Specifications :
Input Voltage : 24V DC
Output Voltage : 24V DC
Operating Temperature : -40°C to 85°C
Storage Temperature : -40°C to 85°C
Humidity : 10% to 95%, non-condensing
Communication Interfaces : Ethernet, RS232, RS485
Power Consumption : Maximum 22 watts (for TRICONEX 3009)1
Dimensions : 120mm x 80mm x 30mm (for TRICONEX 3511)2
Weight : 0.2kg (for TRICONEX input/output communication card)3 4
¥ 6,235.00
Parameters and Specifications
Model : DSQC679
Brand : ABB
Type : Robot Teaching Pendant
Compatibility : For ABB Robot IRC5 Series1 2
Program Capacity : 3MB (as mentioned in one source)3
Data Capacity : 2MB (as mentioned in one source)3
Working Voltage : 38V (as mentioned in one source)4 , also 220V3
Output Frequency : 24Hz (as mentioned in one source)4
Processing Speed : 220μs (as mentioned in one source)4
I/O Points : 20 (as mentioned in one source)4
LD Instruction Processor : Hard PLC3 4
Environmental Temperature : 80℃ (as mentioned in one source)4
Environmental Humidity : 20% (as mentioned in one source)4
¥ 6,035.00
Parameters
Processor Type : RISC
Processor Speed : 1.5 GHz (Note: There are also references to 1.2 GHz1 and 166 MHz2 .)
Memory Capacity : 512 MB
Storage Type : DDR2 SDRAM
Communication Interfaces : Ethernet, Serial Port, CAN Bus
Operating Temperature : -20℃ ~ +60℃
Power Supply Voltage : 24V DC
¥ 4,625.00
Parameters
System Power Supply Voltage Range : 20 to 32V dc
Input Quantity : 40 channels (for analog input modules)
User-Defined Threshold : 4-off
Input Current Range : 0-22mA
Input Voltage Range : 0-6 Vdc
Sample Update Time : 0.5 milliseconds
Resolution : 3.9 microamperes (1/256 milliamperes)
Safety Accuracy : ±1% of full scale (default threshold, above which will trigger 0x70nn series fault)
Calibration Accuracy : 0.03%
Recommended Input Channel Calibration Check Interval : 2 years
Circuit Type : Fault-tolerant, fully triplicated
Working Temperature : -40°C to +70°C (or -25°C to 70°C depending on source)
Non-working Temperature : -25°C to 70°C
Operating Humidity : 10–95% RH non-condensing
¥ 6,035.00
Processor: Pentium III 1.2 GHz, there is also reference to 266 MHz clock rate.
Memory: 512 MB RAM (one specification), there are also sources that mention 1024 kB of internal RAM or 2gb (another specification).
Communication interface: Support Ethernet, Modbus, Modbus Plus, CANopen and other communication interfaces.
Operating temperature: 0-60°C (one specification), there are also references to -20 °C ~ 60°C (another specification).
Input power: 3.3VDC.
Working voltage: 24V.
Current: 100-400A.
Size: 14.3 x 10.2 x 2.5 cm (one size).
Weight: 0.45kg (one specification), there are also references to 2KG (another specification) or 1.23kg (another specification).
¥ 5,698.00
Parameters
Rated Current : 20A
Accuracy : ±0.5%
Frequency Range : DC-100kHz
Operating Temperature Range : -40℃ to +85℃
Relative Humidity : 5% to 95%
Output Signal : Voltage Output
Specifications
Enclosure Material : Epoxy Resin
Installation Method : Plug-in Type
Dimensions : 44mm x 31mm x 22mm
Weight : 30g
Insulation Resistance : 100MΩ
Voltage Endurance : AC2.5kV/1min