Processor: High performance industrial grade processor
Memory: Flash, RAM (capacity depends on configuration)
Interface: Ethernet, serial port, CAN bus, etc
Power supply: DC 24V
Protection Class: IP20 (usually installed in the control cabinet)
Operating temperature: -20℃ to +60℃
specification
The PM861AK01 is part of ABB’s AC 800M control system, which is known for its high reliability, high performance and modular design and is widely used in industrial automation
Size and weight
Dimensions: One search result mentions dimensions of 250×190×180mm³,
I/O type: digital input, digital output, analog input, analog output
Number of channels: 32
Isolation voltage: 2500 Vrms
Operating temperature: Depending on the model and version, the temperature range may vary. Such as -40°C to +70°C or -20 °C to +70°C
specification
Communication interface: Support Ethernet, serial port and other communication interfaces, in order to exchange data and communication with other control systems and monitoring systems
Scanning mode (applicable only to DC 12V version) : two-dimensional image scanning
Scan speed (for DC 12V version only) : 400 times per second
Scanning depth (only applicable to DC 12V version) : 5~60cm
argument
Module type: isolated three channel analog input
Input range: voltage -10V to +10V, current 4mA to 20mA
Resolution: 16 bits
Accuracy: ±0.1%
Sampling rate: 1000 Hz
Communication interface: RS-485
specification
Processor: 32-bit processor with 33MHz main frequency (as a programmable logic controller)
Memory: Equipped with 1MB RAM and 4MB flash memory (when used as a programmable logic controller)
Redundant architecture: Three-module redundant (TMR) architecture to ensure high availability and fault tolerance (when acting as a programmable logic controller)
System memory: 8MB (mentioned elsewhere, but note that it may be relevant to specific applications or configurations)
Display color: 99.9% (This parameter may refer to the display’s color display capability, but note that it may be relevant to a specific application or configuration)
argument
Processor: The controller is equipped with a 1 GHz CPU and uses an Intel Celeron-M microprocessor.
Memory: 64 MB of non-volatile flash memory and 64 MB of battery-operated random access memory (RAM).
Power requirements: +3.3 volts DC 1.0 amp nominal value, +5 volts DC 1.2 amp nominal value.
Operating temperature: 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit), but in some sources it is mentioned that the operating temperature range may be wider, such as -40 ° C to 85 ° C.
specification
Processing speed: 1 GHZ.
Floating-point arithmetic: Supported.
Time clock accuracy: Maximum drift of 2 seconds per day.
Embedded communication: Support for RS-232, RS-485 (RS-486 in some sources).
Supported serial protocols: Modbus RTU slave, SNP, Serial I/O.
Blocks: Up to 512 blocks, with a maximum block size of 128KB.
argument
Processor: 300 MHz Intel Celeron.
Memory: 16 MB flash, 32 MB DRAM.
I/O port: One 10BaseT/100BaseTX (RJ-45) Ethernet port.
Working voltage: AC 100V-240V, power 10W.
Operating temperature: -20℃~+60℃, storage temperature: -40℃~+80℃.
Humidity: 20%~95%.
specification
Dimensions: There are mentions of 233 x 89 x 44 mm, there are also mentions of 100mm x 50mm x 25mm, this may be due to different application scenarios or configuration caused by the differences.
Weight: 0.5kg.
argument
Processor: PowerPC processor with powerful processing power.
Memory: The module contains two Simm memory modules with a capacity of 16 MB or 8 MB.
Communication interface: including Ethernet, serial port, USB, CAN, Profibus and other communication interfaces.
Operating temperature range: -40℃~70℃.
specification
Multi-core processing: Supports parallel processing of multiple tasks.
Real-time control function: with powerful data processing capabilities, real-time monitoring of motor running status.
Sensor inputs: The standard system has 10 sensor inputs, which can be expanded to 30.
IS200TSVOH2B is often described as a power control board, especially for medium frequency power control.
It can also be used as a control redundancy power configuration, compatible with FIP redundancy systems, with speeds up to 100MHZ.
Input and output:
It usually has a variety of input and output voltages to meet the needs of different devices.
Protection function:
It is equipped with over current protection, over voltage protection, under voltage protection and other protection functions to ensure the stable operation and safety of the equipment.
argument
Processor: High performance industrial grade processor.
Memory: Contains flash memory and RAM, the specific capacity depends on the configuration.
Power supply: DC 24V.
Protection level: IP20 (usually installed in the control cabinet), but there are also references to IP30 or IP67 protection levels, which may refer to specifications for different versions or application scenarios.
Operating temperature: -20℃ to +60℃.
specification
Interface: Support Ethernet, serial port, CAN bus and other communication protocols and interfaces.
Modular design: easy to install, maintain and upgrade.
Scalability: Supports multiple input and output channels and can be expanded according to actual needs.
