Showing 13681–13692 of 21200 results
¥5,200.00
1.Parameters:
- Model: IC754VSI06STD-LH
- Brand: GE
- Display Size: 6 inches12
- Memory: 512 KB SRAM with battery backup2
2.Specifications:
- Type: Fast Panel Display/Controller12
- Interface: Supports PLC and other industrial automation systems12
- Resolution: Not specified, but typically high for a 6-inch display2
- Power Supply: Industrial standard, typically 24VDC or compatible12
3.Dimensions:
- Approximate dimensions: 14″ x 12″ x 10″ (L x W x H)2
- Display area dimensions: Not specified, but tailored to a 6-inch panel2
¥5,266.00
–Series:
- Part of a series of distributed I/O systems designed for precise control and stability in industrial environments.
–Parameters:
- Voltage: Typically 24VDC, though some specifications may vary12.
- Current: Depending on the application, it can handle a range from 100A to 400A2.
- Power: 240VDC with a reflection of 3.6A1 (note: this specific power rating may vary based on different sources).
–Specifications:
- Communication: Connects with the main controller and PLC via industrial standard fieldbus3.
- Operating Temperature: -40°C to +85°C1 or -40°C to +100°C2, depending on the specific model or application.
- System Memory: 8MB2.
¥6,255.00
1.Parameters:
- Model: 8B0C0320HW00.002-1
- Brand: B&R Automation
- Minimum Operating Temperature: -20°C
- Maximum Operating Temperature: 100°C1
- Minimum Power Supply Voltage: 4V
- Maximum Power Supply Voltage: 7V1
2.Specifications:
- Type: PROFIBUS Redundancy Link Module2
- Functionality: Converts between single and redundant Profibus DP buses3
- Supported Rates: 10 common rates of Profibus DP3
- Isolation: Optical coupling for reduced interference3
3.Dimensions:
- Length: 4.1mm
- Width: 3.6mm
- Height: 1.8mm1
¥5,416.00
–Parameters:
- Accommodates a variety of 3500 series monitoring modules.
- Supports module-to-module communication and power distribution.
–Specifications:
- Rack size: 19-inch with 14 module slots (full-size rack) for maximum flexibility and expandability12.
- Installation option: Rack-mounted into a 19-inch EIA rack23.
- Power supply: Accepts one or two 3500/15 power modules (AC or DC) for reliable operation14.
–Dimensions and Weight:
- Dimensions: Approximately 48.26 cm x 34.92 cm x 26.59 cm (length x width x height)2.
- Weight: Approximately 4.5 kilograms2.
¥5,268.00
1.Parameters:
- Model: 9905-973
- Brand: Woodward
- Input Voltage: 24VDC, 48VDC1
- Output Voltage: 24VDC1
- Output Current Range: 4~20mA1
- Working Temperature Range: -40°C to +85°C21
2.Specifications:
- Type: Servo Controller3
- Relay Type: Single Pole Double Throw (SPDT)2
- Contact Current: 10A2
- Contact Voltage: 250VAC/DC2
- Resolution: 12-bit1
- Output Accuracy: Less than 0.25%1
¥5,625.00
–Series:
- Part of the Bently Nevada 3500 series of machinery protection and monitoring systems.
–Parameters:
- Four-channel monitor capable of accepting various sensor inputs.
- Supports vibration, position, and other mechanical health measurements.
–Specifications:
- High-precision measurement capabilities for radial vibration, axial position, thrust position, differential expansion, etc.
- User-programmable alarms and thresholds for mechanical protection.
- Compatible with 3500 rack configuration software for easy setup and monitoring.
–Dimensions and Weight:
- Exact dimensions and weight may vary based on the specific model and any accessories included.
- Typically designed for compact integration into machinery protection systems.
¥6,255.00
1.Parameters:
- Model: S22460-SRS
- Brand: Kollmorgen (Danaher)
- Voltage: 24V1
- Current: 100-400A1
- Power: Specific power not directly mentioned, but typically related to current and voltage1
2.Specifications:
- Type: Servo Drive2
- Control Modes: Supports position control, speed control, and torque control21
- Communication Interfaces: EtherCAT, CANopen, Ethernet, serial communication21
3.Dimensions & Weight:
- Dimensions: Approximately 10.6cm x 9.3cm x 2.3cm3
- Weight: Approximately 2kg to 3kg, depending on the source21
¥6,205.00
1.Parameters:
- Model: CC-PFB401
- Brand: Honeywell
- Input Voltage: 24VDC1
- Output Voltage: 24VDC1
- Output Current: 4-20mA1
- Communication Protocol: Supports FOUNDATION Fieldbus H12
2.Specifications:
- Type: Fieldbus Interface Module2
- Number of H1 Networks: 42
- Maximum Fieldbus Devices per H1 Network: 162
- Configuration: Non-redundant or Redundant2
- Update Rates: Available large cycle times ranging from 250ms to 32 seconds2
¥5,254.00
–Specifications:
- Power Requirements: Typically 24VDC (refer to manufacturer’s datasheet for exact specifications)
- Operating Temperature Range: Suitable for industrial environments, with exact range dependent on manufacturer’s specifications
–Dimensions and Weight:
- Dimensions: Approximately 100mm in length (exact dimensions may vary, refer to manufacturer’s datasheet)
- Weight: Lightweight, typically around 2KG (weight may vary depending on the specific model and accessories)
–Series:
- Part of the MVI56 series of communication modules designed by ProSoft Technology
¥6,250.00
.Parameters:
- Brand: National Instruments (NI)
- Model: PXI-8423
- Interface: RS-4851
- Voltage: Input voltage varies, with some listings mentioning 5-24VDC2
2.Specifications:
- Type: Interface Module/Digital I/O Module3
- Output Frequency: Up to 60Hz1
- I/O Capacity: Can vary depending on the configuration, with some models supporting 8-32VDC inputs2
- Signal Processing: Capable of high-speed signal processing and data acquisition4
3.Dimensions & Weight:
- Dimensions: 6.3 x 3.9 inches (160 x 99 mm)1; another source lists 100mm x 50mm x 20mm3
- Weight: Approximately 1.2kg3; another source mentions 1.6kg56
¥5,248.00
-
Parameters:
- Power Supply: 5VDC
- Internal Power: 3.3VDC
- Power Consumption: 1.5W to 2.6W
-
Specifications:
- Material: Aluminum Alloy Housing
- Operating Temperature Range: 0°C to 60°C
- Storage Temperature Range: -40°C to 85°C
- Humidity: 5% to 95% (non-condensing)
-
Dimensions and Weight:
- Size: 17 Slots
- Weight: Approximately 0.29 kg
¥4,259.00
1.Parameters:
- Power Supply: 24V DC1, with some sources mentioning AC 220V2.
- Input Voltage Range: 0-250V AC/DC1.
- Output Current: 0-20mA2.
- Communication Interfaces: Supports Modbus, Profibus, and Ethernet1; RS4852.
2.Specifications:
- Type: PLC Controller Module13.
- Inputs/Outputs: 8 digital inputs, 8 digital outputs, and 4 analog inputs1.
- Current Output: High precision for various control needs3.
